Top photo finish inside the bath

bath at their summer cottage or a country house is a favorite place for rest and relaxation. Its advantage is difficult to underestimate. After bath procedures normal sleep, recovering pressure, cleans. No modern Jacuzzi or pools can not be compared to the advantage of the steam room. Modern trends come and systems improvement, so the owners are trying to fill them with the maximum comfort, making emphasis on health. Top photo finishing baths inside, material selection and sequence of work to help yourself through a simple process.

Milestones finishing bath inside

Build a box bath - it is half the battle. It is necessary to choose high-quality finishing materials, install oven and perform correctly all the internal work. The slightest error at any stage could lead to big problems in the future, to fix that would be quite difficult.

Domestic work can be divided into 5 stages:

1. thermal insulation -from the quality of work depends on the preservation of the heat in the sauna. The sequence works as follows: waterproofing, warming, Steam bath and the inner lining.
2. installation oven. At this stage it is better to seek help from professionals. They prompt the place properly made bends. You can buy ready-made design that is not inferior to the classics. In addition, it can be set independently.
3. wiring you must perform the extra insulation.
4. Inner trim.
5. Installation of furniture, benches, bunk.

The choice of material and the best photo finish inside the bath

After completion possible to start the internal finishing bath. By choosing a need to prepare thoroughly to study the properties of all materials offered. They must meet the following conditions:

• Resistance to elevated temperatures, high humidity;
• materials shall not release toxic substances;
• safety, when in contact with the body do not cause burns;
• do not require special care, easy to clean;
• be eco-friendly;
• interior should be visually well perceived.

Important! When you select a skin made of wood should be favored hardwood. Please be aware that at elevated temperatures coniferous resin is isolated, which is rather unpleasant to the touch. Low resinous has cedar.

Molded

Molded suitable for interior finishing baths Russian built from blocks, aerated or timber. The only thing that should not have to choose - conifers because of their increased gummosity. The material has a number of advantages:

• environmental friendliness;
• Simple installation on the crate;
• reasonable cost;
• base under the lining breathes, allowing controlled humidity. This prevents the development of mold and mildew.

Tip! If you are working with clapboard enough experience, you need to choose a material with the profile of the ridge - groove. It will not move during operation, thereby maintaining the density of the joints.

Block house

This finish is suitable for baths, built of aerated concrete. It is planed round board with lateral tongue and groove joints. On the inner side of the cut grooves for special ventilation. Blockhouse due to its characteristics is ideal for finishing:

• supplementary warming due to the thickness;
• environmental friendliness;
• when processing antiseptic high resistance to fungus and molds;
• aesthetic qualities.

However, for the baths do not fit each board. According to its characteristics blockhouse manufacturers label. Classes B and Cto finish is not used. You can only use marked A or extra-class. They are well polished, they complete absence of knots, cracks and damage.

Material attached to the pre-configured lath surface necessarily processed antiseptic abutment to the oven space insulated with mineral wool.

imitation of beam

Beam imitation for interior finishing baths gives the impression that the walls are finished board. But it is more practical and durable. This material has a great advantage - low cost. In addition, he serves as an additional heat and sound insulation, which improves the microclimate of steam.

Tip! Before performing the trim material to unpack and leave the room the bath for a few days.

The material is laid on and peeled primed pre-formed on the surface lathing. Before that, you need to put a heater and waterproofing layer. After mounting necessarily covered with a protective lacquer.

Tile

For pomyvochnaya best suited tile tile. It is easy to clean, durable, even on the floor when tactile contact is not to everyone. In addition, it is not safe, high risk of slipping on wet surfaces. But you can find a way - with wooden lattice.

For a guy with his own special tiles. Professionals advise laid material with glazed coating, it is resistant to temperature spikes. Floor should be chosen rough surfaces - it is safe. In terms of practicality and aesthetics, properly selected tiles for the bath - this is the second, after wood finishing material.

