How to use an iPhone: the subtleties of the settings and the unknown functions

Useful option "Find iPhone": the basic concept and why it is needed

If you delve into the Apple brand recommendations, the developer strongly recommends that you activate the "Find iPhone" already on first-time smartphone. Declared option represents a protective mechanism that during power will help you find your lost gadget using tracking, even if the cell is turned off.

According to statistics, around the world due to the proposed regime was able to reduce the number of thefts "apple" of portable devices. This allows not only to protect the nerves, but also the financial resources spent on "doroguschy" purchase. For example, in London, the number of fraud with the iPhone dropped by 50%.

What we have at the activation of useful options:

• the ability to remotely remove all content from your phone;
• using iCloud utility to find a lost device on a map (it is marked by a green dot);
• activate the "loss mode";
• perform start signal, to facilitate the search for a mobile phone.

GOOD TO KNOW!(Click to see)

How to enable the option "Find iPhone" on the phone: Walkthrough

To make the launch of the built-in protector, you need to pass a simple algorithm for action.

1. Unlock your gadget, then go to the settings menu, which look for «iCloud» section.
2. Log in to your account: enter your email address and password. If done this before, you can skip.
3. press "Enter" after the above actions. It is located just below the data entry fields.
4. a window will appear in front of you in which you have to confirm permission to tracking data from iCloud.
5. Be sure to make a confirmation to determine geopozitsii your iPhone.
6. Next you need to go down on the screen to the bottom and find the label "Find iPhone».
7. Drag the slider so that it is lit in green, that is, has been included.

To disable the "Find iPhone», although it is better not to do this, you need to perform the same steps as for the activation of the same name is now only need to move the switch in the opposite direction.

How to find iPhone if it has run down and turned off

If you can not find it after the loss of the mobile device, then most likely, it will discharge, or someone deliberately disabled gadget. In that case, we will help special iCloud service, or any other device "apple" of the company, where it will be necessary to run the program "Find iPhone" and enter your information on the account.

If you have forgotten where you left the mobile phone within the house, you can sue him sound using icloud system. Please note that responds even discharged the phone.

What to do to find a stolen iPhone?

First of all, make sure that the disappearance of the fraudsters tried (in fact, you may have accidentally dropped this device or somewhere left). Only after that can be connected to the police search. It's worth doing if all attempts to find the device failed.

Ask the police to register your Apple in the databases of stolen phones on a special website. However, do not count on a quick search is often necessary to make this process a large amount of effort.

How to turn on / off the flashlight on the iPhone

If you are in possession of a smartphone, it frees you from any need to carry more and flashlight. In the cell of Apple run this application is quite simple.

1. To begin to unlock iPhone, then slide the main screen from the bottom of the screen upwards.
2. Before you displayed toolbar. Scroll to the icon with a flashlight and simply click on it.
3. Turn off the flashlight, you can by pressing the symbol.

If for some reason you have not called the bottom menu, then you must use the Flashlight app. If this is not the default setting, then you have to download from the AppStore store. Then simply log in to the program and press the "On / Off".

The latter method has a number of additional advantages, such as:

• built-in morse code mode;
• automatically set up an SOS signal;
• brightness change;
• stroboscope.

GOOD TO KNOW!(Click to see)

Use the video mode, which can be reached also through the lower popup menu or via the application menu. Go to label "Camera", look for the "Flash" icon. Activate it by pressing the button "On". To deactivate the torch, click on the "Off".

Running flash when a call on iPhone

The ability to run the light response of "Call" mode on the Apple phone is present on all devices with an updated operating IOS system. To activate the flash you need to do the following:

1. Unlock your phone and go to the "Settings" mode.
2. Go to the "General" section, and then enter the "Universal Access".
3. Find the very bottom of the item "Hearing", then go to "Flash Alert", which drag the slider to the "On".

This feature is quite useful for those who are hard of hearing, or simply always leaves iPhone in silent mode.

How to turn on and turn off the mobile Internet on the iPhone of any version

When your phone has the function of wireless WAN connections, you need to work in mobile traffic is not. However, in many versions of Apple, this function automatically connects. When its use is rapid discharge of the battery, to the same funds in the account written off more often. We suggest you consider how to disable and if necessary to include mobile internet again.

1. Again we unlock our cell, and then on the main menu, scroll to "Settings".
2. Once you open the corresponding window, find the mark "Cellular".
3. Drag the slider to the "Off" position, perform a similar action with the item "Enable 3G".
4. Be sure to check out what other functions have an Internet connection on mobile. If there is a slider next to "roaming", it too must be removed.
5. Pay attention to the list of applications that use mobile data traffic. If you do not need change the position of the switch.

If you use Wi-Fi connection, then turn off applications that consume the Internet, not necessarily, because after leaving Wireless distribution zone stops automatically update and installed caching programs.

Enabling mobile Internet to the Apple smartphone can be made via the "My Account" cellular or order setting to connect over the Internet on the official website of the operator.

Turn off vibration on the iPhone: a useful skill for students

A lot of people with a paired smartphone is. And it just so happened that it was very popular phones Apple. They are characterized by a rather loud and harsh vibration, which prevents even the established silent mode. To exclude this option temporarily or permanently, you need a couple of simple steps to consider in the following mini-instructions.

How to completely turn off vibrate?

To disable Vibrate gadget, you need to make a few simple manipulations, namely:

Illustration	Description of the action
Go to the settings, the label is located on the main screen. "Sounds" Next go to the point.
	In the "Vibration" slider must be set to "Off" position, that is, it should be white. Or simply put a check if the version of the platform is different.

The phone automatically stops responding vibration to incoming calls and notifications. You do not need to restart the device additionally or experience more variety of other settings.

How to turn off vibrate when the alarm

If in addition to the sound you do not need anything alarm clock, you can remove and Vibrate. To do this, go through two stages.

Illustration	Description of the action
Unlock the cell and enter the section "Clock / Alarm Clock". Click the "+".
	When the time is selected, be sure to press the sound. Where vibration, select "not selected."

This option is convenient because you turn off Haptic feedback for a particular alarm, but it is removed and a new, will have to reconfigure the signal again.

Turning off vibrate notifications from social networks

Jobs in social networks accompanied by the frequent arrival of notifications on your smartphone. Sometimes, especially in the middle of the night, they can interfere. To get rid of the obsessive "buzz", you need to disable this option. To do this, go to the Settings app, go to the "alert" and uncheck "Vibrofunktsii". Note that the slider should light gray instead of green.

How to enable auto-rotation on the screen ayfon

The "Auto-rotate screen" is useful when activity on social networks, and watch videos on hosting. But sometimes from the need to get rid of this regime, and to do so, follow our instructions.

Illustration	Description of the action
To begin with our unlock iPhone. To do this, press the button on the top of the cell housing.
	Next, call the built-in menu control settings. To do this, slide your finger from the bottom of the screen upwards.
We find among the available items labeled "clasp with a circular arrow." Click on it to activate or deactivate.

After that you can safely use any telephone utilities, and when turned it into a horizontal position of the image will not change the orientation.

A simple trip to the Apple phone geolocation

Geolocation - this is a very useful tool to help you find the desired location on the map and look for a lost smartphone. In addition, without this option, you will not be able to use the built-in navigation systems.

Set this up in just a few simple steps. Be sure to read this video.

Using the camera on the iPhone: how to enable / disable the shutter sound

There are several ways to turn off the sound of the camera. The easiest method - is to translate smartphone in silent mode. For this purpose, drag a slider of the device so as to be visible orange / red marker.

Turn off the shutter sound "dzheybreykom"

At the program level to eliminate the sound of the camera works only with pre dzheybreykom, with other system sounds will not be affected. To carry out manipulations you need to get a special software on your computer.

It turns out that you do intervene in the system files and make changes to it in the root folder of the mobile phone platform. Find the file there «photoShutter1» and simply edit the name in any way, important not to remove the content.

GOOD TO KNOW!(Click to see)

How to turn off the sound of the camera when the phone is not attached to the PC

Possibility to mute the camera is only possible in conjunction with disabling all system sounds. You can in the settings menu completely reduce the volume mixer. Call the control panel menu, pulling from the bottom of the screen to the top with your finger.

There are some Apple mobile phones modelsThat do not have off camera click function. These devices produce for sales in Japan, as there believe that any professional photographic equipment (even a smartphone), should publish a similar sound.

Power saving mode: how to activate and deactivate on iPhone

When you use the same Apple gadget for many years, you have probably noticed that the battery has become no apparent reason to lose charge. It happens from time to time, and to prolong the life of the battery a little bit, you have to regularly use the power-saving mode.

1. Go to the settings of the smartphone on the main menu (shortcut with gears).
2. Drop down to the "Battery" section.
3. Find the option "Power Saving Mode" and drag the slider to the "green status".
4. To turn off the set program, tap the touch switch again.

Thus, your cell will be able to a few hours to increase your productivity, and you may notice that the screen brightness and backlight have become a bit dull.

However, this is not all the features that Apple has a smartphone, and each year the developers are introducing new features for an even greater demand for cellular eminent brand. If you're not familiar with the phone functionality, and you have questions about the article topic, ask them in the comments, we are happy to communicate with their readers, so soon you will reply.