Water in the country is necessary - this is a fact that no one doubts. Of course, the ideal option here is your own well in the yard. The problem is that not everyone is planning to enter water (even from their own well) into the house. After all, these are unnecessary costs - both financially and physically, and in time. So, a good solution would be to install a water intake above the well in the yard. And how to make it so that the pipes do not freeze in winter, knows one of the authors of YouTube-channel.
Read in the article
- 1 The main problems of street water intake
- 2 What is needed for the installation of an anti-freeze water intake
- 3 Where to start work on the arrangement of water intake
- 4 How to organize the water supply
- 5 Water supply pipe connection and some improvements
- 6 Water intake site equipment
- 7 Returning to the well
- 8 Using the water intake in winter
- 9 Summing up
The main problems of street water intake
It would probably be superfluous to explain in detail the effect of low temperatures on water mains. After all, the usual, at first glance, freezing of the pipe is fraught with big problems. Frozen water can rupture steel and even cast iron lines like the thinnest foil.
Those who live year-round in private territory know what insufficient insulation and improper installation of highways leads to water supply for the winter. Therefore, in severe frosts, many do not completely turn off the taps so that the water can flow at least in a thin stream. But today we will talk about the water intake, located in the local area or in the garden, which will not freeze even in the most severe frosts.
What is needed for the installation of an anti-freeze water intake
For today's example, we will use a variant of water distribution in a well. Thorough insulation is not required here because of its depth. But if you bring the pipe to the surface, problems will arise in frosts.
For today's work you will need:
- a piece of pipe (½ inch, thin-walled is better), slightly longer than the depth of the well;
- a piece of thick pipe into which a half-inch will enter (slightly more than the thickness of the wall of the rings wells);
- plastic water pipe, corners, three-way and two-way ball valve;
- welding machine on plastic;
- Bulgarian, pliers;
- trimming fittings for mounting a tragus for water intake.
Where to start work on the arrangement of water intake
First you need to make an extension for the handle of a three-way ball valve. For this, a T-shaped incision is made at the edge of the pipe. The photo below clearly shows how it should look.
Further, the "ears" are unbent outward, and a hole for the bolt is drilled into them. It is he who will hold the extension cord on the handle, preventing it from jumping out.
How to organize the water supply
The water supply from the well should be carried out through a three-way valve.
The task is to assemble the following scheme:
- the first position of the handle - the water supply is completely shut off;
- second position - water is supplied to the top;
- third - the supply is shut off, while the water remaining in the pipe easily flows out of the free tap hole into the well.
If you understand the essence, everything becomes extremely simple.
But before attaching the plastic pipe, it is necessary to complete the extension for the three-way valve.
Water supply pipe connection and some improvements
Now you need to attach the plastic pipe to the three-way valve and bring it up. At its end, it is also necessary to mount shut-off valves. The holes are covered with cement mortar. In this case, the extension pipe is pushed into a section of a thicker pipe. This way, the solidified solution will not prevent the extension cord from rotating freely.
Water intake site equipment
It is clear that there will be constant dampness at the water intake site, which means that it is worth taking care of the formation of a site with a small elevation. A good option here would be to lay a couple of squares of paving slabs.
In order for the outside crane to stand firmly, a stand must be made under it. The easiest way is to use ordinary trimmings for these purposes. fittingsby welding them together.
Returning to the well
Let's take a look at how the system works again. If distributed by seasons, then in the warm season the water supply and its direction to the upper tap will always be open. In winter, this position will be appropriate only when it is necessary to pour water. To preserve the water intake, the position of the handle of the three-way valve must ensure complete shutoff of the supply when the drain and outlet to the upper valve are connected in the open position. Thus, the water remaining in the pipe will simply merge into the well, there will be nothing to defrost in the line.
Using the water intake in winter
In the cold season, the upper ball valve does not work - it is always open. Water will be turned on only with an extension cord. After filling up the water, the extension turns to the drain position.
Summing up
It is clear that it is better when the water is brought inside the house. However, in the country, this is not always convenient, and sometimes completely inappropriate. Therefore, the rules for the device of non-freezing water intake need to be known to every home craftsman. Even if the owner does not want to do all the work himself, having this knowledge, you can make sure that the hired workers do everything correctly.
We really hope that the dear reader was not bored with reading today's article. Homius editors will be happy to answer any questions on the topic, if they suddenly appear. You only need to summarize them in the discussions below. There you can also share your opinion on the importance of water intake in a summer cottage, or comment on what you read. And further. Don't forget about grades. Your feedback is very important to us. Take care of yourself, your loved ones and be healthy!
