Fan Overview ERA PRO 6: features, specifications, reviews

Fan The era of pro-6 copes with all the problems of high humidity and odors.

Overview

It has a channel type of installation, operation and axial system.

It is used for continuous and temporary ventilation of premises: kitchens, bathrooms, toilets and other. The device operates in a mode hoodAs well as the ventilation flow.

Installation is made in a duct or duct suitable diameters. instrument mounting system allows you to install and remove it without disassembling the entire duct.

The housing is made of high-grade plastic. The blades of the impeller are made of durable material and create air flow.

The fan is equipped with fuses that protect the appliance and wiring short-circuit.

functions

• Model Pro-6 is produced with a degree of protection IP X4 - is provided with a splash guard and is suitable for working in environments with high humidity.
• Air exchange (productivity) - 320 cubic meters per hour. This is the maximum air exchange produced by a fan for 1 hour. This unit will blow air in a room up to 42 sq.m. or in the kitchen 10 - 12 sq.m.
• pressure limit reaches 65 Pa, which creates thrust for the passage of air through the ventilation duct and the duct.
• The device works quite quiet. The noise level does not exceed 36 dB, it can be used not only during the day but also at night.

Characteristics

• The mechanism of operation - axial. This motor having a rotating paddle wheel and generating a continuous stream of air.
• The apparatus has a channel type fixing. It has a significant level of ventilation, in a small package.

Installed in the duct network or ventilation shafts: in the walls or ceiling. It must be remembered that choosing the channel device, it is necessary to take into account the shape and size of the duct.

• Power - 22 watts. The larger the fan power, the higher the speed of the air flow created by them. An apparatus with a power of 22 watts has a high blowing power and is much more effective to cope with the task.
• The diameter of the device - 16.3 cm.
• Productivity - 320 cubic meters / hour.

How do I know the fan how much power do you need? To do this, you need to calculate the volume of the room. It will be equal to the floor area multiplied by the height from floor to ceiling.

To obtain accurate results, it is possible to deduct from the amount of space the approximate amount of furniture.

For example, for the calculation must be multiplied by the required power unit for the bedroom or nursery, its volume is 3, and the choice of instrument for the kitchen - 10. PRO-6 allows you to maintain a dwelling up to 42 sq.m. or kitchen up to 10 - 12 sq.m.

• Air pressure of 65 Pa.
• The noise level about 36 dB.
• Weight: 500 g 9 kg.
• Dimensions: 19.8 cm width, 17.9 cm height, 15.4 cm depth.
• The diameter of the inlet channel - 16 cm.
• The body is made of plastic. This is an easy, inexpensive, and therefore the most popular material.
• The degree of protection device against dust and water - IP X4. This means that the model is protected against moisture and splashing, but is not protected against ingress of larger dust particles.

This ventilation device is suitable for placement in the bathroom and in the kitchen. If water in the body, the mechanism is protected and will not fail.

• The device is powered by a 220 - 240 V.
• Input current 0.1 A.
• The maximum temperature for the operation - 400 S.

Fan Era Pro 6 can be combined with plastic air duct Era systems if necessary.

A special fastening system that allows installation and removal of the device, without disassembling the entire duct. This advantage of the fan Pro-6 to other models the channel of fans present in the market.

Fasteners are included, so there's no need to worry about purchasing additional details.

The fans are mounted indoors. To improve performance, you must have access to service devices. Attach ventilation devices need as high as possible from the floor up to 2.3 m.

The closer the fan to the steam source and the smells, the more effective will be his work. It should also be borne in mind that the device was far enough away from the person receiving bath or showerAvoid touching and electric shock.

Effectively fans installed opposite the main air supply sources and a minimum distance of 3 cm from the corner between the wall and the ceiling.

Equipment

• fan,
• mounting kit,
• instruction.

accessories

• Plastic air ducts,
• ducts ERA,
• shaped parts for ventilation systems to help hide the seams and irregularities in the design of ventilation holes,
• diffuser or diffuser for regulating the air flow direction,
• Series accessories Street Line will bring the fan on the street for ventilation system device,
• plastic clamp tie HRP
• worm clamps in 190-210, 110-130,90-110, 140-160, 70-90, 120-140,
• One key switch is set to turn on the fan convenience.

dignity

• power of 22 watts makes the instrument more effective,
• 320 cc of air exchange. m / hour by blowing cope with a large area, is suitable for heavily smoky rooms,
• low noise level of - 36 dB,
• the degree of protection IP X4 allows moisture to prevent a short circuit in high humidity.

disadvantages

• no remote control for remote control,
• no display,
• the lack of rotation of the fan function and tilt,
• the absence of a timer,
• no Wi-Fi and Bluetooth control.
• the degree of protection IP X4 dust moisture does not involve use of the device in areas where Repair is carried out. Large dust particles may damage it.

Reviews

ERA PRO-6 to perform its functions at 100%. Useful in the bathroom. Successfully fighting with high humidity, which is often the cause of mold.

The device for a few minutes eliminates the smell of tobacco. In most cases installed in the bathroom and kitchen, and helps with poorly functioning ventilation.

Lack of e-governance does not bother the owners. The priority for them is the capacity and durability of the device.

Difficulties may arise during installation, so it is better to trust in the master. Alternatively accurately calculate the diameter of the inlet opening to avoid mismatch with the device turned diameter.