How to clean a pipe in the bathroom at home: useful tips

Blockage is one of the most private and unpleasant problems in the home. You can know exactly how to eliminate clogging in the bathroom or other rooms, to make constant prevention. But at one "perfect" moment something gets into the sink, and the water remains in the sink. Even worse, if you find a clog on the unpleasant smell of water. This means that he ate deep and long ago accumulated somewhere in the depths of the pipes.

Causes of clogging.

• Incorrect care or lack thereof. If the sewerage is clogged, you forgot about leaving. Your pipes require attention, because in them, in any case, little by little accumulates sand, fat. If you do not do preventive maintenance of a blockage every few months, it will soon appear, and it will be very difficult to cope with it.
• Fat, which gets into the pipe, reduces the free space where water can flow. If a layer of dirt, grease and sand is large, even a small pebble can block the water and lead to an unpleasant blockage.
• The blockage in the bathroom can be caused by the long term use of pipes. All, even the most qualitative, with age, begin to work worse, to loosen up, inside of them appear outgrowths.
• The most unpleasant, if the builders laid the pipes wrong from the very beginning. If the slope of the pipe is insufficient, the clogs will appear constantly. The only way to stop this is to replace the sewage system.
• The cause may be pipe material. If it is made of cast iron, clogs will appear more often. The features of this metal are such that deposits on its walls appear faster. Plastic pipes will not be saved from blockages, but there will be a little less trouble.
• And the most common reason is that in chemistry is called the "human factor".Even the cleanest pipes will be hammered if a rag, rubbish or kitchen waste gets into the drain.

Determination of clogging. Cleaning with soda and vinegar

Most often, pipes become clogged in the summer. At this time, people are much more likely to use water and can, without thinking, throw in the drain cleaning. If there is an unpleasant smell near the drain, this is the first sign of clogging. The most reliable is the rate of water runoff. If it has decreased only a little, the problem can be small and the pipe can be easily cleaned, but the puddle in the sink says that it will be necessary to suffer. If the water begins to return through the drain and while it is dirty, has a sharp smell, we must urgently begin to act.

A good remedy is to use soda and vinegar to clean the sink and clean the blockage. It is necessary to take one glass of these substances. The soda of the first is poured into the pipe, right after it goes vinegar. Since the components are acid and alkali, they will immediately react. After this, it is advised to close the drain with a cork or a rag and leave it for a few hours. After it is necessary to wash the pipe with hot water - and there was no clogging. If you are wondering what you can protect your hands, take any thick gloves that sell in supermarkets.

Cleaning with boiling water

However, boiling water can help by itself. The reason for its usefulness is that most of the obstructions consist of fat. If it is melt, there will be no problem. Heat 3-4 liters of hot water( preferably not in an electric kettle) and pour it into the sink. The result will be even more likely if using mechanical means like a plunger or a ruff with boiling water.

Advice

Boiling water in a pipe is better not to pour if water is not washed away. Then he just does not get to the problem place. It is also important to be careful when using a plunger. The skin may get splashed with hot water.

Mechanical tools

If the pipe is clogged and you do not know what to do, pick up the good old ruff, which will help at home solve the problem with the pipes. Useful will be and wire, plunger or cable-plumbing. Ruff will be useful if clog has appeared shallowly. Remove the grate and open the sink. Take the ruff and shove it into the pipe. Sharp movements back and forth try to break through the blockage. If it is a bit deeper, a flexible metal rod will help you. Attach it to the handle of the device and try to push it deeper.

The answer to the question of how to clear the blockage in the bathroom has become a regular air-flap for decades. In order not to break pipes when using them, you must pre-plug the sink and wait for some water to accumulate. Wait until the water covers the rubber part, and only then open the drain again and press the hemisphere of the plunger into it.10-20 times push water inside the pipe. It can press through the blockage.

The cable is very convenient in that it can penetrate the meters into the depth of the pipe. Especially convenient if a drum is attached to it. Then you can slowly push the cable into the pipe, rotating it. It may take time, but it will definitely bring the result.

Chemicals

How to clean the blockage in the bathroom without special tools? I'll have to use a chemical. It quickly corrodes dirt and fat and for several hours. The same "Mole" is quite inexpensive, and one bottle can last for a year of cleaning. The only, but unpleasant drawback of such compounds is the harmfulness to health and pipes. If you use chemistry too often, it corrodes not only the deposits, but also the metal itself. With this, nothing can be done, but if the pipe is clogged over, then once you can use a chemical. But the masters advise not to use it too often.

To break the blockage, just fill in a sufficient amount of the product in the sink and wait a few hours.

Prevention

In order not to suffer with an unpleasant odor and not to wipe away chemicals from your hands, it is better to think about prevention. Every 2-3 months you need to pour a few liters of boiling water into the sink, you can with soda or vinegar. And then at home you can cope with any problem, and the pipes do not have to be changed too quickly.