Wood splitter for granny: science in action

Give the handyman a lever and he will move the earth, that is a fact. Yes, that the earth, with a good lever, you can do such miracles that Archimedes will envy. And so, for example, you can make it so that a grandmother of about 70 years old can easily chop wood for a bath. Actually, a good grandson will pin them himself, but the circumstances are different, so you should not give up science, especially if it is free and understandable. So, the topic of today's conversation is a wood splitter, which a person with little physical strength can use. It is not difficult to make it with a little welding skills. And the author of the YouTube channel will help to understand the structure Fodiator Ch.

Read in the article

  • 1 What, what is the wood splitter made of
  • 2 The main thing is the stability of the structure
  • 3 Parts of the rolling mechanism
  • 4 How to make a cleaver for a wood splitter
  • 5 Log splitter in action

What, what is the wood splitter made of

And then, like in a song about boys and girls - from all sorts of things. In our case, literally from scrap metal. You will need channel bars, a pair of metal pipes, an automobile spring, and a cleaver blade.

Wood splitter for granny: science in action
PHOTO: YouTube.com
The author of the homemade product used the remnants of rolled metal that he had at hand

The main thing is the stability of the structure

The log splitter will be stationary, but the structure itself, in principle, can be moved if necessary.

Its basis is a horizontal channel, to which a vertical support post is welded
PHOTO: YouTube.com
Its basis is a horizontal channel, to which a vertical support post is welded
Additionally, the rack is fixed with inclined stops, and the horizontal channel itself is also connected to two pipes that abut against the ground for stabilityPHOTO: YouTube.com
Additionally, the rack is fixed with inclined stops, and the horizontal channel itself is also connected to two pipes that abut against the ground for stability

Parts of the rolling mechanism

The principle of operation of the wood splitter consists in a movable lever with a cleaver and a weighting agent. To make it easier to operate this lever, an automobile spring is installed, which will return the heavy lever to its place.

For the spring mechanism, you need to prepare a platform from a piece of rolled metal at a height of about 60 cmPHOTO: YouTube.com
For the spring mechanism, you need to prepare a platform from a piece of rolled metal at a height of about 60 cm
To prevent the spring from jumping off, a piece of pipe is placed on the site, which will be a retainer. The pipe diameter must match the inner diameter of the springPHOTO: YouTube.com
To prevent the spring from jumping off, a piece of pipe is placed on the site, which will be a retainer. The pipe diameter must match the inner diameter of the spring
The lower platform for the spring is stationary, but the upper one, with the same retainer, must move up and down. To do this, it is mounted on a hinge.PHOTO: YouTube.com
The lower platform for the spring is stationary, but the upper one, with the same retainer, must move up and down. To do this, it is mounted on a hinge.
This is what this mount looks like, which allows you to tilt the upper platform during operation.PHOTO: YouTube.com
This is what this mount looks like, which allows you to tilt the upper platform during operation.

How to make a cleaver for a wood splitter

As a cleaver, the author used a ready-made blade from an ax.

He welded it to a long arm, which in turn fixed on the upper movable platformPHOTO: YouTube.com
He welded it to a long arm, which in turn fixed on the upper movable platform
To make the cleaver heavier and reduce the effort when working directly above the cleaver, he welded on a weighting agent - a piece of the same channelPHOTO: YouTube.com
To make the cleaver heavier and reduce the effort when working directly above the cleaver, he welded on a weighting agent - a piece of the same channel

Log splitter in action

The operation of this device is very simple and effort is really minimal.

You just need to substitute the log on a block for chopping wood and swing the lever down with a little effortPHOTO: YouTube.com
You just need to substitute the log on a block for chopping wood and swing the lever down with a little effort

Thanks to the weighting agent, the cleaver will easily split the log, and the spring will return the lever to its place. It's not like swinging an ax at all. And what is convenient - you do not need to run back and forth, substituting logs, as in most home-made wood splitters. You can operate this device while standing or even sitting, just having a bunch of uncut chocks on hand.

The whole structure takes up little space, it can easily fit next to a woodpile, and its weight, although considerable, still allows, if necessary, rearrange the device to the place you needPHOTO: YouTube.com
The whole structure takes up little space, it can easily fit next to a woodpile, and its weight, although considerable, still allows, if necessary, rearrange the device to the place you need

The wood splitter can be operated by a person with little physical training, the work is safe and simple.

There are other modifications of such devices, which are also quite efficient. For example, here is a mechanism that works on a completely different principle:

This design is more complex, but does not require any effort on the part of the operator at all.

Have you met something similar or, perhaps, used such devices? Maybe you know more effective models and are ready to share your experience? Write about it in the comments!

Discuss0