Laser printers are widely used around the world because of the very attractive cost per printed sheet.
CONTENT
- 1 How to choose a color laser printer, depending on the cost of the printed sheet
- 2 How to choose cartridges
- 3 How to choose a printer paper
- 4 About the feasibility of printing black and white documents on a color laser printer
- 5 The best models of color laser printers for home with cheaper consumables
- 6 The best models of color laser printers for office with cheaper consumables
How to choose a color laser printer, depending on the cost of the printed sheet
Firstly, we need a correct statement of the problem. If the printer is used to print documents only, and only occasionally - for photos and color pictures, then maybe we should not overpay for the color and select black-and-white version.
Also, there are differences between the use of a color laser printer in your office or home. Generally, in the home value of each printed sheet can be neglected, since the volumes are relatively small, and it is better to focus on selection and an additional functionality. But for the office, where the number of printed documents is large, it is necessary to take into account the price of each sheet.
How to choose cartridges
With the ink cartridge is very simple. Their use can be divided into three main categories: low-end solution, the golden mean and maximum quality. Depending on print quality requirements, you can select the cartridge. The highest quality and endurance will always be the original cartridges, which are produced either by the manufacturer of the printer or its partners. However, this is a very expensive option. Save a little help so-called remanufactured cartridges. In fact, it is the same original, collected from used. Naturally, it is believed that all the internal mechanisms of the original. However, it is difficult to check. Therefore, the remanufactured cartridge, though, and saves 30 - 40%, still a pig in a poke.
A cross between a maximum quality and maximum economy can be achieved by using compatible cartridges. In fact, it is a copy of the original products, which are developed by printer manufacturers do not. That is, technology, structure, shape and algorithms are the same, but the materials used are completely different. Naturally, if the manufacturer is responsible for the quality of its printing printer after testing the original parts, the part of the manufacturer is not responsible for virtually nothing. Yet, this approach is less expensive than the use of original or remanufactured.
Very often, laser printer cartridges, you can find the increased capacity.
Finally, the easiest and cheapest way - refilling cartridges.
Even the original cartridge has its own resource, after which the possible breakdowns and malfunctions. The manufacturer guarantees the highest quality only when using original toner. Moreover, this warranty applies to a certain number of printed sheets. Refilling is, in fact, "extends" resource for an indefinite period at the expense of print quality. But if the quality is not very high requirements, this approach is the most cost-effective.
How to choose a printer paper
On paper, everything is very simple. The manufacturer of the printer always indicates the recommended density. This value should not be ignored as it is not given in vain. This means that developers tested precisely this type of paper and can ensure stable operation and high quality printing.
Laser printers "do not like" too thin paper, so the recommended density is typically in the range of 50-200 kg / cm²
Going beyond the recommended settings - this action is at your own risk. The fact that the laser printer is a very complex structure. The abundance of rollers, machinery and electronics. Unlike the old dot matrix printers, which can print at least on papyrus, laser may be magnetized, jams, snack and even tear the sheet, wherein the desired density.
About the feasibility of printing black and white documents on a color laser printer
The printing system in color laser printers are also realized, as in the jet. That is, the overall picture is formed using several colors contained in different cartridges. They are usually 4: black, cyan, yellow and magenta. The black color has its own cartridge. So nothing wrong with printing documents on this printer is. However, if it is only printed documents, what sense to overpay for a color that is used once a year? In addition, the toner in the color laser printers are sometimes specific and refill or service may be more expensive.
The best models of color laser printers for home with cheaper consumables
What is primarily important when using a color laser printer at home? The cost of the device itself, the cost of consumables and print quality. We have chosen some interesting and most profitable printers for home use.
Samsung Xpress C430
The cheapest printer in our review. You can buy it for 9700 rubles. Despite this, it is able to issue a print resolution of 2400 × 600 dpi in color. The first color page out finished within 26 seconds, monochrome - 14 seconds. In general, the printer prints at a speed of 4 pages per minute in color and 18 pages per minute in monochrome. One resource color cartridge should last for 1,000 pages. The printer is very simple and has only one interface for PC connection - USB 2.0.
Samsung Xpress C430
Ricoh SP C260DNw
Model looks a bit of volume, but occupies relatively little space
More expensive printer for 10,700 rubles. Resolution printing it is almost completely similar to the previous model. But in print speeds noticeably wins. The first color photo is ready in 14 seconds, and the overall printing speed is 20 pages per minute. For the standard paper feed tray provided on the sheets 250 which, if necessary, can be extended to 751. The resource color cartridge rather Volume - 1600 pages. You can connect the printer how to use the classic USB, and through the network - Wi-Fi or Ethernet.
Ricoh SP C260DNw
Canon i-SENSYS LBP613Cdw
Comfortable and reliable design - one of the most important moments in the operation
The device of one of the leaders in this industry. You can purchase it for 13,000 rubles. Special unique abilities in the printer is not. The resolution is only 600 × 600 dpi for both types of printing. Speed is also relatively small - 12 pages per minute. Run in the density of paper to be used is from 52 to 163 g / m². That is quite a large range of suitable paper. The printer is more interested in the fact that in addition to the standard cartridges 1,300 pages can be used and enlarged 2200. For the rest, it is very simple printer for home use.
Canon i-SENSYS LBP613Cdw
HP Color LaserJet Pro M254nw
With each passing year, laser printers are becoming more compact
Another big-name brand with a very simple printer. At the same time, the cost of it a little overpriced - 16,000 rubles. Print quality for both color - 600 × 600 dpi. print speed of 21 pages per minute. The standard cartridge is rated for 1,300 pages printed. It is interesting that this model offers a variety of cartridges, including, and increased capacity to 3200. Connect the device can be on the network or the standard USB 2.0.
HP Color LaserJet Pro M254nw
The best models of color laser printers for office with cheaper consumables
Office model must guarantee a high share, quality and speed, as necessary to print a large volume of documents and materials. Accordingly, the consumables and their cost should not be put in jeopardy the existence of the office.
HP Color LaserJet Pro M452nw
Solid model for large volumes
The printer is designed to 50,000 pages per month. Resolution minimum for this class of printers - 600 × 600 dpi. color print speed is very decent - 27 pages per minute. Standard tray for 300 paper sheets advanced - 850. Naturally, the manufacturer has taken care and on cartridge - 2300 pages. If desired, you can install and more voluminous - 6,500 pages. To connect and use the network interfaces, and USB. Buy a printer can be for 20,000 rubles.
HP Color LaserJet Pro M452nw
Canon i-SENSYS LBP653Cdw
Canon has always been famous for the quality and reliability of their printers
This printer is in the same price range as the previous one - 20,000 rubles. And the characteristics are almost the same. Print share is calculated on 50,000 pages per month. Maximum resolution - 600 × 600 dpi. The printer has a good paper densities used range from 52 to 200 g / m². It can be used to print both regular cartridges with a resource of 2,300 pages, and increased - by 6300.
Canon i-SENSYS LBP653Cdw
Xerox VersaLink C400DN
Sometimes it is more convenient to print something directly from the printer screen
Very serious model designed for a large amount of documents. printer cost is 36,000 rubles. Resolution is not surprising - 600 × 600 dpi. But a great speed - 35 pages per minute in color. True warm-up of about 1 minute. Standard cartridge should last for 2,500 sheets and expanded to 10,000 rubles. Interestingly, the printer is set to 1050 MHz processor and 2GB of RAM.
Xerox VersaLink C400DN