Kettle for gas cookers

Depending on the type of teapot, its service life will be significantly different.

CONTENT

  • 1 What is special kettles for gas cookers: why they are still popular
  • 2 What structure should have the right kettle for gas?
  • 3 The design and scope of the kettle: the right balance
  • 4 Material: how it affects the strength of the kettle for gas cookers
  • 5 What a kettle for gas cooker buy: review of models and recommendations Tehno.guru edition
  • 6 Ranking of the best teapots Gas cooker: 4 popular models with prices
  • 7 Which model to buy naplitnogo kettle: Tips Tehno.guru edition

What is special kettles for gas cookers: why they are still popular

It is well known that the process of boiling water for tea and other hot drinks in the kettle is faster, and even if it is made by the old technology, price it in your home will be. The only requirement for modern models, which replaced the samovars -proper care.

Naplitnye kettles are more long-life and enhanced functionality. After all, this dish can be warmed not only water, but also brines and syrups in zakatok season, after which, of course, kitchen appliance necessarily require cleaning.

Best of all, if the new kettle you will only use purified water. This saves him from the imminent formation of scale on the inner walls.

Usually people buy teapots gas cookers with sufficient volume. This is relevant when the family is big and always require a lot of boiling water prepared. Such opportunities are not adapted electric kettles, because due to the ergonomic and attractive appearance of the user has to give preference to models with capacity of 1.5-2 liters.

What structure should have the right kettle for gas?

No wonder that to naplitnym teapots have special requirements. They should be made of a special alloy, does not rust and does not emit any substances. In other words, to be absolutely safe for health. Let us consider how to be arranged, in our opinion, the best cooking heater.

If the handle is located above the filling opening of the kettle, without tack, you will not do.

  1. The bottom and the filling port should vary in diameter. The wider the bottom, the quicker will be the heating of the water in the kettle, with an opening for loading must not be too narrow. The ideal ratio of 1: 2.
  2. cover structure in a safe teapot should have a valve that does not allow it to slip while filling the cups of water. Ideally, if there is an opening with a rubber gasket for steam to escape.
  3. Centrally located on the teapot spout - ideal. Through him, the water will pour out evenly without impurities scale and debris. Best of all, if the base of the spout inside the kettle is an additional filter.
  4. Handle type must be a silicone or made of bakelite (heat-resistant plastic). Such a device will not slip out of hands and at the same time burn the palm. In this case the holder must be placed on the side of the enclosure as the tea Turk.
  5. The presence of a whistle - it is an important attribute, especially for large apartments, where in the back room, you can just forget about the fact that the kettle is switched on. Since boiling it notifies the host high-pitched whistle. If you liked the model with a removable whistle, it would be good if it was equipped with a plastic handle.

HELPFUL INFORMATION!(Click to see)

HELPFUL INFORMATION!

Inflated or other type of kettle body plays no role in the rate of heating water. Opinion on the fast boiling water in a kettle with flattened sides -oshibochno. This process does not depend on the form, most of the material.

Poor quality and cheap kettle can be equipped with ventilated caps, spill the water is a risk of scalding.

The design and scope of the kettle: the right balance

On the exterior of the kettle you should pay attention when your kitchen already furnished and simple homely kitchen appliance will be out of place. Here it is necessary to pay attention not only on the color scheme, but also on the particular case: round or oval version. In color it can match the kitchen decor.

The volume pot for a family of two people must be no more than 1.5 liters, even if it is often warm. But in homes where family size is three or more, it is better to buy two-, three-liter variant.

Gas kettle heats water twice longer electrical, but four times more economical.

Material: how it affects the strength of the kettle for gas cookers

All pots used for heating water by means of gas stoves can be divided into types of raw materials from which they are made. There are popular enameled with a spectacular design, and there are glass, requiring careful use. Let's go through more types of material.

Many stainless steel kettles are made in conjunction with a durable plastic.

  1. enamelled teapots. These devices are well proven for a long time use. They are quite durable, but require careful cleaning. If use low quality water, the layers of sludge will be formed inside the kettle.
  2. Cast iron kitchen appliances pretty hefty, but strong. Water heating accounts for too long to wait, but after boiling a kettle fine retains heat.
  3. Stainless Steel utensils is quite decent, so it does not require any special care procedures. Stainless steel is suitable for heating purified and plain tap water. This kettle is always lighter than their "brothers", which means that during the manipulation arm does not get tired to hold the instrument.
  4. ceramic teapots made of clay, and then covered with a special thermal varnish. This heater is suitable only for those who are used to carefully apply to things. The slightest shock or chipping will damage the integrity of the coating.
  5. glass version strong enough, but not durable, as can be seriously affected by sudden changes in temperature, it does not oxidize water, despite the aluminum insert on the bottom.
  6. aluminum kettles gradually going out of fashion. They are good in that absolutely no maintenance, however, upon contact with water to form an acid reaction which is harmful to health.

On kettles made of stainless steel, can form a white coating on the low-quality water. It needs to be washed off, the kettle did not burn through.

It is not necessary to choose the kettle for gas cooker only on the basis of the manufacture of the material. For example, for the rapid heating of water is better to buy a model with thin walls and a thick bottom - it Stainless steel kettles, but for long-term maintenance of heat is better to use iron heaters.

