Appliances are not so difficult to repair. Most of them are able to report the fault. Signaling an error, technology saves our time and effort. Consider that error means 5d on the washing machine samsung.
Signal states that in the drum too much foam. In the machine from the manufacturer Diamond samsung foam control can be passive and active. With active control machine alone suppresses the high level of foam.
If the device can not handle the amount of foam, it produces an error 5d. After that, the mode changes from active to passive. When the passive control is meant the natural settling of the foam. This process takes a lot of time.
Causes of
Most often, washing machine samsung 5d an error in case of improper use. Occurrence of errors can easily be avoided if you follow the instructions.
Main reasons:
- poor quality powder;
- amount of the powder does not match the volume of laundry;
- stiralka malfunction;
- drain filter is clogged;
- washing fluffy or porous items contributes to excessive foaming;
- Powder for hand washing in the machine gun.
Detergent for handwash foams strongly, while the powders "automatic" excessive foaming quenched foam stabilizers. Thanks to this foam comes out and does not get to the motor.
elimination
Sud appearance of errors, which is also shown as sd and 5d, in the washing machine samsung easily prevented. If the problem has been admitted, any measures taken will not have to. Washing device usually removes the foam on its own. After the disappearance of the problem of washing resumes.
In some models, remove excess foam can only be user intervention. To start the process, please click on the "Start (Pause)" on the control panel.
If the washing machine samsung sud will generate an error due to clogged drain filter, to remedy the situation will have to intervene. You need to clean this part. It is located in front of the washing device in the bottom corner of the small hatch.
When the Samsung model with an error code 5D:
- Stop cycle.
- Remove the laundry from the drum.
- Rinse the inside.
- Run cycle, reducing the amount of detergent.
- Refer to the master.
Possible breakages of individual parts stiralki that result in an error:
- pressure switch,
- connecting conductors,
- separate foam sensor,
- the control module.
It is considered a critical failure of the control module. Its renovation is complete replacement. Pressure switch controls the foam, so its failure leads to an error on the display. As well as connecting lines or foam sensor, it will have to be replaced.
In case of breakage of parts, causing sud and 5D errors, do not try to solve the problem. To replace the pressure switch or foam sensor will have to disassemble the machine. In addition to the skills required, it will be necessary to get expensive instruments.
Error 5d on the Samsung washing machine in most cases, does not mean its breakage. To get rid of the hassle, you can provide foam control even when buying stiralki. Such devices will automatically fight with foam.
