As clean aluminum pan of a deposit at home: how to wash the bottom of aluminum dishes burnt

The aluminum pan is heated faster due to ease of metal, from which it is made. That's what its like to use as a housewife and cook. In addition, this cookware is different inexpensive cost. However, soot is formed, which is literally "eats" in the pot for long term use.

Features of operation of aluminum pans

When using this type of pans should be accurate. The material does not withstand high temperatures, so the microwave oven and it is better not to use, otherwise the deformation, and harmful substances penetrate into food. Especially harmful to prepare products with a high concentration as pH Aluminum reacts. This container is not suitable for the manufacture of baking, stewing meat. Also, due to the chemical reaction of the metal should not be stored for a long time in her food. But to boil water, cook compotes and soups it is very convenient and fast.

Types of contamination pans inside and outside

scum

It occurs on the surface of the dish, if the water in the house is hard. Scaling phenomenon is by no means harmless. It not only slows the heating of water, but also leads to health problems (suffering kidney and urinary system). Trying to scrub the scum, you risk damaging the surface of the pan. To clear the dishes from the scale it is desirable to boil it with a solution of baking soda or vinegar rinse.

Fat

It remains in the pan after cooking fatty foods. If timely and qualitatively not wash container of fat, it will lose the former luster, formed scratches and stains. A damaged aluminum hazardous to health, in view of the risk of chemical reaction with the food. To clean the pan of fat it should be soaked for 30-60 minutes in warm water with detergent.

burnt food

If cooking cook hesitated, and the food had time to burn on, then wash it easy sponge traffic will not be easy. Better water boil it with a solution of baking soda and then washed in warm water.

Nagar on burnt pot

Stubborn traces of soot and fat are converted to carbon deposits. Nagar is formed not only if the hostess forgot to turn off the stove in time. Fat foods during cooking fall onto the outer walls of pots and soak in it. Coke layer is increased each time and the more difficult to get rid of it. Especially when it comes to containers of aluminum. Spoils the appearance of the packaging: it turns black and looks disgusting. Nagar is as dangerous to health, as well as other kinds of pollution and to cope not just with him. For these reasons, a housewife so often wonder: how to clean aluminum pan of a deposit?

How to clean aluminum pan of a deposit at home

If you overheat the aluminum pan, you need to know how to clean it, using all possible means. It all depends on the degree of contamination, the time that you can spend on cleaning, as well as the characteristics of the most pots.

If the pan has stainless cover - to take care of its preservation need most carefully. Food cooked in a stainless container, long retains its useful properties. This coating does not react with the products and substances, and thus preserves the health of those who use aluminum cookware. Aggressive cleaning methods can destroy the coating and leave scratches and damage due pan which loses its protective properties.

Household chemicals

There are ready means by which it is possible to clean burnt pot. They are sold in any store specializing in household products. Selection of detergents is enormous, but they include alkalis and acids which are bad for a fragile and susceptible to changes in the metal, such as aluminum. When working with such means should be put on the gloves, and the room is well ventilated.

Improvised methods and tools

To clean the soot suitable means available. Many of the household may be useful: vinegar, alcohol, acid, soda, salt, tooth powder.

You can get rid of the soot using incandescent at the plate. A couple of hours the pot is heated, and then removed all superfluous. The room is well ventilated. It should be done carefully to the soft metal is not deformed.

To clean the bottom of the dish is often used vinegar, citric acid and soda. As there is a method to help cleanse both the inner and outer sides of the pan.

How to clean baked-pan citric acid

1. Boil small amount of water.
2. Add 2 tablespoons of citric acid.
3. Boil the solution for 15-20 minutes.
4. Scrape off soot on his tender.
5. Rinse the pan under warm water.

How to clean the pan using vinegar

Vinegar is an effective, but not suitable for enameled surfaces.

1. The bottom pan is filled with 9% vinegar solution for 2-3 hours.
2. Nagar scraped as softening.
3. Pan rinsed under warm water.

we use salt

Salt is one of the best means for cleaning aluminum containers. It perfectly absorbs grease and cleans metal penetration. Also suitable for enamel surfaces.

