How to disassemble the juicer + Video

Content

Reasons for disassembly

Regardless of the model, the devices of the brand and the quality of performance they require regular maintenance. During the spin inside the machine accumulates bagasse, the remains of juice, which should be removed after each use. Delaying this could adversely affect the functionality of the device lead to premature failure. Despite the reliability of the design of most branded devices can fail. Depending on the nature of the damage repair can be complex, requiring specialized knowledge and the participation of experts or simple. In the latter case, you can do on its own, which need dismantling the structural elements of the juicer.

Device

For disassembly / assembly machine must have at least a general idea of ​​its construction. Devices for pressing may have a different design and design features. But in general terms, their roughly the same device. Each is equipped with a juicer:

• housing for mounting construction elements;
• steel (less plastic) float basket, where the grinding product;
• capacity for accumulating cake;
• a removable tank for collecting the juice;
• cover with a hopper for loading vegetables or fruit;
• pusher;
• a motor unit with the power cable;
• a control unit with a switch.

instruction

Under normal use and disassembly / assembly unit is a careful reading of the instructions. Traditional for us to disregard this document and the desire to solve problems by "educated bet" is often the cause unintended defects and output device malfunction. Such a document with a translation into the language of the customer included in the scope of any device from more or less well-known manufacturer. Usually it includes a description of:

• or device with a schematic demonstration of each photographic element;
• usage rules specifying the measures of safe operation;
• the procedure of preparation for use;
• the sequence of dismantling the structural elements and their reciprocal assembly;
• particular operation.

General disassembly rules

Before dismantling the unit should take care of the power failure. It is not only the permutation switch is set to "Off", but also removing the power cord. Adoption banal, but the current, given the potential danger of the device and a portion of forgetfulness housewives. To begin dismantling the unit for service should be only after a stop mechanism. In its most general form, regardless of the model, the sequence of disassembly can be as follows:

• removing the pusher from the hopper loading;
• Removing the cover, with preliminary detachment of attachment;
• Removing the shredder;
• dismantling capacity to collect juice.

Removed items should be washed, dried and put back into place in the reverse order.

Access to the engine

Most serious problem due to the engine failure. Before its repair should correctly assess their strength and experience. If it does not exist is better to use the services of professionals. Before disassembling the engine, make sure that the problem is indeed connected with the drive. You will need to check:

• the presence of voltage in the network,
• repair the power cord,
• plug.

If the need for complex repairs still have need to perform disassembly as described above, plus remove a pulley, which is usually twisted from the shaft in the direction opposite the operating speed. Access to the engine compartment opens from the bottom. To do this:

• loosen the fixing screws the protective cover of the motor compartment;
• if the engine is placed in a protective housing, it must be removed;
• remove the motor mount and to take it out;
• conduct a visual inspection, determine the nature of the problem and proceed to its elimination.

Features of dismantling of the centrifugal and screw machines

the above method can disassemble the juicer with the centrifuge from any manufacturer. The design may be nuances, but they do not fundamentally affect the disassembly procedure. Similarly, this procedure is performed with the vertical auger counterparts. The difference is that instead of float here has a volumetric screw in a protective casing. Horizontal screw devices on the device resemble a meat grinder. Their dismantling is carried out:

• removing the set nozzle;
• disconnecting the receiver from the main body of the screw;
• extraction of the auger;
• Access to the drive is carried out in most cases, also at the bottom.

Described mounting / dismounting options are not a guide to action and are exploratory in nature. Each specific device model versed in accordance with the guidance provided with the device, thus avoiding accidental damage.