Best Color Laser Printers for the home: how to choose among the best models

One of the most popular models in the past - HP LaserJet 1100

How to choose a laser color printer for the home based on the parameters

Color laser printer inherits all the features from the black-and-white brother. Just different colors and shades are formed sequentially, a few steps or at once in a single pass, after collecting all the colors on a single drum. That is, there is a whole bunch of different characteristics affecting these or other indicators. Let's look at what it is worth to pay attention.

Performance and speed

These two parameters are related, though logic is usually understood in different ways. Performance shows the total working life of the device. That is, the maximum number of printed sheets for a certain period. For example, often in the specifications of the printer indicate the value of 50,000 pages per month. It is, in fact, is the performance. How to choose the best color with performance suitable printer for their needs? Very simple - based on the work volume. For larger offices with large volumes of work had better pay attention to the printers with more headroom. If you need to buy an inexpensive color laser printer for the home, it makes no sense to overpay for performance, because most of it is still not implemented.

Incidentally, these two parameters determine the winner in the debate, a better color printer - inkjet or laser. Few inkjets which can print a number of pages quickly, and even with appropriate quality.

Print speed is directly related to performance. It reflects the number of pages printed for some time. Typically, for a minute. The higher the print speed, the better. But observed a direct correlation between this index and the price. To print speed applies equally important parameter - the first page. The fact that a printer for printing to heat the thermocouple. In fact, if we discard all the other preparatory operations - sending data, the preparation of the sheet to the press, the rate shows the heating time. Interestingly, run this parameter in modern devices may be in the range of from 13 to 66. But, in general, the smaller the time, the better, because the finished document can be accessed faster. It should take this into account when selecting a color laser printer.

print resolution and a buffer memory for data

Print resolution characterizes the same as the resolution of your monitor or smartphone screen. That is, the image detail. However, in printers made to measure the number of points that fit in one inch. You can often find such a designation in the printer specification - 1200 × 1200 dpi. This means that in a square measuring 1 × 1 inch is 1200 dots and the same adjustment in width. The larger the numbers, the better the detail and quality, similar to the screens. Interestingly, in the color laser printer can be two types of permits - for black-and-white printing and color.

Test Page option to test the color transfer

With the memory of a little more interesting. Whatever the format of the image data, or you go to print, the printer must always be a job for themselves converted to a bitmap. And for this he needs a memory. Theoretically, the larger the memory, the more complex graphics structures printer can afford to print in a continuous mode. In practice, however, even the low-cost color laser printers for the home can cope with virtually any graphics or data. But different laboratories or large enterprise, working with "hard" printing, try choose a device with more memory, since it is sometimes necessary to display really complex things. In general, if the budget allows you to buy a printer with memory more - we must take.

Types and cost of consumables

The color image is typically formed of several primary colors. Most often, three colors plus black. This means that the device is at least 4 cartridge. And they all have a property to end. And of their value depends on the economic feasibility of further use. Before you choose a color laser printer for the home or office, it is desirable promonitorit prices on ink cartridges. This will help to estimate the cost of printing and not to overpay when buying.

It would look like the classic toner cartridge

Now a little about the chips. Producers has been a trend in the chip cartridge installation. In simple terms - a small piece of memory that contains data on the number of pages printed. Upon reaching a certain value of the cartridge operation is blocked. After that, the chip need to be reset by either reprogramming or replace it with another. In both cases, it will need to pay. Although the network can find traditional recipes that help you to do this and at home. However, this will require the skills and knowledge of the nuances and the operation of electronic devices. In any case, before buying a printer, along with the price of the cartridges themselves, should find out the cost of chipping or reprogramming. It is worth noting that there are still printers without chips, but their number is steadily decreasing.

Power consumption and noise

Also quite important parameters. And if the house has to print from case to case, in the office it's quite true. Noisy printer, printing and non-stop to eat kilowatt hour, can bring to mind. Therefore, the noise performance is to choose on the basis of the application. For offices, if he will be in the same room with the staff, it is better to choose a model quieter. Housing can also neglected this feature if you are certainly not going to print out all assembly works of Russian writers around the clock.

The presence of two-sided printing

This feature is nothing but convenience and speed, it does not provide. But at the same cost of the device with such a functional can be significantly higher than without it. If the main front of your work - print bilateral forms, this "trick" significantly simplifies and optimizes your work. If you print a maximum of 5 documents per day, both bilateral and unilateral acts, it you do not really come in handy.

Best color laser printers with cheaper consumables prices

The price of consumables is very important in the end, especially for large offices and studios that specialize in printing. However, most of the cost of the printer itself is quite high. When you purchase is necessary to consider whether a one-time pay off a large attachment or not.

Canon i-Sensys LBP653 Color Laser Printer

The device has its own LCD display and has a direct printing

The printer itself costs 17 600 rubles. And the original cartridge at him 046 would cost about 5000 rubles. However, his life is 2200 pages. For this model, there are cartridges with the letter H in the marking - they are high volume. It costs about 10,000 rubles. and is able to print 5,000 pages.

As for the printer itself, then there is nothing unusual there. Resolution of the majority of these models - 600 × 600 pixels. Speed ​​- 27 pages / min.. The output of the first 8 seconds. Much memory - 1024 MB. There are both a network interface cable, and wireless. Maximum resource per month - 50,000 pages.

Brother HL-L8260CDW

This model, too, is a bit brutal

Not the cheapest printer - 22 800 rubles. Cartridges its calculated at 3000 pages, can be bought for 6000 rubles. There is also a three-dimensional versions. device resolution is 2400 × 600 dots. High speed - 31 pages / min.. The total resource is 40,000 pages per month. There is also a double-sided printing. There is wired and wireless interfaces.

Best budget color laser printers for home prices and reviews

Now Let us examine a number of inexpensive models that can be used as a home printer.

Kyocera Ecosys P5021

The device looks quite massive

This model differs primarily its resolution - 1200 × 1200 for the two types of printing. its speed is 21 pg. / min. And this is a very good indicator. The very first page with a cold start will appear after 11 seconds. Cartridges - 4, all 1,200 pages. There are advanced options - for 2600 and 2200 pages. Much memory - 512 MB. There are network interfaces, including Wi-Fi. Also, the device can print directly from the SD-card. In general, an amusing and interesting printer for 11 000 rubles. The truth is a little larger than the other presented models, sizes. So you have to dedicate to him more space.

Canon i-Sensys LBP7018C

Laconic black nice fit in the interior of the corresponding

This printer can be bought for 10 000 rubles. His life - 15,000 pages per month. Ideal for the home. Resolution interesting - 600 × 2400 for the two types of printing. Overall speed is 16 pages. / Min. The first page will be ready after 13 seconds. Stocks toner for color will last for 1,000 pages and black-and-white - at 1200 pages. Cartridge device - 4. Memory a bit, but for ordinary tasks it is more than enough. Noise device is estimated to be 50 dB, which is quite a lot.

Samsung Xpress C430

Elegant appearance without unnecessary elements

This model - is the cheapest in our top, its cost is only 8600 rubles. What is offered for the money? Not the greatest resource of 20,000 pages per month, date just for home use. Resolution also slightly surprising - 600 × 600 dots. good print speed - 18 pages / minute, as well as time to first page -. 14 for the black-and-white print. Color is released no earlier than after 26 seconds. cartridge yield is small - 1000 and 1500 pages for color and black-and-white cartridge. They are here, by the way, also 4. The amount of memory should be enough for domestic tasks - 64 MB. Network interfaces are absent altogether. That is, you can only print directly from your PC.

Best color laser printers for printing A4 with prices and reviews

Let's see what the market has to offer modern printers to print photos at home or in a small office.

Color Laser Photo Printer Xerox Phaser 6020

Probably one of the best color laser printers in the rankings. Positioned as a device for a small office. Although the stated resource is not so great - 30,000 pages per month. Both types of print resolution is not bad - in 1200 × 2400. Black-and-white village printer can print at speeds of 12 pages / min, and colored -. 10 pg / min.. Start time is only 19 seconds. It is also a good indicator among similar devices. Printing is possible on almost all - plain paper, envelopes, glossy. The maximum paper weight stated in 220 g / m2.

Print used 4 colors, ie 4 cartridges. The resource color should last for 1,000 pages and black-and-white - 2000. The amount of memory is enough for most office tasks and the house - 128 MB. Of the additional functionality can be identified Wi-Fi and support for AirPrint. It is this color laser printer for printing photos of 12,600 rubles.

Laser color printer Canon i-Sensys LBP613

Own control panel - it's convenient

The device resources cartridges are distributed roughly in half: 1,300 pages - in both color and 1400 - on the black-and-white. Used cartridge 4 from Canon type 045. There are also extended versions 045N with an increased supply of toner: 2,200 - for color and 2800 - for black and white. The amount of memory - a gigabyte. The maximum resolution for both types of printing - 600 × 600 pixels. The total printing speed is 18 ppm. / Min. In this first page, you can wait just 10 seconds. The general declared the printer resource - 30,000 pages per month. Worth vessel 11 000 rubles.

HP Color LaserJet CP2025 Color Laser Printer

HP often uses a creative approach to the look of their devices

Interesting printer Declared yield of 40,000 pages per month, the resolution is 600 × 600 pixels. Not the highest. With the speed, too, not everything went smoothly - a total of 20 pages / min, and the first will have to wait for 18 seconds.. But all is well with cartridges, which is 4. The resource color - 2800 pages, black and white - 3500. Out of the box device 128 MB of memory installed, but it can be supplemented with another bar to a maximum of 384 MB. No wireless interfaces. You can connect via a standard RJ-45. Reviews of this color laser printer is not the worst, although the price is a little bite - 26 700 rub.

If you have a printer at home or in the office, you can share your impressions from using it in the comments.