In any, even a very neat housewife, the kitchen is often found little trouble in the form of burnt pan. To part with your favorite utensils, each time it will burn is not reasonable, knowing the little tricks - to clean the pan from the burn-just enough.
Sometimes the dishes loses beauty and brilliance as a result of long-term operation.
Content
- 1 Causes of soot on the walls and bottom of the pot
- 2 Properties cleaning pots of different materials
- 3 Cleaning pots of different materials
- 4 The best home remedies for removing the varnish with different dishes
- 5 How to clean burnt pot of different kinds of pollution
- 5.1 Types of dirt on the dishes
- 6 Traditional methods of cleaning dishes in the household
- 7 How to clean heavily burnt pan chemical means
- 7.1 Chemical means to remove carbon deposits
- 8 Precautions during the cleaning process
- 9 Tips for proper cleaning without damage to dishes
- 10 VIDEO: How to effectively clean the pan from the deposit.
Causes of soot on the walls and bottom of the pot
If we exclude the most common cause of burned pots - is leaving cooking dinner on the stove unattended, and the water just boiled away and the food was burnt. Another important factor is the quality of the dishes and its correct use. Yellow plaque and scale from hard water, and when the cover is painted in a different color from the bright berries, fruits and vegetables.
utensils for daily care implies quality cleaning.
Properties cleaning pots of different materials
- Aluminum. The material does not tolerate acidic foods that react with aluminum and on the bottom and walls of the dark spots are formed, from which escape is almost impossible. Aluminum - a very soft alloy, which in mechanical cleaning easily leave scratches. It threatens you spoiled dish unsafe for health. In such a saucepan is better to cook soups.
- Enamel. Brittle material, which at the slightest fall easily give a crack and chip, so the dishes can not be used for cooking. But with careful handling enamel is easily washed, even when heavily burnt food.
- Teflon. Utensils made of this material practically does not stick. Non-stick coating allows not only to cook food without oil and metal penetration, but also quickly wash the pot without much hassle. But the material is prone to scratching, when they appear, the pot is better to throw out.
- Stainless steel. The material is easily cleaned from burnt food, but on the surface during cooking are formed of blue-green stains, which are very difficult to dispose. Stainless steel does not suffer from the coarse fraction abrasives.
- Ceramics. The bottom of the pots of ceramics coated with glaze, which ceases to bear abrasion function of the non-stick coating, and the food begins to burn, during cleaning not use metal sponge.
After completion of the cooking process, the dishes must be rinsed in sufficient water using detergent.
Cleaning pots of different materials
Many housewives are wondering how to wash the Burnt pan, it is worth noting that this is not a tragedy, but quite ordinary and resolve issues.
Baked-wash the dishes, remove from its surface deposits, fat spots under the force of any owner.
Each saucepan your approach if your kitchen pots variety of different materials, it is necessary to know what is suitable and perfectly cleanse one dish, it can be disastrous for another.
The best home remedies for removing the varnish with different dishes
- How to wash the baked-enamel pot.
If the bottom is much burnt, it is necessary to soak the pot for a few hours with dishwashing liquid and remove carbon deposits a large wooden spatula. To remove residual slurry can be made from soda, citric acid and vinegar 30 grams and scrub, the same effect has the coffee grounds, after cleaning the wash water. This natural abrasives, which are all at home, and will not damage the enamel coating. Often pan in yellow or dark, this plaque from the enamel perfectly laundered using lemon juice, vinegar or whey from milk, enough to soak the pan overnight solution, and the enamel will again be white.
Enamel pot is not necessary to immediately fill with cold water, it is necessary to cool down the pan, or under the influence of cold water can damage the enamel.
- Subtleties of removing carbon from the pan-stainless steel.
Stainless steel is very easy to care for material that is easy to clean. The main thing when cleaning do not use rigid metal sponges, they scratch the outer layer, which fades with time. Universal remedy for all types of dishes that perfectly cleans stainless steel pan - this is the paste of baking soda and PVA glue. In a large saucepan for 10 liters of diluted ½ pack of soda and 100 grams. glue. Bring to the boil and the solution was omitted in all the vessels alternately, which needs to be purified, boil 5-10 minutes, pull out and washed with plenty of water, remove the complex burnt sponge for washing dishes. This tool is great for removing carbon deposits inside and outside the pan.
