How many boards in the cube: a table online calculator and calculations

High price construction and finishing materials It raises questions about their rational use. Wood always refers to one of the most expensive. If you are actively using it, it is desirable to know in advance how many boards in the cube. Table with reference data will determine the value. You can use the calculator cubing board, allows you to change the geometrical parameters in online mode timber and other products, it is possible to calculate the cubic meter of their own. To discover the most popular types of materials and features of their calculation.

Forms and types of timber, its features and useability

Before calculate how many boards in the cube should determine the type of material that will be used in the process of erecting or decoration a particular object. Specifics of processing and appearance of the timber determines its possible field of use. To discover the most common types and their main purpose.

edged lumber

At timber square or rectangular cross section. Its linear parameters usually exceed 100 mm. Used for the manufacture of core wood, which is treated with four sides. The result is the desired timber geometry but without finishing of surfaces. The standard length of the product is usually 6 meters. Deciding how to calculate the cubic capacity, the linear option should be considered mandatory.

Demand in the construction permanent structures. Considering the quality of the surface treatment, in a subsequent need additional decoration.

timber cut

Sliced ​​veneer lumber

solid wood used for the manufacture of sliced ​​timber. The choice is made in favor of logs without defects, with transverse dimensions greater than 150 mm. The most widely used bar with dimensions of 100 × 100; 100×150; 150×150; 150 × 200 mm. Last size usually made to order and has a higher cost of analogues with less geometrical parameters.

Sliced ​​veneer lumber is widely used in the construction residential homes and installation of interior partitions. High quality surface allows you to refuse to carry out more decoration.

planed timber

Sliced ​​bar

The cross sectional shape may be different. Manufacturers offer a bar with a square, rectangular or other cross-sectional shape. The requirements for the aspect ratio of the finished product. Their width can be twice the thickness. Last linear dimension may be up to 100 mm.

Solid wood products, subjected to special treatment, have a smooth surface. They are widely used in the construction of various buildingsTo the appearance of which make high demands. Widely used in furniture industry.

bar cut

Unlike sliced ​​cut block is not subjected to additional finishing. This significantly reduces the cost. Widely used in the construction of frame structures and assembly of structures, intended for mounting a facing material.

Eaves

Such a timber can reach a thickness of 100 mm, and in this case the transverse dimensions should be at least twice. In the production process the wood is processed from all sides. As a result, unable to provide the required geometric precision and the relative flatness of the surface.

Trimmed material was used in the performance of works of various kinds. Especially popular dyuymovka board, the size of which is numerically equal to 1 inch (25 mm). This thickness is demanded when lathing device, sex, and many other surfaces.

How to calculate the cube? It is sufficient to multiply the linear parameters to find the volume of a single product. Then one cube divided by the value obtained. This will let you know how much product will be in a cubic meter. Knowing the required number of items and how many of them in the cube, it is easy to calculate the volume of the order.

Eaves

Battens

Designed specifically for the device flooring. It has a width of 85 ÷ 140 mm at a thickness of 27 ÷ 45 mm. The choice of linear parameters of the product made in view of the subsequent operational load. Online calculator boards in the cube will allow to calculate how much to buy the material for the device floor covering a certain area.

floor board

edging materials

Unlike trim material, such timber has a lower cost, since its surface is partly or opilennye neopilennye edge (wane). Because of this, it is most often used in the manufacture of fences or erecting the blank surfaces.

How many boards in the cube: a table with standard sizes

Knowing how many square meters is required, as in the cube will be the boards it depends on the linear dimensions of the selected material. Using special directories (kubaturniki), it is possible without tedious calculations to find the required number of tables.

How many boards per cubic meter: the table will let you know without calculation

Reference tables contain information data for timber of different lengths. Before learning of the table, how many boards per cubic meter, check all line parameters, not just the width and thickness.

Most popular are reference tables for boards having 4 or 6. So, if we talk about how much edging board size of 25 to 100 mm will be in Cuba, be sure to specify the length. Chetyrehmetrovy - 100 pieces, six-meter - 66 (66.6). On this basis, determined as necessary lumber cubes.

Tip! If it is difficult to find reference tables, use the calculator cubic meters, which will help in a fraction of seconds to perform the necessary calculations.

After determining the number of the table, it is necessary to know how much weight cubic board. For this we need to know the moisture content of the material. To find the answer to the question, it is necessary to multiply the density per volume, expressed in cubes.

The basic procedure for calculating the number of boards per cubic meter

Before proceeding to the main estimates, and learn how to calculate the cube, you should pay attention to the unit. Wood unit of volume is the cubic meter. Often, as conventionally used notation cubic meters, cubic meter or cubic.

Attention! One cubic meter is numerically equal to the volume of a cube, whose edges have a length of 1 meter.

How to calculate cubic meters? It suffices to multiply together the linear dimensions of the boards and beams. Other words, the volume is equal to the product of:

V = L × h × bwhere

• V - the required volume of a cube, m³;
• L - length of the product, m;
• h - the height / thickness of the material m;
• b - width m.

Attention! All linear parameters should be expressed in meters. If the dimensions are in millimeters to meters for translating each original value must be multiplied by 0.001.

With the same amount of square meters per cubic meter as would be the product will depend on the chosen thickness. If the height of the material used is large, it is estimated will get less value in the cube. Reducing the thickness of the board can increase the number of products purchased.

Determining how many boards will need, it is necessary to consider the degree of processing of the material, grade and type of wood, which was used for production. For edged and unedged lumber calculation will be slightly different. The calculation should be amended taking into account the usable area.

Counting how many edging material is necessary, it should be:

• Determine the linear dimensions of a board;
• Find the volume of the product;
• Section 1 (cc) by the volume of one board to figure out how many will be in the same cube. According to the calculations can get a non-integer value.

To find out how much to edging board, will make measurements at several points. Thereafter, the desired linear dimension is averaged, and the obtained value is then used when performing settlement.

If a lot of boards, and their linear dimensions are different, starting the calculations are sorted by length and width. Desirably, the linear parameters differ up to 10 cm. Then measured the height and length of the formed stack. The measurement is performed in the middle of the height. The obtained result is multiplied by the correction coefficient, the numerical value of which is 0.07 ÷ 0.09 units. Its value can be found in the directory cubature.

Calculator cubing board

If you want to perform a calculation, calculator boards in a cube, shown below, will help you find the desired value in seconds:

Thus, knowing how to calculate the cubic capacity, it is easy to reduce construction costs. If you still have questions about the procedure for calculating, ask them in the comments.