The best pumps for wells: Independent Top 6 - Tehno.guru

Exploit the well pump can not be without: the water itself does not rise, and draw her bucket impossible. The advantages of the well before the well is not necessary to describe. In addition to reducing labor and automating the process, with a greater depth than water is taken, the less reason to worry about its quality. Well with a properly chosen pump will provide delicious and clean water house and plot of all sizes. That pump provides water rise from the earth to the surface. However, the choice of the pump for the well - the event is not the easiest. To create a user-friendly stand-alone water system must take into account many factors: the depth of water, the performance characteristics of the equipment and so on. Let's examine in more detail how to choose a good pump for well, and what 6 pumps for wells can rightly be called the best.

How to choose the best pump for well

Pumps for wells require anywhere where there is a well drilling project. This and private homes, and villas and cottages, and suburban areas. So, what to look for when choosing a pump.

Design

There are several varieties of pumps, differing in the design:

1. surface: A pump located at the surface and absorbs water. This equipment is recommended for wells in which the distance to the water is less than 8 meters.
2. Submersible: The unit is immersed in water. This pump is suitable for the deepest wells. The system works on the principle of water ejection.
3. In-depth: Compact and very powerful pumps that can pump the water from very great depths. Well pumps for construction are divided into centrifugal and vibration. Vibratory centrifugal are cheaper, but have a lower capacity and long operation break down the borehole wall.

In addition, the pumps are available in three diameters of the body corresponding to the three standard sizes wells. Accordingly, once the design is necessary to see how well the pump is the best way it operated. For example, a four wells sale of pumping equipment is much more than a three-inch).

Performance

The pump capacity (or debit passport) should correspond well with water filling rate, otherwise the pump will run dry running, which will lead to its breakage. Just for this purpose, you can buy a cheap vortex pump. Calculate the rate of filling is easy:

• measure the source depth using strings with attached thereto a small weight (it is necessary to lower it to the bottom and measure the dry and wet part);
• measure the time for which the water is completely deflate;
• measure the time for which the well will be typed completely (check the same meter);
• split time 2 time 1 - this will be debit.

Power

The faster the water column is filled, the more powerful pump can be used. To calculate the required pump capacity, should take the rate of water per person (average) 1 cubic meter and multiply by the number of people living in the house.

Top 6 pumps for wells

Let's look at some pump models in different categories, which are leaders in consumer preferences.

The best vibration pumps for wells

Unipump Akvarobot 24-25 M in

The leaders of the domestic sales Unipump pumping station Akvarobot M 24-25 at a low price in 5400 rubles. This is a great pump to meet the needs of gardeners and owners of country houses. The maximum capacity of the unit - 245 watts, and performance - 1020 cubic meters per hour. water extraction depth - 40m dive depth - 3m.

Price: ₽ 5 390

Trickle-1

The second deserves a review unit - pump brook-1 at a price of 1500 rubles. Brook is suitable for pumping water from wells and out of the well, and out of the pool. At a head of 40 m pump 432 pumps LV hour. Maximum immersion depth may reach 60 m. With the upper water intake excluded rise from the bottom of pebbles and sand.

Price: ₽ 1 475

Top vortex pumps for wells

BELAMOS TM10-60

Pumping unit BELAMOS TM10-60 is inexpensive - only about 7 000 and has a light installation. It is most commonly used for water supply from wells, tanks, wells, water reservoirs for irrigation and water supply devices at home or villa. Performance of the unit - to 2400 l / h.

Price: ₽ 7 297

Vortex CH-100B

The second pump is in this category - Vortex submersible unit CH-100B power 1100Vt. This model is suitable for the needs of irrigation and for domestic water supply. Immersion depth 35m equipment and pressure permissible height - 120m.

Price: ₽ 6 480

Most centrifugal pumps for wells

HAMMER NAP600 / 39S

HAMMER NAP600 / 39S - downhole pump for very deep wells with depth fence to 45 m and a height of fluid rise - 39m. The pump pumps up to 3200 liters per hour. Since the water holes are arranged in the middle hull, you can be sure that the water does not fall from the bottom of the sand. In the pump there is a filter and thermal protection. The cost of such high-quality equipment - only 8300 rubles.

Price: ₽ 8 299

JEELEX water cannons PROF 110/110

The second representative of the ruler - JEELEX water cannons PROF 110/110. This unit will be able to raise the water to a height of 110m. Pump immersion depth of 30m. Water consumption - 6600 l / h. There is such a unique downhole pump with a high pressure of 20 000 rubles.

Price: ₽ 20 200

The comparative table of the best pumps for wells

FAQ

Borehole pump can pump water from the well?
Absolutely. Pivotally water from the well is stipulated in the instructions for use. The only condition for a long lifetime of the equipment: it should be fully submerged in water.

What pipes needed for borehole pump?
The best option pipes are products made from polivinilhlorila, polypropylene or plastic. They are easy to install, durable and does not release harmful substances in the water. To not particularly powerful pump used for irrigation, can be attached garden hose.