Some housewives are added salt in cold water, but there are times that dark spots on stainless pan may occur after this addition salts, which are not removed.
- How to clean aluminum pan from burning.
When a slight darkening at the bottom will help apple or whey. Enough finely chopped apple Add water and boil for five minutes, stewed in a pot or whey - it will allow you to clean the dishes, and she will once again shine. Complex fumes remove ammonia and hydrogen peroxide: One liter of water was added 50 ml of these components and boiled for 30 minutes, then wash with enough residues burning utensils water.
Burnt food should fall behind the walls and bottom of the pan.
- Nuances cleaning ceramic pan.
Pottery can not tolerate acidic and alkaline environment, so to clean must be treated with caution. The best remedy for removing metal penetration - this is a common neutral detergent dissolved in hot water, let stand for about an hour and a solution of leftover food themselves depart from the walls and wash off the flow water.
Pan easily be washed with any detergent means a dish.
- How to remove burn-Teflon pans.
Pre stubborn dirt places should be soaked with warm water for half an hour. The optimal means for cleaning the coating of Teflon is mustard powder: 2-3 spoons add a little water to form a slurry, and you can easily wipe burn-residues from the pan.
Wash the pan in the traditional way - the food residue is easy to remove.
How to clean burnt pot of different kinds of pollution
We all housewives sooner or later the question arises as to clean the burnt at the bottom of the pot, much depends on the products that are burnt. The worst thing - is to burn rice product firmly take a strong liking to any surface, but it is fixable.
Metals react differently to the cleaners.
Types of dirt on the dishes
- Porridge with milk. Soak contamination with warm water and detergent for a few hours and high clean fouling. On the wet bottom saucepan, pour two tablespoons of baking soda and add a spoonful of vinegar on top, wait, when will the chemical reaction. This composition can be applied on any surface other than aluminum. Aluminum pot is better to boil with a strong salt solution.
- Fig. Perfect citric acid aqueous solution, and make it boil for 15 minutes, leave for the night, in the morning you easily remove any food residues from the bottom.
- Jam. Do not soak the dishes in cold water, better to boil a pan with an aqueous solution of soda, citric acid or vinegar, sugar dissolve and wash off easily.
Before you get to work, determine what material is made by your pan.
Traditional methods of cleaning dishes in the household
This time-tested tools that are not inferior in its chemical composition and effectiveness are more accessible and safe for our health.
- How to get rid of the burning of food residues and baking soda.
Soda is an excellent abrasive, which does not damage even the most delicate coating. Usually it is always a home and it is possible to put a little on a damp sponge and scrub burnt food residues. With soda can be polished stainless steel cookware and return it to its former glory.
If affected not only the bottom of the pan, but its outer surface, a good way to get rid of the burnt products is most boiling pots in soda solution.
- How to remove metal penetration through salt.
Salt, especially coarse, not used as an abrasive. Make the solution: per liter of water five tablespoons of salt is poured into a pan and left to stand for several hours until complete dissolution, then the solution is brought to a boil over low heat and allowed to cool. This allows you to quickly clean up soot with any dishes.
- How to scrub soot and residues of food vinegar.
Due to the acidic environment, vinegar copes with soot. Enough to soak the bottom of the pan vinegar for a few hours, then boil for 5 minutes, and all the food debris will be cleared without a trace. Do not use vinegar for cleaning utensils made of aluminum - will appear on the cover of dark spots, which can not be inferred, the pot should be thrown out.
Especially vinegar is good for aluminum pans.
- How to clean the pan with a mixture of soda and peroxide.
Perfect for cleaning all surfaces: 3-4 spoons of peroxide mix with 5-6 tablespoons of baking soda and rub with a soft sponge. This composition can be washed both internal and external surface of the cookware.
- We use soap.
