Overview 8 species best glue guns: how to choose the pros and cons, the rating

Glue guns are suitable for bonding paper, rubber, wood, plastics, ceramics, glass, textiles and metal.

The device and principle of operation

The appearance of the device resembles a weapon - this form is convenient to use. The device is equipped with an aperture for adhesive cartridges. It's a long translucent rod, filled with glue.

It heats thermal unit which fuses the glue. By pressing the trigger is pressed a small amount of the adhesive mass. After a few minutes the adhesive hardens completely, and the surface is securely fastened.

The diameter of the rods ranges from 7 to 11 mm.

Before the first use of the instrument is warming up for 3-5 minutes. Molding chute alloy ejected onto the surface.

heating the assembly

Heating of the heat chamber is made Tan, which is located at the bottom of the device. Some models are equipped with multiple heating elements. The larger chamber and PETN power, the higher the performance of the gun.

feeder

Presented annular pusher operating on the lever, which is coupled with the trigger. When excessive pressure occurs damage designs.

Resistant guide sleeve

The task of this part - preventing the heated adhesive falling back into the device. Sometimes the clutch can not cope with his appointment as a member of the rubber that cracks over time.

Hot melt strikes the inner part of the instrument, they fail. In the worst case a short circuit occurs. Often when replacing damaged rod sleeve, so it's worth carefully insert and remove the cartridge.

Nozzle adhesive attaches form dispenses melt stream overlaps the effluent stream. There is a check valve that prevents the leakage of the alloy. But the hole does not overlap completely, to relieve the pressure when heated.

How to choose the glue gun

important parameters

• Working temperature. Index ranges from 100 to 200 degrees. Parameter affects the glue heating rate.
• Food. Typically, the device operates from a network that restricts the workplace. Much more convenient to use the device with a detachable wire that is charged on the stand.

• The diameter of the rod. Choose the option you want to be depending on the type of work performed. The diameter of 7 mm is suitable for a periodic application. Repair work with large surfaces require a diameter of 11 mm.
• Equipment trigger. The most common devices are equipped with this piece, because that promote stem hand uncomfortable. Kurki divided into two types: rotary and slide.
• Switchable temperature. If the degrees of heating are regulated, the gun is used for different materials.

Some models have a switch from the minimum to the maximum mode. More advanced models feature a smooth control.

• Power. This value affects the performance. Lovers have enough power of 30-150 watts. Professional tool reaches values ​​of up to 300 watts.

secondary options

• A special indicator. It indicates that the device is ready for use.
• Flashlight. Recessed lighting gives comfort when working with the tool.
• Performance. The parameter depends on the rate of heating a certain amount of glue. The range is from 5 to 30 grams per minute. Low speed for fine works. Large-scale action or repair will require higher rates.
• Off button. If the gun is not equipped with automatic temperature control, during the break, it is necessary to switch off from the mains. With this button the need disappears.

• Additional nozzle. Some models are equipped with packings, which facilitates the bonding process: narrow - hard to reach places, wide - large areas.
• Viewing window. Transparent hole notifies adhesive residue in the rod.
• Protection against drops. Inside the tool built a small ball, which prevents the free outflow of the substance.

Purpose and functions

The sole purpose glue gun - gluing the two surfaces. But applications are quite diverse. The tool used by designers, florists, designers, radio amateurs, engineers.

The product is widely used in the construction and assembly work. The device helps to correct minor problems at home: to glue the broken vase, a broken toy, strap on the furniture, to detach the sole.

The most common materials are considered to be wood, ceramic, plastic.

The best glue guns for needlework

Rating:

• SteinelGLUEMATIC 3002 - universal device. Glues, natural and synthetic materials. Perfect for decorating gifts. Weight 320 grams and temperature control makes the product comfortable.
• DEFORTDGG-16N- the easiest. Product weight only 120 grams. Designed for needlework. The advantages of the device is its low price, long life, low temperature control for delicate work.
• SPECIAL BOD-60 - the most affordable. The low cost of the product makes it popular. The device quickly glues a variety of surfaces. Metal staple holding unit in the vertical position. Tool weight is 200 grams.

Device for creative works characterized by the following features: exact dosage of the adhesive, the ability to control the amount of substance in adhering small or fragile items.

Characteristics

• Power 45-200 watts.
• Performance 8-16 grams / minute.
• Temperature control.
• Mains.
• The heating time is 7-10 minutes.
• Temperature 60-200 degrees.

pros

• High performance.
• Easy to use.
• Fast glue supply.

Minuses

• Plug sometimes misses glue.

The best glue guns with interchangeable nozzles

Reytting:

• glue gun HAMMERGN- 06 - the most secure. Device meets all the technical requirements needed to work on massive objects. The advantage of the model is to work both on the network and from the battery.
• DEFORTDGG-50N–K- creativity. The device adheres fabric, cardboard, paper, wood, ceramics. Removable metal tip very useful in dealing with construction materials.
• BOSCHGKP 200 CEProfessional–overcomes difficult places. Options include an elongated nozzle, which gives you access to narrow spaces.

Expand the scope of the Nozzles. They change the diameter of the jet of adhesive.

Characteristics

• Power 35-500 watts.
• The heating temperature is 200 degrees.
• Performance 15-30 grams / minute.
• The heating time of 2-4 minutes.

pros

• Convenient stand.
• Work when disconnected from the network.
• Versatility.

Minuses

• Cost increases.

