Than to bleach a bath in house conditions?

One of the most favorite places of a person in an apartment is a bathroom, but strangely enough, the idea to clean the bath itself is usually visited by people very rarely. When the time comes for general cleaning, among other things, how to clean one or the other in the house, at some point your view accidentally falls on the bathing pan and you wonder how to whiten the bath at home so that it does not look like a crackedland after a drought. To help you and your aesthetic impulse in this article, we'll talk about how to clean and bleach a new bath so as not to damage the coating, and how to whiten a cast-iron bath.

to the table of contents ↑

Kinds of baths

Strangely enough, but often new baths get dirty and get stale more quickly than old cast-iron baths. What can I say, Soviet producers really knew how to produce a quality product. But modern bowls are much more convenient, they have a variety in design and shape, it is easier, therefore replacement of bulky sanitary ware is actual today.

So, for starters, the types of baths, there are only four:

• cast-iron;
• metal;
• plastic;
• covered with acrylic.

Here we will pay attention to cast iron and acrylic bowls, as these baths are used most often. What should be taken into account here:

1. The feature of the cast-iron bath is that it holds the temperature perfectly, but quickly accumulates plaque. This plumbing is easier to clean, it can be subjected to a global rough cleaning and nothing terrible will happen if you approach with the mind.
2. Acrylic retains its exquisite appearance for a long time, but the coating does not tolerate such tough handling, it is necessary to treat it extremely gently.

Note: You can apply the same methods of bleaching to a plastic bath that is suitable for acrylic, and for metal - the ones for cast iron.

to the contents ↑

Prevention

Separate attention deserves care of the bathroom. Despite the fact that this container is often subjected to wetting, when you are not using the bowl, make sure that it is completely dry. Surely, you often noticed rusty stains on the bottom of the tub, when there are pools of water there.

Always keep a clean, clean rag in close proximity for cleaning the bowl after using it for its intended purpose. This simple action will be enough to make you less likely to wonder than to whiten the bath at home.

Important! Make sure that your plumbing was in order and that the tap did not drip or run out of water - in addition to keeping a bath, you will also save on water consumption.

to the contents ↑

How to whiten an old bath at home?

As it was said above, old containers are sometimes better than new ones, but after time, even at the most clean hostess, the old bath gets a dark coating. This time action and nothing to do with it. How to whiten an old bath at home is not an easy task. Enamel has already suffered significant changes and lost the qualities that were peculiar to it when it was new.

To date, there are several effective ways to bring the coating into proper shape - both with the help of chemistry and folk remedies. We will tell you about them now.

Heavy artillery

Many do not "bother" and use tools such as "Domestos" and others - those that are designed to clean the toilet. The special effectiveness of means for cleaning gas stoves was noted by users who use them to clean the bowl for bathing.

Important! You can try this option as an ambulance, because these are very strong substances that will remove everything from the coating that has accumulated on it. But since usually such household chemicals are very aggressive, with frequent use, enamel can collapse much more quickly. Mark this for yourself and for regular use, choose more gentle means.

More sparing, but effective ways of

If you decide to act more correctly, we offer you such effective solutions. They will require a little more effort from you, but you definitely do not damage your plumbing.

You will need:

• ordinary sponge for washing dishes with a hard overlay on the other side;
• brush with iron bristles;
• cleaning powder;
• chlorine bleach( whiteness);
• oxalic acid;
• soda;
• vinegar;
• anti-rust agents.

First method:

1. Wet the bowl.
2. Spread the cleaning agent over the surface.
3. Wait for about an hour.
4. Treat the container with a metal brush, most thoroughly where it is dirtier.
5. Wash with running water.

Second method:

1. Dilute the soda with water to the state of gruel.
2. Apply the resulting mixture to the bath.
3. Leave for 5-10 minutes.
4. Mix bleach and vinegar in a ratio of 1 to 1.
5. Apply to the surface of the bath over soda.
6. Leave for 2 hours.
7. Rinse well with clean water.

Third method:

1. Wipe the container with a brush well.
2. Rinse the extracted dirt and rust with water.
3. Oxalic acid, diluted with water in the form of gruel, apply to the entire surface, where before it was brushed.
4. Leave this all for 20-30 minutes.
5. Rinse again with water.

Fourth method( for lazy):

1. Put water in the water tank to the brim.
2. Pour there 3-4 bottles of whiteness.
3. Leave overnight.
4. In the morning, let out water and rinse very thoroughly with running water, while wiping the surface with a sponge.

Note: After all the procedures, do not forget about mixers and treat them with rust and limescale. Work with gloves.

to the contents ↑

How to whiten a new cast iron or metal bath with

enamel The new bath has not yet come to a very bad condition and you can use more gentle methods. How to whiten a cast-iron bath to preserve its freshness and freshness, you will find out below.

You will need:

• ordinary sponge for washing dishes with a harder lining on the other side;
• soft brush;
• cleaning agent for plumbing;
• liquid ammonia;
• washing powder.

The first way:

1. Type in the cup very( very!) Hot water.
2. Leave it for 15 minutes.
3. Drain the water.
4. Wipe the enamel with ammonia with a sponge.
5. Leave the alcohol on the surface for another 20-30 minutes.
6. Apply detergent and rub with a soft brush.
7. Rinse with clean water.

The second way( for lazy):

1. Water the bath with water.
2. Apply a special cleaner for plumbing.
3. Rub with a sponge.
4. Rinse with running water.

Note: Do not use chemistry frequently. No matter how it is written on the bottle, in any case it can shorten the life of the enamel faster than the use of ordinary kitchen tools such as soda and vinegar.

to the contents ↑

How to fix an acrylic-coated bath?

How to whiten the bath at home, if it is covered with acrylic? Any kind of gentle-prenazhnym means, which are only invented for this purpose. Do not use what is written above, in any case. Acrylic capacity - not an expensive pleasure, it is not necessary to spoil it irrevocably in the name of purity.

The easiest and most effective way to bleach and clean the acrylic tank will be the use of special products for such baths that you can buy at any household chemical store. And from folk ways, again, there is only one - to clean the bath with a sponge with a dishwashing liquid.

If you need to clean the bath more globally, buy a special repair complex for cleaning and polishing the acrylic bowl, which is usually sold in the shops "All for repair."

Make sure that it's easy to whiten the bath at home? And now, arm yourself with the necessary devices, means, and act! Let your bathtub be perfectly clean, and you are content with the fact that you managed to quickly restore it with improvised means for 1 day.