Overview of 12 types of best construction fen: how to choose the pros and cons

click fraud protection

Building dryer is similar to a conventional hair dryers that releases warm air. Only at times he is more powerful and is used during the repair and construction.

building dryer

It can help you:

  • produce synthetic finish wall;
  • remove the sticker;
  • shoot vinyl coating;
  • removing coatings containing lacquer or paint;
  • unstick carpet tile-based synthetics;
  • do shrink processing;
  • soften or melt the resin, solder, bitumen, waxes;
  • solder walled copper pipes;
  • create a form of plastic tubing and plastic;
  • PVC film is welded;
  • bend wood element;
  • get rid of air spots adhered films.

Content:

  • Design and construction work dryer
  • How to choose a construction hairdryer
  • Best rechargeable building hairdryers
  • Best building dryers for concrete
  • Best building dryers for soldering
  • Best building dryers for welding linoleum
  • Best building dryers for roof
  • Best building dryers for paint stripper
  • Best building dryers for welding PVC
  • Best building dryers for soundproofing
  • Best building dryers tinting
  • Best building mini-dryers
  • Best construction hairdryers with temperature controller
  • Best building dryer with display

Design and construction work dryer

Design and operation of the device

The structure includes a ceramic insulator, inside which there is a heating mechanism - air heating spiral.

The casing is inserted powerful electric motor, which blows warm air from the spiral to the outside and provides not only operability but also protection against overheating.

It works as follows:

  • when you turn the instrument to the network and run, turn on the heat of the spiral;
  • via motor sucked air passes through the coil and is blown;
  • depending on the power level of the spiral filament is regulated, and hence the heating of air.

How to choose a construction hairdryer

Recommendations regarding the selection of building dryer

To choose the right tool, you need to determine exactly where and for what purpose you will use it.

  • Building dryers are divided into two types: the professional and the consumer (the usual). In the first operational mode selection switches are available: minimum, medium and maximum.

But it is better to choose the devices where you can manually set the specific degree.

  • When you select should pay attention to protection against overheating. Function avoids tool breakage in the case of continuous operation.
  • The thermally protective cover will also be useful. Better if it will be high quality and removable.
  • It is necessary to pay attention to the handle, which can be of two types: open and closed. The second type provides better protection and easier to use.

Best rechargeable building hairdryers

Best battery construction hairdryer

This type of work often by a rechargeable lithium-ion batteries. Operating temperature in the region of 300-500 ° C. Output power is about 300 watts. Cordless hair dryer skips in a minute about a hundred liters of air.

It is adapted for home use and the implementation of short-term work in tight spaces.

Included with the device is a battery charger, a few tips and instructions.

Pros:

  • convenient to use in places where there is no sockets;
  • use in confined areas;
  • small size.
Best battery construction hairdryer

Minuses:

  • short-term use;
  • rapid deterioration of the battery;
  • difficult to find the right battery;
  • weak capacity.
Best battery construction hairdryer

Rating:

The cheapest battery hairdryer construction today is Steinel BHG 360 Li-Ion. It works from 12 volts in the temperature range of 400-500 degrees.

Better model - Einhell BHA 2000/1 with the same parameters. In third place is the Polar Division Zenit-2000-1.

Best building dryers for concrete

Best Construction Concrete hairdryer

Used to work with concrete, drying and removal of paint and varnish coatings. This type operates on 220 volts. Power consumption - about 1600 watts.

The minute passes about 550 liters of air.

Packaging consists of the instrument, a set of nozzles, as well as instructions.

Pros:

  • a lot of work;
  • fast heat of the heating mechanism;
  • execution of works related to concrete.
Best Construction Concrete hairdryer

Minuses:

  • large consumption of electricity;
  • inconvenient to use;
  • the need for sockets.

Rating:

The cheapest tool of this type is considered Vitals Tf 202JSc. Powered by a network, it has two temperature levels of 350 and 550 degrees. The next cost is Steinel HL 1610 S. And the third is a similar model Steinel HL 1910 E.

Best building dryers for soldering

Best Building dryer for soldering

In such models is temperature controller with fine adjustment, the air flow is directed without sputtering over the entire area. Work can be both from the battery and from the network. Operating temperature reaches 300 degrees.

Pros:

  • ease of soldering constructions from plastic;
  • infinitely adjustable thermostat;
  • accuracy in the air flow direction;
  • low electricity consumption.
Best Building dryer for soldering

Minuses:

  • small range of works;
  • low temperature.

Rating:

One of the least expensive of this kind of tools is FORTE HG 2000-2 with a capacity of 2 kW and a maximum temperature of 600 degrees.

The second price with the same characteristics of temperature and power is considered to Storm. Third place gets Energomash TS-20002 with a capacity of 2.5 kilowatts.

Best building dryers for welding linoleum

Best Building dryer for welding linoleum

Working temperatures range from 100 to 650 ° C. Tools consume half a kilowatt, which is pretty much. There are models and 4 kW, which are considered professional. Options standard.

Pros:

  • High-temperature heating;
  • long duration of the work;
  • large spray area;
  • large selection of attachments for welding.
  • ease of accurate work.
Best Building dryer for welding linoleum

Minuses:

  • a large power consumption;
  • not suitable for fine work.

Rating:

The most affordable tool - Belarusmash 2200. In second place is Russia in 2500, he and a bit more powerful, but also more expensive. Third place goes to URALMASH BT2500.

