Inflatable boat with a sail: design, how to choose

Inflatable boat set sail on it, gives pleasure expanse of water, and the movement speed of the wind strengthens. Small vessel, originally equipped with a sail, are rare. The most common equipment is installed separately ready-made sailing or sewed themselves.

Features

Speed ​​boat movement is determined by:

• management experience sailing vessel;
• direction of the basic course relative to the wind;
• value stiffness and streamlined, and the material from which the sail is made;
• location and equipment design;
• the number and distribution of goods;

Choosing the vessel for sailing, should be tailored to suit the manufacture of sailing equipment. Traditional material - thick cloth or canvas, are gradually replacing the current products from polymers. They possess high strength, low weight and durability life.

A vivid example of such innovations are the elastic inflatable sails, which are assembled together with the boat take up little space.

Correctly chosen and manned sailing facility set fifteen minutes. Note that setting a sailing boat design to initially assuming no such kind of walking, reduces the capacity by reducing the displacement volume of the cockpit.

The design of an inflatable boat with a sail

Making a choice of swimming means, should take into account:

• bottom type;
• type of flooring on the bottom;
• construction of cylinders material;
• capacity and capacity;
• structure transom device;
• ease of fastening seat;
• fittings and accessories;

bottom type is divided into flat and keeled structure. Flat-bottomed vessel less stable at high speed and movement are affected by strong winds and waves. The advantage of the flat bottom - resistance during parking and the ability to quickly go to hydroplaning.

Such models are cheaper, and the design is simple compared with swimming agents with keel-shaped bottom. Vessel with the keel have a bottom along the outer side of a further cylinder, which when filled with air takes a V-shape.

They are stable in motion, easy to operate at high speed and easily cut by a smaller wave resistance. For sailing swimming facilities are better suited to keel-shaped bottom, since they provide greater control during high speed movement through the water.

type of flooring in ships it can be different - pinion, rigid and inflatable deck. On this depends the convenience and speed of movement of swimming means.

Simple type of flooring - rack consisting of aluminum or plywood strips, inserted in special pockets and hold the pressure in the cylinders. This is the easiest way to give additional rigidity to the bottom and at the same time, it is very inconvenient, since rail interfere comfortable movement, getting tangled in the legs.

Hard type of flooring is made of aluminum, sometimes plywood frame. It ensures comfortable use and the smooth running of the swimming facilities at high-speed driving on the water.

Advantages inflatable deck lies in the fact that it consists of two layers of material sealed modern connected kapron strong filaments. The thickness of a few centimeters is comparable to the density plywood profile and ensures greater buoyancy vessel, the protection of people in it and the relatively comfortable conditions of being inside.

When using an automatic pump can quickly inflate or build a boat without a separate special places to transport solid or split frame rails.

The choice of materialOf construction of the boat is important for safety and long service life. Modern inflatable vessel made of Hypalon (chlorosulfonated polyethylene) or of polyvinyl chloride. The first wear-resistant even under constant mechanical contact with the surfaces, ultraviolet light and chemicals.

But it is more expensive than PVC products, which are cheaper and simpler repaired. The density of the material determines the size, capacity, weight and practical use of the product - the denser the material, the more reliable to operate a sailing vessel.

For safety it is better to deal with a repair kit and pump, because the material can accidentally snag or puncture the sharp fin of big fish.

quality seams It depends on the method of joining the base material - gluing or welding. Modern technologies and materials make the seams are equally reliable, but welding is considered to be more technologically advanced and durable option. Manufacturers prefer to use both ways to connect.

You need to carefully inspect the seams for the presence of defects - wrinkles, inflated and in good faith glued areas. Qualitatively made seam looks neat, do not over-tighten, not unnecessarily bent.

It is also important to pay attention to the bottom inset cylinders. It is required to be performed on one level and does not contain excess folds and wrinkles. In place of the bottom connection to the transom, with proper manufacture, free of any protrusions that prevent normal operation of the engine.

The size of the boat for two people is an average of 3.5 meters in length. If the operation takes place in the small expanses of water, you can use a smaller vessel, to the detriment of their own comfort.

Nominal load swimming means is higher than the real working volume. Hoping to download the desired quantity of the catch, do not focus on these items, as they are not physically able to fit in the cockpit.

Weight watercraft is determined by the cylinder sizes and equipment, which must be different, and the property of compactness easily disassembled and stacked on the bottom.

Area and height of auxiliary sail shall not exceed the permissible values. It is essential that an inflatable boat was equipped with a remote keel, preventing drift sideways or demolition.

Transom - an element of a high-speed fishing boat, which is worthy of attention when choosing a boat - how well it is made, and is glued to the design model.

commonly used waterproof plywood or aluminum frame to create a durable light transom. To the transom is not damaged due to the interaction of the engine clamps, it sets up a special protective metal cover.

The transom is fixed at an angle of 10 degrees with respect to the vertical, for the best possible tilt motor and any model power.

Seats (banks) made of reinforced plywood or plastic. It is important to pay attention to the way seat mounting to the cylinder:

• alloy nest of polyvinylchlorid provide rigidity fastening by pressure of air in the cylinders. When the depth of seating grooves may fall out of the slots. They can not be moved, because they permanently clamped between the beads;
• liktros-likpaz - a device consisting of a solid base which is mounted on boards, and the special form of the most banks or special design laths seat bottom. It is installed in any suitable location for a comfortable fishing;
• belt loop with a fixed them a jar tightening the inflated balloons, thereby achieving a certain rigidity. The disadvantage of this method of seating accommodation stands a high probability that the seat will fly out of the loop in a critical situation;

Supplies and accessoriesComing complete with inflatable boats offer the possibility of replacing parts.

Enclosing a sturdy handle is essential for carrying goods in the assembled state, because the inflatable has a significant weight and volume. Mounted in the aft drain hole prevents the accumulation of water trapped inside, which is poured out without necessarily turning vessel.

Corpus safe sailing vessel necessarily equipped with special features. Cylinders are protected fender or replaced parts that discourage the wave and push back the thicket at the swim in a creek. At the prow of the boats has a towing eye.

How to choose an inflatable boat with a sail

To transform an inflatable boat in sailing small craft, set her power frame the necessary rigidity. It is secured by means of special hinges, glued to the side cylinders.

Need a mast for safe installation of the watercraft sail and rudder control, which is better to fix the right edge of the stern. For such purposes, choose only high-quality durable PVC boats.

Choosing an inflatable boat, which will sail important to pay attention to the manufacturers with a good reputation. These companies guarantee the high quality of its products.

Large manufacturers are changing defective inflatable boat on the new or replacement guarantee parts and equipment items. Production of well-known companies - is the key to long-term use of the products, wear-resistant materials, as well as the opportunity to purchase the right item for replacement in service centers or official stores.

When choosing a boat is important to consider the color scheme, ease of placement, the estimated number of people. Time spent searching, will be repaid in full with pleasant emotions and unforgettable hours spent sailing the vessel.