Wall-mounted electric convector heating with thermostatic control

What is an electric convector heating: differences from the standard radiator and operating principle

Some customers came to the store, begin to ask, "Do you have any available wall electric radiator heating?". Most often, such a person has in mind convector. Unfortunately, without knowing the differences and specifics of the equipment, there is a risk to take a product that does not provide adequate heating. So what's the difference?

Standard radiator heats its surface and was subsequently "flushed" the body transfers heat to the entire space of the room.

Convector, in turn, takes the inward cold air, warms it and then lets out the hot air flow.

The electrical modifications all processes and temperature control are performed at the expense of electronic elements.

The principle of operation is surprisingly simple and clear even a child - cold air having a higher mass flows through the openings in the base of the convector. Inside it is subjected to thermal influence from the heating elements. Treated air becomes lighter and the action according to the laws of physics starts moving upwardly through the slot.

Mobile supplies: gas heater to give a balloon.In a special publication of our portal, we describe in detail about gas heaters with a balloon. You will learn about the main types of heaters, advantages and disadvantages and familiarize with the prices.

The basic unit of electric convectors

Housing before us everyday heater in 99% of cases made of different metal alloys. The top and bottom can be seen technological holes - are necessary for intake of cold and heated air supply.

Inside are located the most important "organs" - a heating element and a control unit (thermostat).

In modern heating devices found three variants of heating elements:

• A tubular electric heater (heater) - is represented in the form of a hollow tube, placed inside a spiral made of nichrome. Sometimes, for greater efficiency design equipped with special ribs. The advantages include the possibility of moisture. When this element emits extraneous sounds during operation and has a low efficiency.

• needle heater - it is a rectangular housing, which rows from two sides are attached wire components. Outwardly, their arrangement is similar to the needles of coniferous trees, hence the name. Despite the low cost and ease in regulating the optimal temperature, the heater is capable of doing such air too dry and is not suitable for wet locations.

• monolithic heater - in electric convector heater with thermostat can be most likely to meet this option. Their design presupposes a ribbed body forms a sealed therein with a thread of the previously mentioned alloy of nickel and chromium. Despite the high cost, monolithic elements without drawbacks of previous versions.

NOTE!(Click to see)

Thermostats (they thermostats) are used to control equipment and control of the required temperature in the room. This is the "brain" of the entire product, without which the maintenance of the microclimate in the house or apartment would be impossible.

Domestic and imported equipment manufacturers offer this embodiment two control units:

• mechanical thermostat - they are equipped with cheaper models. Outwardly, it appears in the form of rotary knobs, which the owner installs the necessary power and temperature control. When the heating element reaches the level required, the thermostat stops the operation of the device. At full cooling control unit again starts the heating. This version allows you to save the family budget, but it requires careful self-control, such as a thermostat is unable to take into account the current temperature in the room.

• Electronic control unit - unlike competitor electroconvector with thermostat of the type able to take into account as heating equipment, and ambient air temperature. The data obtained are treated with a special "iron" and make adjustments to the work of the convector. In addition to the manual setting, the owner can purchase a model with a remote control, which increases the ease of use several times. Also, such heating thermostat can regulate with precision until 0,10S.

NOTE!(Click to see)

Preferred specifications of electric heating with convectors thermostats

Choosing the optimal model, first of all, we draw your attention to the basic technical parameters - it is they who will determine the future efficiency of the heater in the house or apartment.

Power devices (heating area)

"Alpha and Omega" with the requirements of any customer. Do not consider this option - all the same, what to buy a Porsche for the transport of vegetables from the garden. For a reasonable choice is necessary to know the area or volume of the heated space of the future. Our editorial staff offers to get acquainted with the collected in one table optimum power options:

installation option

This parameter depends on the future location of the device. equipment manufacturers for heating offer several installation options:

• Convector, built into the floor- convenient offer for those who do not like to spoil the interior design of foreign objects, as well as secured layers of the population. After installation, the device is closed and a special grille does not stand out among the subjects. This option is quite cost, as well as relevant only during overhaul floors in the room.

• outdoor modification - a convenient option if you want to heat a number of different rooms. It has a high mobility due to four wheels in the base. In electric floor convectors and has one significant drawback - increased risk of tipping over (especially if you have small children or pets moving within the family).

