Overview 5 species best Electric tile: how to choose what to buy, the pros and cons, features, rating

When laying the tiles need not only the installation skills, but also the existence of special tools, one of which is a Tile. Due to the fact that ceramics are very hard, but at the same time fragile, there is a real threat of damage visible surface during processing. And tile often cracks and breaks when the careless or improper use of the instrument. Tile Good electrical wizard is able to deliver the trouble and expense, progress more rapidly and more efficient.

How to choose an electric tile cutter

Electric tile mainly used where required to do a lot of work. Its main advantages over manual tool embodiments consist in the high speed and accuracy of cut of the material with small losses. But the tile due to the friction of the working part, rotating at high speed, much heat can be easily burst. For this reason, electric tile cutters are equipped with a cooling system of the treated material.

handmade Tile

The design of the electric hand tool is similar to angle grinder (Bulgarian). The difference lies in the fact that its components are designed specifically for working with tiles. For example, some models of the protective cover and the transparent covers almost half of the blade is equipped with a tube for connection cleaner.

Among the features of the tool:

• ergonomic handle;
• the presence of the support sole;
• possibility to adjust the angle of the tool relative to the work surface;
• the ability to control the depth of immersion of the cutting element in the material being processed.

Perform dust so Tile can only be in the horizontal plane and, therefore, already laid tiles do not get clean crop. Power is supplied from a household power socket or built-in rechargeable battery. The latter option is a tool more like a circular saw, grinder than has greater weight and dimensions. The main advantage to network peers - mobility and the ability to work in places where there is no mains supply. Hand tools are not characterized by high quality of cut. His goal - to replace LBM when working with tiles.

Tile from Regular underfeed

Cutting machine element with the underfeed is diamond blade, which together with the center stationary engine is located below the table-based platform, which fits processed material. Since the tile cutter has a water-cooling system, the lower part of the disc is located in a water bath, and cut tiles performs upper part. This type of device is widely used due to the compact size. As a rule, stationary tile cutters are equipped with guide rails that facilitate tile fixing. Most of the disc is under the desk, which severely limits the depth of cut material.

Advantages:

• compact size;
• opportunity to work with enlarged tile format.

Disadvantages:

• a small cutting depth;
• manual way of doing tiles, which implies poor quality of the undercut.

Tile from Regular upper feed

The tool is a machine with a moving engine and the cutting bladeLocated above the desk. These tile cutters are professional tools, they are:

• cantilevered - a fixed bracket and a movable platform;
• bridge - mobile cutting portion is moved along the guide rails.

For both types of machines are characterized by the following features:

• availability of guides, clamps and tires;
• the presence of the coolant pump;
• the ability to adjust the height of cut;
• to perform the cut at an angle of 45 °.

Stability and strength

Before buying the machine inspected checked quality of assembly and durability. The engine and the table should move smoothly along the guide rails, and the Tile - be firm and do not vibrate. Substandard materials will lead to a rapid breakdown in the structure.

size bed

On it depends the ultimate size of the tiles. To work with the stone required machine impressive size. To increase the length of the cut clamps are removed, but the quality suffers and ease processing. There are models, complemented by folding platforms or brackets, which can increase the size of the desktop.

cutting height

This option is usually regulated. In most cases it will be enough to 40-110 mm. The choice of machine should be carried out on the basis of tile material. Stone required cutting height of about 135 mm. If it is less, this will lead to overheating of the surface of the disc jamming and deterioration of the quality of the cut.

The power and the engine speed

To effectively cut tiles will be plenty of speed to 2-3 thousand. rev / min. The power also depends on the weight of the machine. it also determines the diameter of the disc material and tiles, which will ensure comfortable operation. So, for the tile you want to 230-250 mm in diameter and motor power 750-1500 W drive. For marble and granite required range of 350 mm and a power of 2 kW or more.

Cut angles

Most of the models are able to perform the cut at an angle of 45 °. Professional variants operate with intermediate angles. The process of transition to Reza under any available angles must be performed quickly and accurately. This should remain the precision of the machine.

Cooling system

Water is supplied to the cutting zone separate pump. Attention is drawn to the possibility to adjust the nozzle, the coolant circulation quality and efficiency of its removal.

Extra options

• The simplicity and speed of the cutting blade replacement.
• The length of the electrical wire and the quality of its insulation.
• Overview workspace.
• Ranges of adjustment.
• The ability to use different sizes of wheels.
• Easy to transport.

Best electric hand Tile

Very lightweight, yet functional tool DeWALT DWC 410 actively used by glaziers, decorators paver sidewalks and monuments. The presence of the water cooling system distinguishes this model from similar handheld devices. It is responsible for the safety of a large protective cover and wet cutting prevents dust generation.

The depth of the cut perpendicular to, and the ability to work at different angles make this Tile popular among the amateurs and the professionals. It is striking and its power that the low weight allows for a wide range of tasks, without restricting movement.

Characteristics

• Cutting parameters: depth - 34 mm, length - not limited.
• Ø disc - 110 mm.
• Angle Work - 0 ° -45 °.
• Motor power - 1,3 kW.
• Rotation speed - 13 thousand. rev / min.
• Weight - 3 kg.

pros

• A large number of settings.
• Ergonomics.
• Low weight.
• The presence of water cooling.

Minuses

• Using discs with bore diameter of 20 mm, which is hard to find.

Best electric Tile water cooled

Machine HUSQVARNA TS 66 R used for cutting porcelain, tiles and ceramics. Remarkable its intelligent cooling system volume of 15 liters with adjustable flow. Water is sprayed into the working area of ​​a powerful pump. By changing the angle of inclination of the cutting head, it allows to cut a chamfer at different angles, up to 45 °. Supported by a diagonal cut and a spacious work desk provides the convenience of handling a wide tiles.

Working with this Tile performed with minimal human intervention, as the cutting portion moves along the monorail located above the bed. Although this model applies to a professional, yet not enough to power the electric motor with high hardness stone.

Characteristics

• Cutting parameters: length - 660 mm, depth - up to 40 mm.
• Ø disc - 200 mm.
• Angle Work - 0 ° -45 °.
• Engine Power - 800 watts.
• The rotational speed - 2.8 thousand. rev / min.

pros

• Quality controlled cooling.
• Stability.

Minuses

• No ruler.
• The relatively low power.

Best electric Tile with upper feed

Tool DeWALT D24000 able to cope with any kind of tile. It has a powerful engine, liquid cooling system with two water jet nozzles and the ability to cut at an angle. Works with tiles to 610 mm in length, the depth of cut is 95 mm. Cutting accuracy improved by two stops provided. At an angle of 45 ° can be performed without pre-cut mark. High safety and purity workflow is achieved by total enclosure of the cutting blade.

Tile This model has a relatively low weight, so that its transportation and setup does not require much effort. For ease of cleaning stonecutter feed table can be easily removed. On the power cutter can be installed devices for water collection, which at the same time perform the function of trapping the spray.

Characteristics

• Cutting parameters: length - up to 610 mm, depth - 95 mm.
• Ø disc - 250 mm.
• Angle Work - 0 ° -45 °.
• Engine power - 1600 watts.
• The rotational speed - 4.2 thousand. rev / min.

pros

• Power.
• High-quality cooling system.
• The exact cut any material at angles.

Minuses

• Cost.

Best electric tile cutter with bottom feed

Tool with unlimited cutting length ELITECH PE600 It stands out among similar equipment. Qualitative diamond disc of 180 mm diameter is driven to rotate the motor power of 0.6 kW, which allows to work with high efficiency with ceramic tiles and granite. The machine is equipped with a cooling pump action.

Cutting tiles diagonally facilitated by the presence of various additional devices. The security system includes a plug with an integrated differential machine. The main body is mounted convenient carrying handle.

Characteristics

• Cutting length - is not limited.
• Cutting depth - 34 mm.
• Ø disc - 180 mm.
• Angle Work - 0 ° -45 °.
• Engine Power - 0.6 kW.
• rotation speed - 2950 r / min.

pros

• Copes with pictures of any length.
• Easy to use.
• High-quality saw blade.
• Adjusting the height of the disc.
• Good liquid cooling.

Minuses

• Bulky appearance.

Best Professional Electric Tile

The machine is well-designed DIAM SPmax-250 / 1.5 It equipped with a powerful engine, a large work desk, the stops for the plates. The carriage is adjustable in height, and the cut can be made at an angle. Tile provides convenient operation through the installation of the legs, has an increased service life and elaborate liquid supply system in place of cutting, thus eliminating damage to the tile and its overheat.

The main advantage of this model Tile over its competitors - high performance. Quality cooling allows the machine to operate non-stop for a long time.

Characteristics

• Cutting parameters: length - 900 mm, depth - up to 60 mm.
• Ø disc - 250 mm.
• working angle - from 0 ° to 45 °.
• Engine Power - 1.5 kW.
• The rotational speed - 3 thousand. rev / min.

pros

• Power.
• The longer length of cut.
• Functionality.

Minuses

• A lot of weight.
• Material quickly rust.

When you select Tile you must determine the type of work for which it will be used. If this is a rare cutting tiles, where there is no need to use precision equipment, electric hand tools fits perfectly. In the case when it is required to cut large amounts of plates, and with high precision, become indispensable stationary tile cutters with water-cooled high productivity.