Other materials

When planning the interior finishing baths can move away from the classical canons and implement unexpected solutions. For instance, a rock - a rather unusual choice. Alternatively, the salt stones, with which you can get additional benefits. This is an expensive pleasure, which requires careful thought the interior.

For the waiting room can be used bamboo and vines. They have certain advantages: durability, wear resistance, although the value can not be called cheap. In addition, they are not suitable for steam, constructed of aerated concrete. Interior restrooms and bath, decorated with vines, you can see in the photo gallery.

The basic rules of the finishing of floors in the bath

To begin the floor deck immediately after the construction bath. It is the coldest spot temperature therein does not rise above the level of 30 °. Therefore, no matter what has heat insulating properties covering the future. You can select concrete, Ceramic or wooden base tiles.

The main rule when performing the paving - ensure the outflow of water from the bath. Modern builders prefer wood or tiles. the complexity of the work does not cause her the strength to perform on their own. You can take advantage of several advice of professionals:

• tree before laying to be treated with an antiseptic, which protect against the formation of mold and mildew;
• when mounting the tile grout is selected from water-resistant properties;
• on the floor you can put a wooden lattice, which should be dry after the bath procedures. This prevents slipping on wet surfaces.

Methods for floor heating device in the bath

Modern building requires the maximum comfort for the person, including when the device bath complexes. It is not only an opportunity to warm up, but also to relax. the need for the device underfloor heating It arose when they began to make concrete, due to the fact that the service life is 3 times higher than that of wood.

You can install water and electric floor. Water demand preliminary pipe wiring and connect them to the heating equipment. It is not always possible. Therefore, often the choice is made in favor of the second system.

Electric floor safe in the sauna complex. The system is mounted in the coupler. Pre should prepare a concrete base. It is important when installing to avoid mistakes, to correct which will subsequently be impossible. Therefore, the work to be transmitted to specialists.

Warm floor you can do it yourself by laying additional insulation materials:

• mineral wool;
• expanded clay;
• felt;
• foam.

This will require pour concrete layer 2, between which should pave the insulation.

Warming and waterproofing of walls in the bath

Warming steam must-carry. This will help keep the useful heat. You can use mineral wool, which is placed on the crate. But this is not recommended for stone or concrete walls, as you need a device more ventilation. Insulation should be cut with an allowance of about 5 mm. Joints after installation, secure the mounting tape. As waterproofing using aluminum foil or polyethylene film.

In the video process below is internal finishing bath.

Nuances interior trim their own hands clapboard baths

Molded - is a favorite and frequently used material for interior finishing baths. Many people like the smell of pine in the steam room, but is not recommended for such breeds. The maximum that can be - is to fulfill the changing room finishing pine.

The following tree species are also suitable for the lining:

• cedar;
• larch;
• aspen;
• Linden.

It is possible to lay boards vertically, horizontally or perform a pattern of rails. It is important to work to lay the foil vapor barrier. If desired, interior finishing bath lining their hands operate herringbone parquet or by analogy using klyaymerov. The gaps at the joints closed plinth.

Tip! For a guy you can not use the material with knots. Their density is higher than that of the array. When exposed to high temperatures they will fall.

Interior and inner finishing bath: gallery

Modern bath - is a complex plan which includes not just a steam room and a waiting room with pomyvochnaya, but also the font, swimming pool, recreation room with a pool, beds. It all depends on the financial capacity hosts and personal preferences. To each of them imposed special conditions when choosing furniture finishing and filling:

• dressing room for changing clothes, so the heat Saving it is especially important. Moreover, the conditions should be comfortable, for this you should consider furniture and clothes hangers;
• -Place steam room for relaxation and enjoyment. The main requirement for materials - environmentally friendly and safety;
• washing for finishing selected practical, resistant to moisture materials.

Consider the details of their choice with a selection of photos interior decoration of each bath room.

Design steam bath

Steam - is the main bath room. As a rule, it is small in size, which causes some problems in the design. Filling should be stylish, inexpensive and simple, you need to leave space for the circulation of steam.

