A fence made of brick and corrugated board: a photo of a beautiful design with brick pillars

A fence made of brick and corrugated board, combines two of the most popular materials in construction. Combined fencing is a structure consisting of two pillars with brickwork, on a reinforced foundation, between which a profiled sheet is reinforced. Such a fence fits well into the design of any site, regardless of what the house, country cottage or summer cottage is built of.

A strong and reliable fence, harmoniously blending into the surrounding landscape, is the best indicator of the taste of the owners of the house

Reasons for the popularity of brick and corrugated fences

The combined hedge is, first of all, practical, it will reliably hide the area from prying eyes, prevent the intrusion of intruders.

Brick provides structural strength and additionally serves as a decorative role

The profiled sheet creates a continuous fence that reliably covers the area from prying eyes

What other advantages does it have:

1. Material benefit - a fence, built entirely of brick on 7 acres, will cost as much as a small house. It is much more economical to build a fence from a profiled sheet with brick pillars.
2. The design possibilities are endless, you can paint semi-antique, under a tree, apply any pattern to the surface, and also combine with the architecture of the house and the landscape of the site.
3. Resistance to temperatures - brick and galvanized profiled sheets withstand both low and high temperatures well.
4. Possibility to make masonry for pillars and order corrugated sheeting of any height from the manufacturer.
5. Fast installation - maximum two weeks, excluding weekends.
6. Easy care.

To these advantages, you can add good noise insulation, protection from wind, snow and dust, fire safety. The combination of profiled sheet and brick panels, installed on a solid foundation, will last up to 50 years, it is environmentally friendly, looks solid and presentable.

Fence device made of profiled sheet with brick pillars on a concrete base

Examples of beautiful fence designs

Design options may be different. The main thing is to lay a solid, solid strip foundation on which a brick fence with corrugated board will serve for many years without deformation.

The service life of the combined fence is determined by the quality of the foundation

4 main types of structures:

• The columns inside are filled with reinforcement, filled with concrete mixture. They are laid out in 1.5-2 bricks from the front and back and in 1 from the sides. For a longer service life and aesthetic appearance, decorative metal, concrete caps or lighting elements are installed on the surface of the posts.

• The lower part of the fence is made of brickwork or monolithic concrete; this option looks much more beautiful than installing a profiled panel to the entire height of the fence.

• Installation of a profiled sheet, when it completely covers the supports, does not look very good, it is much more aesthetically pleasing when mounted on poles. A prerequisite is that its length should not exceed 3 meters.

• The metal profile can be installed in two ways, in a vertical and horizontal position. You should choose a metal thickness of 0.5 mm.

Decorating and styling options

Various colors, configuration of the metal profile (different depths and wavelengths), a large assortment of paints and varnishes allows you to realize any of the most daring ideas.

Modern technologies make it possible to decorate the profiled sheet with a variety of decorative coatings, for example, imitation of natural stone

Painting under a tree

Fences for wood made of corrugated board with brick posts completely imitate the structure of different types of wood, look expensive and natural. Only up close can you see the difference, from a long distance it cannot be distinguished from a wooden one. The most popular shades are: wenge, golden and dark oak, pine, white wood (acacia). They can be matte or glossy.

Imitation wood makes the fence more beautiful, but it costs a little more.

When self-coloring the profiled sheet, it is better to use the powder method, this method makes it possible to achieve different relief and gloss intensity. There is no solvent in the applied powder, it consists of micro-particles of rubber and pigment. The best European paint manufacturers: France, Italy, Germany.

An inexpensive way to paint profile panels yourself is by airless spraying of paints and varnishes. The method is cheap due to the absence of paint fog (no waste) and high productivity.

Cladding

Decorating pillars is an opportunity to show imagination, taste and skill of a decorator. You can use ordinary white brick, which goes well with the dark shades of the metal profile, or use red, which is affordable and cheap in price. A good master will lay out the masonry in a checkerboard pattern, in the form of a spiral of two colors. Supports made of figured and embossed bricks look unusually beautiful.

