Cooler water table without heating: floor without cooling, a review of the models, the rating

Water Coolers without heating and cooling installed in the educational and health facilities, shops and homes. The devices are easy to use, mobile and easy to move, disassembled, repaired, inexpensive.

Kinds and features for water coolers without heating and cooling

Cooler without heating and cooling provides the user with water at room temperature. Their design is simple: the top of the bottle is located, in the middle - the lever, through which water is pumped. The liquid is poured into a plastic beaker from the bottle by pressing the crane. The devices are mainly applied 19-liter bottles. The coolers there is no heating system, therefore cheaper devices analogs which can be heated or cooled water.

Voodorazdatchiki are available in a wide range. Any buyer can choose the model as desired:

• table or floor;
• shape;
• to size;
• the arrangement of the bottle;
• design.

Cooler water table without heating - a simple design, which cools but does not heat the water. Table cooler without heating can be put on the windowsill, a stand, a stand or other surface.

Outdoor cooler without cooling - unit rather massive. It placed a large amount of capacity. Loading bottles may be top or bottom. If the bottle is set at the top, the water supplied to the dispensing tap. In units with the placement of the container in the lower part has a telescopic shelf under the bottle.

Important! For places where there are only women, it is better to purchase a cooler with lower deployment capacity. Supply bottle with a volume of 19 liters - consuming process.

There are machines for bottled water and the devices that connect to the water system. There are models with additional features in the form of a refrigerator, which is located at the bottom of the device, ozonation, carbonation, child protection. Some devices have a locker for placing dishes, which is Ozonator that all items are clean and disinfected.

Advantages coolers without heating and cooling and their drawbacks

Household Water distributors have many advantages:

• the device is easy to carry and set up anywhere in the room;
• no need to connect to the electricity grid, which provides electrical safety in kindergartens, school institutions, health care facilities;
• easy to use, can use even a small child;
• low cost, when compared to the coolers, heating and cooling water.

Having two taps - one more plus: In case of breakage of one, you can use another.

The disadvantages are the lack of heating and cooling. But not all people want to drink iced water, especially for children. A heat water for tea or coffee can be the electric kettle that is on any kitchen.

How to choose a cooler - what criteria

To choose the best cooler without heating and cooling, pay attention to the dimensions of the device. If you allow the area of ​​the premises, get the floor model. If the room is small, it is better to buy a desktop device, which not only takes up little space, but if necessary it can be easily removed or rearranged.

Pay attention to the material of manufacture of the unit housing. Manufacturers produce devices of different materials (plastic, ceramic, etc.), So when choosing a take into account the conditions in which the device is operated, whether to handle it with caution.

It is also important to know when choosing how you are important additional options. If the unit has a freezer and a safe, the cooler will cost more.

Before buying obsmotrite full product for chips and cracks. Check the device to the smell - some devices may reek material from which they are made. It is better to immediately abandon the vehicle with the smell than to drink water that smelled of synthetics.

Which is better: floor or table

If there was a question about what is best Water distributors - floor or table, the unequivocal answer you will not find. Both varieties have about the same working principle. outdoor unit more cumbersome, and if you need a tool for the institution or office where there is a large number of people, this option is acceptable. 19-liter apparatus equipped with two taps which open when pressed glass.

Desktop models also counted at 19 l. Devices are more elegant and beautiful design. used high quality ceramics for the production of desktop coolers. Often included with the device is a special stand made of wood - a convenient and stylish. Most model is suitable for the home.

Popular brands and models

Water coolers in which no heating and cooling, are in constant demand in the population. In their reviews a rating models, suiting most people ease of use, appearance, dimensions.

Popular brands and models:

1. Aqua Work Y-MMJ. Desktop model has one tap. Dimensions - 29h29h32 see. installation capacity in the upper part. It delivers water at room temperature.
2. Aqua Work 36-TWN. Table apparatus without cooling and heating with two taps. Dimensions of the unit - see 31h29h435. loading the bottle top.
3. Aqua Work 0.7-LW / B. The floor unit is not heated and cooled liquid. It has a lower load capacity. Dimensions of the device - 32h30h86 see. There are two cock.
4. Aqua Work 0.7LWR. Floor model, the feed water at room temperature. Setting container top. Water is supplied by pressing a button. There are two cranes. Dimensions - 30h29h855 see.
5. Aqua Work 105LWR. Outdoor unit supplies water having a room temperature. Location of the bottle top. The water supply is carried out by pressing glass on a crane. The device two cranes, cup holders, which are mounted on screws or magnets. There locker for placing dishes volume of 9.5 liters. Dimensions - 33h36h100 see.
6. Aqua Work 16-LW / HLN. Floor model has no heating or cooling system. The bottle is in the upper part. The phone two cranes. There are cup holder attached to the magnets or screws. The size of the unit - see 31h31h960.
7. Aqua Work 0.7-TW. Desktop model made with the installation of the top. No heating and cooling. Unit with two taps. water is supplied via a button. The size of the cooler 28h30h40 see.
8. Aqua Work 36-TWN. Table unit with two taps. Fed water which is at room temperature. The bottle is located at the top. Device Size - 32,5h32h44 cm.
9. Aqua Work 0.7-LW. Outdoor unit equipped with 2 taps. Setting the upper tank. There is a holder for glass, which is fixed with screws or magnets. Downstairs there is a cabinet whose volume is 10 l., Where you can store utensils. The water is not heated or cooled. Dimensions of the unit - see 30h29h860.
10. Aqua Work 16LW / HLN. Floor unit with loading bottles into top. There are two tap, through which can be poured into water at room temperature. Includes cup holder attached magnets or bolted with screws. Dimensions outdoor cooler 31h31-960 see.

There are many models that may be of interest in the selection. The main thing is that they meet the requirements and fit to the interior space.

Rules of operation of the coolers without heating and cooling

Specific requirements for the operation of Water distributors does not exist. But some rules still there. Handle the device should be cautious. If, for example, a desktop unit to fall from a height, then, most likely, will become worthless, require either repair or replace the other device.

Once a month is recommended to carry out an independent cleaning device. If it is a replacement tank to the other, the receiver with a needle to clean carefully, because at the location of the bottle most active bacteria multiply. Def bottles (labels, polymer bags, rings) required during transportation, should be removed completely.

Brushing your own cooler should be wearing gloves. For purification required soft cloth, brush, an agent which is used in dishwashing, water tank. The cleaning solution can be prepared from 100 g of citric acid, diluted in 5 liters. water.

Purification is to remove empty bottles, drain the remaining water through valveLocated on the bottom or back of the device. Next, remove the parts that can be removed. device taps into hard to reach places clean a brush and dishwashing detergent. Removed and washed with drip tray tray. Butylepriemnik twisting, it is poured into a prepared solution and left for 5-6 hours. The solution was then drained and washed with pure water all.

Housing Water distributors wiped with a clean cloth moistened with a cleaning solution. Especially carefully wiped the back of the appliance, as it was there that accumulates the most dirt. At the end of the housing is wiped with a dry cloth, and set the bottle filled with clean water in butylepriemnik cooler.

results

The presence of the water cooler without cooling and heating your home or provide employees with clean drinking some water. The main thing is to choose the right model of the cooler on the size, design and other parameters. It is also important to ensure the correct operation of the machine and the proper care.