With the help of a gun filled and sealed seams are located in remote places of the crack. The features of the device is considered to be a built-in stabilizer to maintain a constant operating temperature and electronic control.

Most cordless glue guns

Rating:

• BoschGluePen 0.603.2A2,020 - the most compact. The device is equipped with a USB-connector, through which the product is easy to be charged. Battery time is half an hour. Heating time 15 minutes.
• ENGYEGG-16CL- multifunctional. The gun comes with two nozzles and runs from the charger. Built collection collects drops. The product works with metal, plastic and rubber.
• MILWAUKEEC18 PCG/ 310C - the most powerful. A feature is a high performance at low temperatures. The feed rate of the alloy is controlled depending on the requirements.

Models running on battery power, make the glue machine mobile and efficient.

Characteristics

• Power of 5 watts.
• Battery.
• Protection against drops.
• The diameter of the rod 7 mm.

pros

• High mobility.
• Equipment stand.
• Ergonomic trigger.

Minuses

• Require regular charging.
• A lot of weight.

The best glue guns paste

Rating:

• Dremel 910 F.013.091.0JC- the easiest. Glue gun weighs 140 grams, which makes the process simple, and the hand will not get tired at gluing a large number of crystals.
• STEINELNEO1 334109 - the most accurate. The device design is especially designed for spot work.
• KolnerKGG - the fittest. The device is intended to operate with uneven surfaces.

An apparatus for bonding paste must have special characteristics because it is a long process and requires a small dosage drops.

Characteristics

• 5-5,4 Watt power.
• The temperature of 165 degrees.
• Power - network.
• The heating time is 5 minutes.

pros

• Compact size.
• A light weight.
• Easy to use.

Minuses

• Limited application.
• There is no temperature control.

The best glue guns for the paper

Rating:

• Dremel 930-18 HOBBY- multifunctional. The device is intended for decorating, scrapbooking. Low-temperature adhesive mode is suitable for working with soft materials such as organza or paper.

• FIT 14330 - the easiest. Tool weight 100 grams. The compact machine is ideal for working with paper. This contributes to a diameter of 7 mm and temperatures of 150-200 degrees.
• UHU “LT 110 XL"- the most sensitive. Device supports operation at low temperatures, so it is safe for delicate surfaces.

Devices gluing paper, operate at low temperatures. Narrow bars or nozzles help in this.

Characteristics

• Power 60 Watts.
• The diameter of the rod - 7 mm.
• Glue consumption - 5 g / min.

pros

• A light weight.
• Compact size.
• Soft trigger.
• Accurate tip.

Minuses

• Not suitable for use with solid objects.

Best professional glue guns

Rating:

• ProfessionalINTERTOOLRT-1012 – highest performance. At the moment the gun produces 30 grams of the substance. This is useful when applied to a large area of ​​adhesive to melt is not cooled, the bonding surfaces are held tightly.
• STANLEYFatMax- rapid heating. The device is ready for use after 60 seconds. The temperature is indicated by LEDs: green indicates heating above 170 degrees, red - below.

Power is maintained even when the adhesive supply. Safe shutdown function independently disable the device after 30 minutes of operation.

• BuhnenHB 190 - the easiest. The device weighs 300 grams, so to use it comfortably. Handle - narrow profile. The gun has a high performance, 12 mm rod convenient trigger.

Products are used not only at home but also for the professional works in manufacturing. They are suitable for leather, wood, fabric. Widely used in furniture factories for processing joints.

Characteristics

• Power - 80-180 watts.
• Mains.
• Automatic shut-off.

pros

• Big performance.
• The exact dosage of glue.
• Switch on the body.
• Bonds any material.

Minuses

• High price.

Top pneumatic glue guns

Rating:

• BuhnenHB 700 KSpray- the most accurate. The device is intended for industrial applications. Gun inflicts polyurethane adhesive in the form of a spray.

The machine has an automatic heating control, which controls the temperature to within 1 degree. The handle has a digital display.

• 3MPolygunII- a multi-purpose tool. The apparatus is characterized by a large range of temperatures, so any hot-melt adhesive is applied. Pneumatic high powered gun melt strip length of 4.8 m. The device weighs 860 grams.
• METABOPowerMaxxKP - practical. It is intended for processing viscous products even due to the contact pressure. The device is protected from stains due to the automatic retraction of the rack. Metal gear extends the service life.

A feature of the design is considered pneumatic system glue supply, which has a high pressure. Therefore, the gun handle with stringy, viscous substances.

Characteristics

• Performance of 10-30 grams per minute.
• The volume of 600 ml.
• Battery.

pros

• High power.
• Convenient adhesive supply system.
• Holds massive objects of different textures.
• Compact and lightweight.

Minuses

• The massive size.

The best glue guns with adjustable temperature

Rating:

• MetaboKE 3000 618121000 - thoughtful. Gun is equipped with electronic temperature control. Therefore, glue wood, cardboard, fabric, cork, leather.
• KRAFTOOL 6840 - elegant. Stylish design makes the device a fashionable and modern.
• CALIBER TCH-30 - rapid bonding. The device design makes use of efficient and reliable. The temperature is adjusted from 150 to 190 degrees.

Devices used in everyday life and professional life.

Characteristics

• Power 200 Watt.
• 11 mm diameter rod.
• Power - network.
• The temperature of 200 degrees

pros

• Universal Instruments.
• Compact, comfortable.
• A large assortment.

Minuses

• Narrow application.

Glue gun is useful in every home, especially it will be useful to fans of needlework. With it easy and simple to solve many problems.