A beautiful fence with spiral pillars lined with decorative bricks

Facing with decorative plaster is a cheap method, which consists in adding elements that form the structure to the solution. Such types are known:

• Bark beetle and rain - differ only in the method of application, the surface takes on the appearance of tree bark a sharpened beetle of the same name, is resistant to high and low temperatures and ultraviolet rays.
• A fur coat is a well-known economy option that will last for many years.
• Granules - rough structure tolerates temperature extremes, atmospheric precipitation, water-repellent with excellent adhesion.
• Marble chips are an ideal coating that has all the necessary qualities for a long service life and a beautiful appearance.

Natural stone is a solid finish, it will add massiveness and reliability. There are unedged, sawn, hewn, each of them looks impressive.

Combined finish: natural stone below, decorative plaster on top

When decorating columns with clinker tiles, the fence will look much more elegant, it will acquire a noble, refined look. This material does not fade, repels water, frost resistance. One drawback is the rather high cost.

Artificial stone is much lighter and more budgetary than natural stone, it has a wide range of colors. Having covered not only the supports for the profiled sheet with light decorative material, but also the house itself, having accordingly decorated the landscape, you will get an extraordinary, fabulous sight.

The photo shows an example of decorating fence posts with artificial stone

Venetian plaster creates the appearance of natural marble, is not afraid of atmospheric precipitation, fireproof. Looks harmoniously with the pattern on the profiled sheet.

Drawing a picture

The variety of profiled sheets with photo prints is amazing. On the market there are bright colors, realistic, fabulous, phantasmagoric plots, 3D visual effects. You can even hire an artist who will decorate the fence in the best possible way, but this pleasure is not cheap.

A talented artist or designer is able to create an incredible masterpiece that will make the fence stand out from the gray mass.

How to paint the fence on your own so that it sparkles with all the colors, pleases the eyes of households, passers-by? There are four ways in total:

• Airbrushing - for people who know the art of painting from a spray can, the process will be fun and will not take much time. Non-professionals are better off not taking up this occupation. Such a fence turns out to be original, super-fashionable, voluminous, it is difficult not to pay attention to it.
• Stencil - everything is simpler here. A template is made on its own or purchased in a store. It is fixed on the corrugated surface with tape, then paint is applied with a roller, brush, sponge. The picture looks harmonious if the background of the metal profile is combined with the pattern.
• A sketch is created before application, all details are drawn, determined with a color scheme. Geometric shapes, thematic paintings, landscapes can be depicted in this way.
• Tagging is a new direction in art, drawing is done with a special tool, a vandalizer. In fact, this is a regular marker with a wide nib (up to 10 cm).

Alkyd, water-repellent acrylic paints, oil enamels, spray cans, varnishes are used. They paint each section with different pictures or make up a general composition for the entire fence.

The composition with a perspective looks interesting, visually increasing the area of ​​the suburban area

Photos of examples of beautiful fences

Well-chosen colors create a solid structure. Dark profiled sheet, light columns are timeless classics.

Contrasting combination of brown profiled sheet with facing brick of a light shade

A beautiful, rich fence with a wrought openwork semicircle, which is welded to each section of the corrugated board. The caps are on supports, the roof of the house is painted with the same paint.

Forging radically transforms the appearance of the fence, however, it also raises the cost

An interesting project - the house and the pillars are lined with tiles of the same color, and the metal profile goes well with the roof.

The selection of a profiled sheet to match the color of the roofing is the most popular solution among owners of private houses.

The pillars, lined with natural stone with gaps, give a solid, but at the same time elegant look in combination with a wood fence.

A harmonious combination of stone and wood on a solid fence of a suburban area

The fence with supports, lined with multi-colored tiles, looks attractive, when one of the colors repeats the color of the corrugated board.

The combination of light and dark tones creates a unique and original decor

Whatever the cost of the combined fence, the main thing is that it is combined with the building, in line with the landscape design. Only in this case it will harmoniously fit into the overall picture, become a highlight, the face of a mansion or a small house in the village.

Video: Construction of a fence made of profiled sheet and brick

Photos of beautiful fences