Best building dryers for roof

Best Building dryer roof

It characterized by specific attachments that allow you to improve the quality of the roof. It has from 2 to 5 temperature regimes. Power consumption is 1600 watts, operating from the mains.

Pros:

  • little electricity consumption;
  • three temperature regime;
  • fully functional for the roof of the start of work until the end.
Best Building dryer roof

Minuses:

  • short duration of continuous operation;
  • not suitable for other types of work;
  • lack of a smooth change of operating temperatures.

Rating:

One of the cheapest representatives of this type is Intertool DT-2416 with a capacity of 1500 kW and a temperature of 300 degrees. In the second place with the same parameters is Vitals Tf 202JSc. Third place went to Metabo H 16-500.

Best building dryers for paint stripper

Best Building dryer for paint stripper

This tool is the most simple and without any special custom elements. there are two types of nozzles for removing paint coatings.

The temperature of the blown air is 100-300 degrees. Power consumption of these devices reaches up to 1500 kW per hour.

Pros:

  • perform fast and high-quality works to remove paint coatings;
  • possibility of drying material;
  • low power consumption.
Best Building dryer for paint stripper

Minuses:

  • a small feature set;
  • It requires additional protection when working with paints.

Rating:

The cheapest model of this type on the shelves - Steinel HL 1400 S, power of 1500 kW and a temperature of 300 degrees. The second cheapness Steinel HL 1610 is S. And the third place is occupied by Bosch PHG 500-2.

Best building dryers for welding PVC

Best Building dryer for welding PVC

Building this type of hair differs a wide temperature range with fine adjustment. The power of this building tool comes up to 4 kilowatts per hour. The tool kit is a guide and a set of nozzles for welding and other work.

Pros:

  • multifunctionality;
  • infinitely adjustable outlet air temperature;
  • large set of nozzles for different types of activities.
Best Building dryer for welding PVC

Minuses:

  • high electricity consumption;
  • short-term work.

Rating:

In the ranking of the cheapest ranks first Craft CHG 2200E capacity of 2.2 kW and a top temperature of 550 degrees. In second place is Intertool DT-2420, and the third - Craft CHG 2000.

Best building dryers for soundproofing

Best Building dryer for soundproofing

This type of construction is characterized by high accuracy dryers work and smooth temperature regulation. Power consumption - 1 kWh.

Pros:

  • stepless adjustment of the air temperature;
  • the accuracy of the air supply;
  • low electricity consumption.
Best Building dryer for soundproofing

Minuses:

  • used for a small number of side activities;
  • limited set of nozzles.

Rating:

Rating fen cheap building this model begins Arsenal P-2000E. In second place is the Dnipro-M ETUF-2005D, third place went to AEG HG600VK.

Best building dryers tinting

Best Building dryer tinting

Tools of this kind are comfortable to use and reliable. Have a small power consumption and a set of nozzles for smaller jobs.

Pros:

  • large number of quality nozzles;
  • low power consumption;
  • fine tuning the blown air temperature.
Best Building dryer tinting

Minuses:

  • not suitable for large-scale works;
  • difficult to find the battery for replacement;
  • short-term work, in order to avoid damage and overheating.

Rating:

One of the cheaper models - HL 1400 S. Next - Steinel HL 1810 S. In third place Makita HG651CK.

Best building mini-dryers

Best building a mini-hair dryer

Mini hairdryers remarkable because of their convenient and reliable. Designed for small and short-term work. Cordless models operate in the temperature range up to 300 ° C.

Pros:

  • comfort of use;
  • ease of transportation;
  • small size.
Best building a mini-hair dryer

Minuses:

  • small volume of work performed;
  • little functionality;
  • constant charging;
  • difficult to find a replacement battery.

Rating:

Is the budget model - Intertool DT-2416. Second place goes to Intertool WT-1020 and third - Craft CHG 2200E.

Best construction hairdryers with temperature controller

Best building dryer with a temperature controller

Hair dryers of this type are considered to be professional. They have a lot of functionality - from dry materials to work with concrete and welding of plastic materials. Along with them comes a large set of nozzles. Operating temperature range from 100 to 700 ° C.

Pros:

  • a simple heat adjustment mechanism;
  • high quality of work;
  • debugged heat the feed mechanism;
  • adjustable handle for comfortable operation.
Best building dryer with a temperature controller

Minuses:

  • Inflated price for the product.

Rating:

The cheapest of the regulated construction fen is DWT HLP16-500, a little more expensive Proton FT-2000/2, in third place - PowerPlus POW707.

Best building dryer with display

Best Building dryer display

With the help of the display shows the temperature data and performance. You can select a function, and it will automatically set the desired temperature and power. This type is suitable for professionals who often work with these tools.

Pros:

  • convenience in configuring the operating mode;
  • the accuracy of the temperature setting.
Best Building dryer display

Minuses:

  • screens often break at work
  • it is difficult to find a part or a display for the replacement and repair.

Rating:

In the first place Sturm HG2003LCD to 2 kW, and the temperature is adjusted from 50 to 600 degrees. In second place - hairdryer Japanese manufacturer Ryobi EHG2020LCD. The third place is occupied by the building firm Bosch dryer Model GHG 660 LCD.

The most popular rechargeable hair dryers. They are bought for personal use at home. Such stir-founded low cost.

In second place are the construction of mini-dryers - the third semi-continuously adjusting the temperature regimes. The most wide-considered building dryer with display and temperature continuously adjustable.

Second in terms of functionality - it dryers concrete. They have high temperature limit, with a suitable attachment they are suitable for any type of work. In third place are the building dryers for soldering.