Reliable means, familiar to us from the Soviet era. Slice soap Grate and dissolved in water: a one liter 5 tablespoons chips. Fill in a pan and bring to a boil, cooling to give stand - that will be enough to burn-rinse with water.
This method is effective if the burn-tracks are not very pronounced, ie at low burning.
- Apply charcoal.
A mild cleaning agent that is suitable for delicate Teflon coatings. 10 tablets are dissolved coal in a small amount of water to form a slurry and rub contamination complex for 1-2 hours, then remove the food residues soft sponge.
- Shoe using whey.
Unique bacteria that are found in the serum, it is safe to soften any burn-pot. If necessary, it can be boiled in a pot, for the best effect.
This simple product can help get rid of the burn-in an enamel pot, aluminum and stainless pan.
- A solution of PVAc and soaps.
In this part of the dishes are boiled to remove carbon deposits from the entire surface. The shaving soap 5-7 spoons, 100 gr. adhesive diluted in 2 liters of water and heated. When the mixture boiled, allowed to pan for 1-2 hours and washed with water.
- A mixture of soda and salt.
Fine salt and soda, excellent abrasives that can be used to clean dishes every day. If dissolved in a liter of water, these components 5 tablespoons and heat over a fire in a saucepan, then the result will not take long, after cooling all be washed.
To pan made of stainless steel this method should be used with caution: a high probability of occurrence of dark spots on the salt.
How to clean heavily burnt pan chemical means
Chemicals to clean the dishes well and efficiently, but it is worth remembering what to buy should be only those compounds that are suitable for your type of pan.
If you do not want to wait long to boil, then just buy a means for removing burnt and stubborn fat.
If your kitchen is expensive and favorite dishes, buy chemicals in the tried and trusted stores.
Before applying them need to read the instructions and make sure that it is a means for cleaning this type of pan.
Chemical industry in recent years has made great progress, and you can easily select the part that will clean the dishes and do not hurt her.
Chemical means to remove carbon deposits
- Schoeman. A specially designed tool to remove carbon deposits from any surface that is enough to put on the problem areas and a little rub.
- Mole. The means by which we clean the pipe. Before application to the surface it has to be diluted with water 1/1, applied for 10 minutes and rub the contaminated sites.
- Bleach. It can be boiled, which gives us the ability to easily get rid of a deposit not only inside, but also outside of dishes.
Tool for cleaning pipes help to cope with contamination on the pan.
The main thing, after applying all cleaning products, dishes must be washed cleanser and rinse with plenty of water.
To clean stainless steel products suitable acidic liquid intended for cleaning of various kitchen surfaces.
If you have a dishwasher in the kitchen should, it is unlikely you will wash the pan of a deposit in the dishwasher. It is designed for daily cleaning and removal of fatty plaque, it would be better to get rid of burnt food by hand.
Stainless steel pans are not recommended to be cleaned with abrasive materials or metal scrapers, which could scratch the surface.
Precautions during the cleaning process
If you do not allow the use of traditional methods of cleaning, chemical compositions must be treated with extreme caution. Mandatory use of rubber gloves in the process, and for the application of funds is better to use a special brush.
No one is safe from annoying oversights that occur during cooking.
When boiling bleach, you need to open windows and create maximum vapor hood in the kitchen, then your health will suffer.
Stains on Stainless steel cookware may occur after its first application, and also in connection with the use of lime water
Tips for proper cleaning without damage to dishes
Adhering to the manufacturer's recommendations on the care of the dishes, and a few tips your saucepan experts will serve you for years to come.
It should be remembered that the use of compositions having a complex chemical formula, requires mandatory use of gloves and follow precautions.
- Buy pans with non-stick coating, which will save you from a long work on cleaning.
- If there was a nuisance and a pan to overheat, do not leave it for a long time. It is better to scrape the contents and immediately soak with water and detergent, then further cleaning will be easier and more efficient.
- It is better to use traditional methods of cleaning, they are safer and just as effective.
Cleaning pots preferably carried out in a well ventilated area.
Any trouble in the kitchen, fixable important to know how to deal with it. And then your dishes will long to please you with its purity and your loved ones a delicious dinner.