1. Absorb salt of the bottom pan and add a couple of drops of water or detergent.
2. Rub the resulting composition of paper towels or towel.
3. Rinse the pan under warm water.

Shoe with soda

This method is not suitable for aluminum cookware without enamel or non-stick coating!

1. Dilute the solution of water and soda 1: 1. Water pour a little to make it just flooded the floor.
2. Bring the solution to a boil.
3. Remove from heat and let stand for 15-20 minutes.
4. Scrape off softened a deposit.
5. Rinse the pan under warm water.

How to wash the dishes with PVA glue

If you want to get rid of dirt inside.

1. Mark 2 tablespoons glue and grated 2 tablespoons soap.
2. Dilute these ingredients in the water.
3. Boil for 30-40 minutes with the lid closed and then remove fouling residues sponge

If you want to clean the pot of black on the outside is necessary to use a larger container.

1. The container pour polstakana PVAc and pour grated 1 piece of soap.
2. Pour the water and put on fire.
3. Gradually stir, wait until the dissolution of the soap and place in a bowl to be cleaned solution.
4. Boil for one hour, covered with a container lid.
5. Remove the aluminum product and clean it with a sponge.

Purification of activated charcoal

This tool is used to clean the pan with the outer and inner sides.

1. Comminuted into powder coal tablets are mixed with water to a state of slurry.
2. Gruel treated pollution and leave for at least 30 minutes.
3. A mixture of soot and removed with warm water and detergent.

Properties cleaning heavily burnt pans

If the pan is much burnt to use the combined method is better. Those. combine several of the above tips. And use them after some time. Will effectively combine cookery soda and PVA glue. A treatment time increased from 3 hours to 5.

How to bring back former splendor of the aluminum pan

Not only wash the pan, it is also necessary to give the former splendor and attractive appearance.

This will require a large container in which you can put the pot and toothpaste. Toothpaste contains aluminum dioxide which is extremely mild abrasive. Therefore, the alloy acquires the original gloss. You simply boiled in a pot with toothpaste solution for 10 minutes.

Also, the cream of tartar is suitable for a gloss. This burgundy-red crystal, resulting in the production of wine. It has properties that help restore luster aluminum.

How to select a suitable method for cleaning

The choice of method depends on the degree of contamination, the age of the pan and its volume. Choosing the most effective, but less gentle method, you risk to spoil the dish. Perhaps you could do at the blood.

Note - outside, inside or both sides to be cleaned.

How much time to the surface from burning? How long pot had been in such a state? After evaluating all the factors, select the appropriate method. Thus sparing agent is activated carbon. The last should be resorted to household chemicals.

What tools should not be used

Aluminum is very fastidious metal, it is easy to damage and ruin. To avoid this, you should know a number of taboos, and never use the funds listed below.

• Metal sponges and brushes that can ruin the surface.
• Scouring powder, leaving scratches.
• Dishwasher. High temperature deformation facing pots.
• Sand, chalk, sandpaper and other harsh methods of dealing with the burnt dishes

utensils for Care and burning prevention education

Once the pan is cleared, it is necessary to keep it in such a long time. It is better to prevent the emergence of a deposit than to fight with him aggressive methods.

• Wash the pan immediately after use without leaving and not soaking them.
• Carefully wipe the surface with a dry towel, so that there is not the slightest trace of fat.
• When cooking, use only wooden or silicone spatulas. A fork or a knife you will quickly scratch the surface, and in the damaged areas will accumulate and the fat burnt.
• Not recommended pickle products in aluminum containers. Pickling is due to release acids from this aluminum starts to darken.
• After cooking always shift the leftover food from aluminum cookware.
• Store food in a dish can not.
• After washing, always wipe dry with a towel container.
• In order not to spoil the floor, try to cook on a slow fire. Do not leave the aluminum accessories in the wet state, this leads to darkening of the metal.

By following the simple rules for the use and storage of aluminum cookware, you can extend the period of its operation, to prevent possible harm to the health and save money on buying new pans.

VIDEO: How to easily clean utensils made of aluminum.