For the wall and floor finishes as optimally use wood and lining. This is the most environmentally friendly materials, in addition, have a natural insulation. Ideal - a linden, it is not exposed to high temperatures for a long time preserves the pristine purity. It can be combined with wood trim stone or brick. To finish the oven ideal - natural or artificial stone, brick.

Tip! For a guy conifers are not suitable due to increased gummosity. You can not use chipboard, fiberboard, linoleum as they are toxic at high temperatures.

Furniture for the pair need to pick a strong and well-polished. The ceiling should be set spotlights. Offer see beautiful photos sauna inside finishing.

Interior pomyvochnaya bath

Pomyvochnaya can be separate room in the house or room with steam. In this case, permissible tree decoration. High temperatures kill mold. If pomyvochnaya provided in a separate room, you should consider the exhaust system. With a good air circulation can choose to finish coniferous resistant to moisture.

Tip! For pomyvochnaya synthetic materials can not be used, which release toxic substances.

Tile great clear coat material to perform finishing in wet conditions. It is durable, practical, easy to care for. In addition, a wide variety of textures and patterns allows you to choose interesting solutions. The washing necessarily need to provide for the installation of shelves, benches or deck chairs. On the floor you can put a wooden lattice.

shower room

Rarely in design projects for a shower bath separate facilities as a consequence of the limited budget. To finish glazed tile - is the best solution. Excellent choice - tiles imitating wood. On the floor should choose a rough surface, for further security laid wood lattice.

You can set the device oblivnye - barrel the ceiling with cool water. This is an excellent tool for improving skin tone.

room interior design rest in the bath

In choosing the material for decoration waiting room or rest rooms must be considered long-term exposure to elevated humidity. In addition, it should keep warm. it is not desirable to use the tile. Tree - this is the best material, it is environmentally friendly and has a calming effect on the person. In addition, the natural smell is very good for the respiratory system. Interesting design with a waiting room clapboard presented in the photo gallery.

You can choose the lining, imitation beams, vine or bamboo. This interior looks quite attractive, plus they are practical to use. To maintain heat laid an additional layer of insulation.

Recreation room filled sofas, seating and sun loungers. You can organize a tea corner with a samovar. And of course the presence of a large table. Design baths with rest room inside you can see in the photo collection.

Locker room bath

As the theater begins with a hanger, and the first impression of the bath is created with a visit to the locker room. Main for her - to save heat, so you need to consider additional warming premises in the performance of finishing works. In addition, we must pay attention to the tightness of windows and insulation of the front door. Be sure to install the nut, which protects from the wind.

Furniture choose only quality materials, preferably wood or high-strength plastic. necessary to have mirror. For clothes, you can use the hooks on the walls or install cabinets, benches or chairs. Ideas for filling the baths are in different directories.

Related article:

What mini-bath to give, Advantages and disadvantages of the design, as it is to build and what materials are needed, review finished models on the market, tips and expert advice - read our review.

Photo gallery of beautiful design options baths inside and outside

From the external design of the bath complex depends on landscape design. Therefore you should consider when designing The façade and porch. May be completed with decoration small architectural forms and vegetation.

If allows land area, it is desirable to arrange a small pool or pond. Photo gallery baths inside and outside will help make the right decision.

1 18

Related article:

Bath with his hands. Projects, photos, video, design, site selection for placement, step by step instructions on construction, how to make indoor lighting, useful tips and tricks - all this in the material.

conclusion

If you decide to build a sauna, the approach to each stage should be prepared as much as possible, it is impossible to neglect the little things. Interior finish - it is not only investments, but also to design a fantasy, the choice of style and skill. Austere environment is not conducive to relaxation. Many nuances and details add to the comfort and enliven the interior. Ideas for decorating a bath in your own hands can be found in the photo galleries.

Have you read our material means, in terms of construction and arrangement of the bath. Share with us your findings and interesting solutions. Our team is waiting for your suggestions in the comments.

Ideas baths interiors you can see in the video below: