Colour White;
Compressive strength 5 MPa;
Flexural strength 2 MPa;
Consumption 0.2-0.25 kg / m;
Water consumption 1 l / kg;
Application temperature 5 to 30 C;
Start setting 4 minutes;
End of setting 8 minutes;
Application For sealing seams, cracks, making stucco;
Weight 3.000;
Colour White;
Compressive strength 5 MPa;
Flexural strength 2 MPa;
Consumption 0.2-0.25 kg / m;
Water consumption 1 l / kg;
Application temperature 5 to 30 C;
Start setting 4 minutes;
End of setting 8 minutes;
Application For sealing seams, cracks, making stucco;
Weight 5.000;
Model Anti-mildew;
Appointment Destruction and prevention of the development of mold and other types of biodegradants on wood, concrete, brick;
Colour Colorless;
Application For indoor and outdoor use;
Weight 1.000;
The foundation Lime;
Type of work For indoor and outdoor use;
Colour White;
Appointment For the preparation of masonry and plaster mortars, as well as a component of low-grade concrete (for use in dry conditions);
Consumption at a layer thickness of 1 mm 0.11 kg / m;
Weight 20.000;
A type Universal;
The foundation Acrylic;
Type of work For indoor and outdoor use;
Consumption 200 g / m2;
Application temperature Not lower than 5 C;
Drying time 2 hours;
Appointment For pre-treatment and strengthening of surfaces: brick, concrete, plastered, putty, plaster walls and ceilings. For interior decoration of premises before further painting work, as well as for strengthening old surfaces;
Weight 10.000;
Series Acryl primer LF;
A type Deep penetration;
The foundation Acrylic;
Colour Transparent;
Type of work For indoor and outdoor use;
Consumption 0.1-0.15 l / m;
Application temperature Not lower than 5 C;
Drying time 3 hours;
Appointment For priming fine-pored, highly absorbent and sandy mineral substrates;
Weight 10.000;
Colour White;
Compressive strength 5 MPa;
Flexural strength 2 MPa;
Consumption 0.2-0.25 kg / m;
Water consumption 1 l / kg;
Application temperature 5 to 30 C;
Start setting 4 minutes;
End of setting 8 minutes;
Application For sealing seams, cracks, making stucco;
Weight 10.000;
Type of work For indoor and outdoor use;
Series C-3;
Colour Transparent;
Application temperature Up to -20 C;
Consumption 0.3-0.8% of a liquid additive based on the mass of cement;
Compound Silica;
Appointment For the production of prefabricated structures based on high-strength concrete, when concreting densely reinforced structures, slabs, panels. Indispensable for the construction of monolithic structures with a complex configuration, as well as for the manufacture of reinforced concrete pipes;
Weight 5.000;
Type of work For indoor and outdoor use;
The foundation Sodium silicate;
Compound An aqueous alkaline solution of sodium silicates obtained by processing raw materials with concentrated solutions;
Appointment For gluing and bonding all kinds of building materials, for the manufacture of acid-resistant and refractory silicate masses, for fixing the foundations of various structures from groundwater, as an additive to cement mortars when waterproofing;
Consumption 0.5-1 kg / m (as glue);
Drying time 24 hours;
Density 1.4-1.5 kg / l;
Weight 3.500;
Colour White;
Compressive strength 5 MPa;
Flexural strength 2 MPa;
Consumption 0.2-0.25 kg / m;
Water consumption 1 l / kg;
Application temperature 5 to 30 C;
Start setting 4 minutes;
End of setting 8 minutes;
Application For sealing seams, cracks, making stucco;
Weight 20.000;
The foundation A piece of chalk;
Colour White;
Consumption 0.11 kg / m;
Water consumption 1 l / kg;
Appointment For whitewashing ceilings, walls and other indoor surfaces;
Weight 15.000;
Type of work For indoor and outdoor use;
Appointment It is used for the construction of monolithic, concrete, monolithic parts, prefabricated monolithic structures and monolithing joints of prefabricated structures in winter conditions at negative temperatures, as well as for building mortars;
Compound Based on sodium formate;
Application temperature Up to -30 C;
Weight 10.000;
A type Deep penetration;
The foundation Latex;
Type of work For indoor and outdoor use;
Consumption 200 g / m2;
Application temperature Not lower than 5 C;
Drying time 2 hours;
Appointment For pre-treatment of dense, poorly absorbent substrates (monolithic concrete, concrete blocks, concrete ceilings) before applying gypsum, gypsum-lime, lime-cement, etc. plasters;
Weight 10.000;
