Fungus in the bathroom on the sealant - how to remove?

Silicone sealant is a very important, indispensable component when equipping the room with plumbing fixtures, and it is also needed for various types of work. The sealant forms a layer that will stand well in the face of the threat of temperature drop or aggressive detergents. There are sealants( sanitary silicone), containing in their composition additives, called "fungicidal", which protect the surface from mold and fungus. And here is mold itself and fungi - a very common problem in a bathroom with a sealed coating. Below, useful tips on the topic will be given: the fungus in the bathroom on the sealant - how to remove?

to content ↑

Causes of

The biggest reason is the large amount of humid air in the room. Contributing factors can be:

• poor ventilation system;
• non-insulated walls;
• no good sealing of joints between panels.

Perhaps you have a hermetic coating with a fungicidal additive, and the mold still made it? Then you should think about the quality of the product. Another option is also possible: for example, during the work someone shalthuril and made some mistakes or did a poor job of providing you with a qualitative result.

The reason that the fungus wound up in the bathroom on the sealant is mass. How to remove it and prevent the resumption of colonies - this is something that should be of interest to you. Otherwise, harmful controversies will soon not only spread all over the surface of the bathroom, but also penetrate into your body.

to the contents ↑

Mold damage

Mold can both help a person and hurt. If you find the first signs of the appearance of mold - act immediately.

Mold spread by spores - these are microscopic particles that fly out in the air and settle in other places where their new nucleation can begin.

They damage our respiratory tract, nasopharyngeal organs, digestive system and other vital body systems.

Important! Very dangerous fungus for people with low immunity and allergies.

to the contents ↑

We remove the mold

If it is necessary to remove the mold in the bathroom from the sealant, there are a lot of tools for this. Therefore, do not despair and look for a new place of residence - arm yourself with one of the following means, and act.

Method 1

One of the simplest and safest options:

1. In a small container, mix water and any bath cleaner.
2. Wet the sponge and wipe the contaminated area.
3. Thoroughly wash mold off the surface.

Next it is necessary to disinfect the problem area, so that inconspicuous disputes do not continue to spread:

1. Take, say, bleach on a chlorine base - the usual "Whiteness" is quite suitable.
2. Apply, leave for 15 minutes( if you do not have so much time, you can not wait).
3. Before you wash it off, rub it well into the sealant, so that everything is perfectly absorbed.
4. Wash off, wipe dry.

Substances with a chlorine content have good feedback regarding the fight against the fungus in the bathroom on sealant and other surfaces. It is possible to apply and in such a way:

1. We are bred in the ratio 1: 1.
2. Then spray on the surface.
3. You can not wash off a couple of hours, but it's good to ventilate the room.

Important! The problem is that the treated area can turn yellow - this will have to be reconciled, if you use just such a tool and be ready for such a result.

Method 2

Try to treat the sealant with a specialized chemical aimed at destroying the fungus, and not at all to prevent it. For example, "Neomid 600" proved itself very well.

Method 3

Another simple and cheap tool to remove the fungus in the bathroom is on the sealant:

1. For 4 parts water, 2 parts detergent and ammonia.
2. We are waiting for about half an hour - we need to let the agent soak in.
3. Thoroughly wash with a brush.

Method 4

Removal with borax:

1. We dissolve in water - a ratio of 1 glass to 2.5 liters of water.
2. Wet the old toothbrush and thoroughly clean the contamination site.
3. Later wipe dry with a soft rag.

Important! It is undesirable to wash off the solution, because it forms a protective layer against mold.

Method 5

White table vinegar is probably in every house. In this case, it is useful to you to remove the fungus in the bathroom on the sealant:

1. On the mildewed problem spray neat vinegar through an atomizer.
2. After 60 minutes, rinse with a sponge dampened with water.
3. You may need to repeat the procedure the next day.
4. Do not forget to ventilate the room, as vinegar has a pungent smell and its fumes have a bad effect on our health.

Important! Be careful, as vinegar is an acid that can seize certain types of sealing putty. As a result - you can get rid of not only mold, but also from the sealant itself. It is better to apply this medication( as a regular prophylaxis too) on the tile.

Method 6

Hydrogen peroxide is an excellent antiseptic that will perform its direct function - to fight with fungi:

1. Hydroperite is applied to the sealant in undiluted condition.
2. After a couple of minutes, wipe the sealant with a soft sponge or cloth.

Method 7

Baking soda is another one that is always present in the household, which also provides a cleaning and disinfecting effect. For its application in order to remove mold in the bathtub with sealant:

1. We are bred in a ratio of half a tablespoon to 250 ml of warm water.
2. Rubbing with a hard brush, then rinse.
3. To fix the effect, repeat the procedure.

Method 8

If the mold suddenly turns out to be under tile:

1. It will be necessary to open the interlacing seams using a rasp or an electric milling cutter.
2. We clean seams, we cover with a ground with an antifungal additive.
3. Do the grouting again.

Method 9

Tea tree oil or other essential oils:

1. Mix one teaspoon in a glass of water.
2. Next you need to walk a mixture on the contaminated site.
3. It is not necessary to wash off - the smell will pass through a couple of days.

Important! Essential oils, in particular tea tree, have antifungal, antiseptic effect, and therefore help in the fight against mold.

to the contents ↑

What else can I use?

Here is another small list of tools that will help you:

• ammonia;
• copper vitriol;
• boric acid;
• antifungal spray;
• antifungal agents.

to the contents ↑

Mold comes back!

In some cases mold is returned, and at the same place. The reason is that the root of the problem, in fact, comes from under the sealant layer. Means - it is necessary to remove it:

• In hands we take something sharp and thin, for example, a knife.
• Gently cut the layer over the top and bottom edges of the seam.
• Having picked up, we take out hermetic from a seam.
• Feel free to throw it away, as mold spores have settled there.
• If you find dirt inside the seam, which is likely to be cleaned with a knife.
• We disinfect the seam with isopropyl alcohol - pour, wait 20-30 minutes.
• Then use a soft cloth with an antibacterial agent to moisten the seam( we do not use the bathroom for 24 hours).
• We apply a sealing layer - this time it is desirable with the addition of a fungicide, which does not allow the formation of mold.
• So that the sealant layer is permanently withered, we wait another day.

Everything, your bath is disinfected and looks like new! Now you know what to remove the fungus in the bathroom on the sealant.

to the contents ↑

Prophylaxis

In order to permanently forget about mold, it is necessary to puzzle a few more points:

• Good, high-quality ventilation system. Besides her, do not forget to leave the door ajar - the ventilation system is certainly good, but it can not cope without the influx of air from outside.
• We remove all sources that support moisture. So for example: a dripping faucet, a condensate on the toilet bowl.
• Fracturing. Any crack, be it on the ceiling or floor, contributes to the penetration of mold, even from other apartments.

Well, in principle, and all that you need to know to protect yourself from mold. The main thing is observance of preventive rules, then the fungus will not appear. But if all this happened, then use the above methods to remove the fungus in the bathroom on the sealant. Do not forget that mold damages your health and this is the most important thing - do not be stingy to spend somewhere, because health is above all!