What a kettle for gas cooker buy: review of models and recommendations Tehno.guru edition

From the device for heating the material, much depends. If you buy a model of good quality, it will serve you for decades. But that all came together in this way, we are sure to select one of the models in our review.

Qualitative Stainless steel kettle for gas cookers - Mayer & Boch

After using detergents, rinse tea makers need to remnants of the foam and the divorce does not burn.

Colorful teapot with a floral design suitable for any kitchen where all equip female hands. Such a thing in the kitchen is bound to attract the attention of visitors and cause them a surprise.

L.Material typetype of floortype of handleThe outer coating
3,5Carbon steelinductionbakeliteenamelled

Review Mayer & Boch models

More on Otzovik: https://otzovik.com/review_2277868.html

Kettle Metalac - universal for different types of plates

An interesting device design with antique rustic motif. Decorate the kitchen the hosts in the villages, or those who support the national traditions. Material stainless steel, but in a qualitatively furnish that will maintain the integrity of the device for a long time.

L.type of handleThe presence of the whistleProfessionally DecoratedCompatibility
2,5BakeliteYes / removablethere isInduction cooker; gas stove; electric stove.

A great option device that is easy to use, however, it requires a minimum of care. Enough wash sponge in soapy water.

Granchio Cosmico Rosso Bollitore - enamel and very bright

Handle Bakelite will not allow the kettle to slip at the crucial moment.

This device is undoubtedly will be the most attractive dishes in your kitchen, it is possible, even the heart of this cozy room. Such an option would be completely harmless to health, besides it is quite easy to clean and use. With the shrill sound of a whistle built on the nose you will never forget that they were going to drink tea.

LWhistletype of productmaterial handleCap
2,5there isenamelled Carbon SteelBakeliteRemovable, metal sealed.

The surface of the model of the kettle is made smooth, it does not absorb odors and perfectly clean.

Ranking of the best teapots Gas cooker: 4 popular models with prices

Gas, electric and induction hobs are distinguished from each other on the principle of action, nevertheless has kettles, suitable for each of these techniques. But the really worthy to be in your kitchen will be a model of the ranking prepared by the editors Tehno.guru.

4th VITROSS - economical naplitny whistling kettle

With naplitnym kettle you will appreciate all the advantages of aromatic hot drinks.

The device has a loud whistle and a sufficient amount of water set. The three-liter appliance will help arrange a comfortable tea party a big company guests. Enamelled outer coating does not cause difficulties in care. The inner heater housing is made of steel, which increases strength properties. The average price per unit 2,500 rubles.

3rd Elite kettle for gas cooker manufacturer from Germany country - ALESSI MAMI SG65

Germany produces some of the high-quality cutlery, so there is a reason to buy equipment of the country of origin.

A great option for light touch kitchens with classic design solution. In appearance, the instrument with heatproof silver handle and built-in whistle. This model is characterized by quality and reliability. The volume of the heater is small, only 1.5 liter, but it rapidly heats water on a gas stove. The lid sits firmly in the filler opening: do not slip during use. Approximate value of 4000 rubles.

Rank 2 Kettle for gas cookers Tefal C7921014 (Tefal) - durable and resistant

On kettles made of stainless steel are often stained by spilled water, so it is better to clean.

The body of naplitnogo kettle made of stainless steel is sure to please its owners fast heating. The presence sverhzvonkogo whistle will allow to hear when the water will be ready for hot drinks. Despite the tightness of the closure cap, it is quite easy to open due to the convenient plastic lever. True volume insignificant, only 2.5 liter, but this is enough to simultaneously heat the water to a small family. Estimated price for the model is 3000 rubles.

Rank 1 Maker "Zepter" for gas cookers with a removable convenient whistle

Before first use, be sure to rinse the tea, and it is better to boil.

The unique design of the kettle will not leave indifferent any hostess. It attracts attention with its magnificent shine and stand out clearly beige handle of excellent heat-resistant plastic. He has a small weight, so easily and quickly making tea and coffee. Tea has a strong inductive bottom and wherein the spout for ease of pouring water. The average price of the current year 2500 rubles.

Shiny and elegant kitchen appliance requires constant care to longer retain its appeal.

Naplitny kettle - this is an old friend and helper in your kitchen.

Which model to buy naplitnogo kettle: Tips Tehno.guru edition

After analyzing all the advantages and disadvantages identified Dummies models for gas cookers, we can say that the best option is the maker Tefal C7921014.

Be careful! Cheap Dummies models can be forged and did not last long.

As we can see, his body is made of stainless steel, besides it more raids a number of advantages:

  • The unit spends little gas mileage, and therefore deemed economical.
  • Minimum care requirements;
  • It does not rust and does not collect inside coating and corrosion.
  • The handle is not heated and does not melt.

Do not buy teapots too thin alloy in the hope of rapid heating.

Naplitny kitchen appliance Tefal C7921014 will be practical and durable appliance in your kitchen. More details with its features and abilities you can find in our ranking. Our editorial staff advises to make a choice is in favor of this device, and you can be sure he will live up to your expectations.

teapot design should be comfortable for you personally, you can sometimes give up the obsession to buy the "right" version.

Our editorial staff sincerely wish you good shopping, and, of course, if you have any questions, ask them in the comments below the article. We will definitely get back to you soon and discuss points of interest.