• wall modification - "piece de resistance" and is the best option of all offered. Placed on the wall, due to which saves space in the room. When you install a window easily replaces the standard heating radiator. Electric wall heaters heating very efficient, they are suitable even for the garden or residential premises.

dimensions of equipment

This characteristic is closely related to the previous parameters. For a spacious room with a low constant temperature hardly compact heater is suitable. Recklessness will buy huge convector for heating a small room without the possibility of ventilation. Therefore it is always necessary to commensurate the size of the home and heating equipment.

Type of control

As we have noted previously, the manufacturers install in their creations either mechanical or electronic control unit. Giving preference to the first option, you save a considerable amount of money, but the ease of use and efficiency will be reduced. The second type has no such shortcomings, but it requires large investments in the first phase.

Additional functionality in electronic convectors

As with any advanced technology, our review of the hero has a number of special options that can greatly simplify the setup process, and not only. We offer a list of the most common extra features:

1. Custom modes - we all live in different natural and weather conditions, some need to maintain high temperatures, while others prefer to use only occasionally the convector. For such cases, and established pre-designed modes (for example, "economical").
2. Option to combat freezing - sometimes indoor air reaches a low unsuitable for life temperature values. For such rooms is better to choose the device with the "Antifreeze" function. Is lowered to a certain level of such a device will turn on automatically.

1. rollover sensor - in the event of an unexpected fall of equipment triggered a special element, stopping work convector. Save you and your family from a fire in any situation.
2. save settings function - when the owner puts certain values ​​of the heat mode, the device remembers these figures. When restarting will not need to rebuild the indexes again.
3. Integrated air ionizer - very nice and useful component for the ecology of fans and additional overpayment for everyone else. This element is designed to be added to the warmed air masses useful charged particles, making it more clean and healthy.

In some cases, the best use of electric heaters

In everyday practice, there are three basic situations where the use of such a device with regulators will be justified.

Residential room

If you have a cottage or have an area that you visit infrequently (for example, on the veranda or bathroom attic), it is safe to stop your choice on electric heaters, especially the wall version. Especially if you are lucky to buy a model with a programmable control - saves both money and time.

Unstable heating homes

In some apartments and houses heating utilities is carried out regularly. If you want to heat the room, and fully preserve the pleasant climate, the installation of the electric convector is a good solution.

regular operation

This method is rarely used. It requires an electronic programmable remote control. Otherwise, the cost of electricity will cost a pretty penny.

installation and security features by using electrical wall convectors

To install a wall modification of the product, you must first choose a location. The optimal solution would be the installation of a window - convection will prevent drafts and will prevent fogging of the glass.

Choosing the place, it is necessary to outline a four-point, subject to the following requirements: retreating at least eight centimeters from the floor, twelve centimeters - on the window sill and five centimeters - on the wall. Designating mark, take the drill or a hammer and makes a hole in the wall. We reach the supplied bracket and fasten it with the fasteners. Carefully place the unit on the bracket, connect to a power outlet and start to operate.

To avoid fire situations, you need to follow some simple rules:

1. Do not install in a room with high humidity convector without a special level of protection (indicated on the packaging and the device housing).
2. Do not cover equipment fabric and similar materials in the course of his work. This rule applies to all such vehicles.
3. The distance between the device and the receptacle must be at least eighty centimeters. Otherwise, the risk of fire is increased by several times.

What are the advantages and disadvantages of wall electric convector heating with thermostatic control

Before turning to the choice of the best models, it is necessary to place all available information "on the shelves", comparing the pros and cons of a choice.

[/ Modal]

NOTE!(Click to see)

Most manufacturers of electric convectors

The manufacture of such equipment is mainly a specialized company. And no wonder - specific components, high responsibility for safety and quality - all this imposes great limitations. We are introducing you to the company, proven best. Choosing their products, you increase the chance for the purchase of efficient and spectacular interior. However, be careful and cautious, because sometimes the price of wall electric convector thermostat may be set too high - it should not be cause for rejection of this category heaters.

USEFUL ADVICE!(Click to see)

Bonus! What is electric wall heating convector with thermostat is better to buy in 2019? TOP 5 + reviews

Sometimes even having a great store of knowledge, it is difficult to firmly take the right decision. Editorial Tehno. Guru understands this. So today we donate our personal top of the best devices in 2019. Let our opinion will be a "beacon" in the "Ocean" promotions and advertisements.

With a look editors agree and satisfied customers. Here are reviews of some of the presented electric wall-mounted convector heating with thermostatic control: