How to remove mold from wooden surfaces?

Owners of summer country houses often face the problem of the appearance of fungus on the tree. Mold - harmful formations that actively develop under the influence of constant heat and high humidity. Fungal microorganisms multiply by spores, which in the environment is a whole lot. In this article we will share with you recommendations how to remove mold from wooden surfaces without losing their aesthetic appeal.

to the contents ↑

How to remove mold from wood?

From a fungal infection suffer, first of all, wooden surfaces, since organic substances are the most attractive and favorable environment for the development of mold. Under the influence of high humidity and heat, wood quickly loses its attractiveness, darkens and disappears.

After seeing the first manifestations of the fungus, proceed to urgent methods of disinfection and its removal from the surfaces in the house. To do this, you will need one of the following wood mold remedies:

• antiseptic substances;
• wood bleach;
• vinegar;
• baking soda;
• hydrogen peroxide;
• drying oil;
• glue;
• liquid ammonia;
• drill;
• tea tree oil.

Important! With the right way of using each of these substances can effectively overcome the fungus on wooden surfaces and products.

to the contents ↑

Preventing the appearance of mold

Noticing the appearance of mold in your own house, immediately proceed to eliminate it, because if you start the problem and allow the fungus to enter the tree, then its permanent elimination will be impossible.

Important! Usually in industrial enterprises, wooden products are treated with special antiseptic compounds even during the assembly process. This procedure is able to prevent mold fungi in principle. However, quite often, when buying wood products, we understand that this stage of their production was ignored.

The appearance of moldy areas on wooden surfaces indicates a lack of dryness in your room, as well as problems with ventilation. To prevent their occurrence in the near future, you need to ensure the optimal mode of ventilation and humidity of the room. Otherwise, any manipulations will lead only to a short-term result, and the problem will return again.

to the contents ↑

How to remove fungus from wood?

To eliminate mold, you can use specially developed antifungal compounds, which are sold in every hardware store, among household chemicals.

Important! These funds can be used only if you do not live with allergies, because otherwise it can cause significant harm to human health.

All cleaning procedure is carried out in several basic stages that will ensure fast and high-quality achievement of the set goals:

Cleaning of the damaged surface

Starting the removal of fungal infections should be with the removal of spores in the most affected areas of the product, namely, stripping. This procedure is performed as follows:

1. Strip the fungus on the tree with the help of improvised tools and tools - a metal brush, a knife, a chisel, etc.
2. Dispose of the removed particles of wood with a fire, which will not allow disputes to further develop and contaminate the living quarters.
3. Wash the cleaned area of ​​the wooden surface with a soap solution.

Removal of mold spores

To prevent the appearance of fungal surfaces again, it is necessary not only to clean the affected areas, but also to destroy the spores in the room. You can do this as follows:

1. In a specialized store, purchase an antiseptic for wood.
2. Prepare the active solution in accordance with the proportions and instructions specified by the manufacturer.
3. Treat not only the affected area, but also a certain area around it.

Important! This method, how to get rid of the fungus on the tree, is best used in non-residential and ancillary facilities, because evaporation of chemicals can cause significant harm to health.

to the contents ↑

How to remove fungus and mold from wooden surfaces with your own hands?

There are a number of natural and quite safe ways to get rid of mold that hits wooden products and surfaces:

Method No. 1 - Acetic acid

The vinegar available in every kitchen is a natural and relatively harmless means of disinfection. To obtain the most effective result, use the substance as follows:

1. Fill the spray gun with concentrated acetic acid.
2. Spray the fluids on the affected areas.
3. Clean the tree with a brush.
4. Surface re-work and leave for about an hour.
5. Wipe surface with a damp cloth.

Method number 2 - Hydrogen peroxide

Hydrogen peroxide is a medical solution that perfectly copes with spores of mold and fungal infections. Buy the solution in any pharmacy and use it, according to the following algorithm:

1. Distribute evenly the 3% hydrogen peroxide solution over the affected area of ​​the wood.
2. Leave the surface for 10 minutes for necessary chemical reactions.
3. Remove all traces of mildew using a brush with stiff bristles.
4. With a damp cloth, return the product to an attractive appearance.

Important! Before applying peroxide, check its reaction with the product on a small area of ​​the wooden surface. The most qualitative result can be achieved using hydrogen peroxide and vinegar in a single complex.

Method number 3 - Baking soda

This substance is excellent for use as a remedy for fungus on the tree.

Important! In addition to the disinfectant, soda is also an excellent deodorizer, and therefore helps remove unpleasant odor from mold.

For maximum cleaning efficiency, baking soda is used in the following way:

1. A small clapper of clean cloth is soaked in water.
2. Wet the cloth in pre-soaked baking soda.
3. Wipe with a mildew of a moldy piece of wood.
4. Remove any debris from the wooden surface with a brush or a clean rag.

In this article, we shared with you in fairly simple but effective ways to remove mold and its spores from your premises. The main condition for achieving the desired results is the timely identification of the problem and the competent use of disinfectants.