Profile for plasterboard: the sizes and types

To install a partition or other structure at home, you need a profile for drywall. Amounts and types of these products may differ materially. We offer to understand their features, not to make a mistake at the time of purchase.

Types of profiles for gypsum board and their purpose: the basic classification

Manufacturers offer products of different shapes and sizes. To buy everything you need to install a particular design, it is necessary to clearly understand what are the different types of profiles for gypsum board and their purpose. Offer to meet with the main classification.

Surface-planar profile for drywall

Can be fastened to the ceiling or wall. Their configuration is standardized, but there are differences in material thickness, length and transverse dimensions of the product. Allow to generate a reliable framework for fixing plasterboard with the right choice of sizes and mounting compliance technology. It is important to remember that the price for Profile drywall It depends on the size and type.

Guide profile made of plasterboard: features

Labeled Mo (UW). It is the starting profile for drywall. The cross section of U-shaped. The walls are smooth. It acts as a support for various racks and jumpers. On it during installation are put on the remaining construction elements.

Guide profile for gypsum board can have a different length (up to 4.5 m). The most in demand of 3 m. The transverse dimensions are selected individually for a particular system.

The rack profile for plasterboard: design features

Labeled PS (CW). Placed inside the guide and used for fastening other elements of the system. Rack profile for drywall is hard enough. It is able to perceive a significant structure. It has a U-shaped cross section with additional extra shelves for fixing other components.

Attention! If the substrate is smooth, rack can be mounted directly to the wall or ceiling.

Ceiling profile plasterboard: Key

May be a carrier of PP (CD) or guide DPU (UD). Products with a U-shaped cross-section, but smaller than the wall, the dimensions for the space saving. To increase the rigidity of ceiling profile extra shelves and edges are provided for drywall.

To fix the elements, you can use a special fasteners. It allows you to set the ceiling structure of any shape and size.

Corner profile for plasterboard

To reinforce the outside corners of walls plasterboard structure may use a perforated angular metal sheets. For its production is metal thickness of 0.3-0.4 mm. Corners are set to putty and on top of the cover layer of putty.

Septum carrier profile for plasterboard and photo prefabricated

For the manufacture of plasterboard partitions used UW profile and CW. Origin allows to form trim structure. It is used in the formation of the perimeter walls and to provide the desired configuration.

Of partition profile for drywall CW ensures a sufficient rigidity of the system. Mounting plates can be carried out on both sides.

Offer see photos drywallThat you can create:

1 of 4

The arched profile of plasterboard

For arch type characterized by sophisticated design concept. To ensure sufficient flexibility, it has side slits. Additional perforation increases the stiffness of the product.

It allows to form structure with a radial curvature. It is made mostly of PP 60/27. Standard profile length plasterboard 3 m. The minimum bending radius of the concave member 500 mm.

Auxiliary components profile frame for gypsum plasterboard

For the installation of the correct size and shape of the system may require special hardware for drywall, each element of its specific purpose. You will need a connecting single lever, if it is necessary to connect the elements.

Also, you may have to purchase a profile:

• ground to create restrictions on lining the perimeter. The outer side puttied;
• pileate sheet mounting heater. Attached to the base. Eliminates the rails;
• L-shaped, if it is necessary to install in the wall with an open end of the finish or start bar;
• z-shaped to increase rigidity of the system;
• Beacon, if the base will align.

fasteners

dowels are used to fix the profile or screws. They clog or twist at the intersection of adjacent elements. As can act as fasteners:

• suspensions used for mounting ceiling. If necessary, they can always be bent to get the correct size plate;

• crabs having a characteristic cross-shaped configuration. They help to provide a rigid connection of intersecting straps;

• duplex brackets expired when the device tiered ceiling;
• angle brackets are installed at the ends of the structural elements.

Tip! When choosing a fixture sure to consider the size of the metal element.

The criteria for selecting the metal profile plasterboard

Mounted to the construction lasts long enough, it is necessary to choose the metal profile for drywall. It deserves attention not only its appearance or size, but also other important points that you should pay attention.

Coverage and thickness profile of the material

When you buy should give preference to galvanized products. It should necessarily verify the integrity of the coating.

The thickness of the product is particularly noteworthy. The larger the value, the stronger and more rigid metal profile, and will be higher than its cost. In case of insufficient thickness of the element during the installation and operating under load it can change its geometry.

Comment

Mikhail Starostin

Team leader repair and construction company "Home Premium"

Ask a Question

«For device baffles are optimal product thickness of 0.5 - 0.55 mm. However, if you have the financial ability should choose to 0.6 mm. The choice of thicker products is justified when installing high structures. "

Perforation of metal profiles for plasterboard

Given the choice, you can buy perforated products. Such a metal profile for drywall is much more convenient to install, since there is no need for drilling holes. Additional stiffener elements provide sufficient strength, while they have a lower weight than a smooth solid product.

Profile for plasterboard: Sizes and types offered by leading manufacturers

Many manufacturers offer a profile for GCR different size and type. Select the appropriate option can be difficult. We offer to get acquainted with the products of leading manufacturers and its distinctive features.

Profile for plasterboard Knauf is in high demand among professionals. All products have a dimensional and geometric precision. This greatly simplifies the installation work. However, their high cost draws attention to the products of other manufacturers.

Products and Metalist Giprok will cost a little bit cheaper. When you purchase should carefully inspect each product to make sure according to the specs. Gypsum plasterboard offers products with corrugation that increases their rigidity. However, when installing such elements may be difficult due to too tight contact surfaces at mismatch "pip". In the operation of construction can be heard squeak characteristic.

The calculation of the required number of profiles

Getting to the calculation, it should draw the next frame by putting a size scale. It can also be applied conventionally designation indicating each kind of metal sheets. Calculating the number of walls You can be performed as follows:

• guide. Twice the sum of the length and height of the frame. If there are openings, you should also add their perimeter;
• racks. They are mounted with a maximum pitch of 60 cm. To determine the required amount of length of the frame must be divided by 60 cm, the value obtained is rounded up to the nearest natural number, and add 1. The resulting value is multiplied by the height of the frame;
• webs, mounted with a pitch of 0.6 - 0.8 m at the docking sheets. For their manufacturing rack metal profile. The calculation is similar to the previous version. The resulting value is added to the required quantity rack profile.

Features installation of wall profile for drywall

Mounting wall profile for drywall is performed in increments of 0.4 -. 0.6 m distance is chosen based on geometrical parameters of attached sheets. Thus, if the width of the plasterboard 1.2m selected step 0.6. In this case, the metal profile is fixed along the edges and in the middle of the sheet. More relevant information can be found in the following video:

Nuances profile mounting for suspended ceilings

To headliner happened perfectly flat, you must strictly adhere to the technology. We offer watch a video, which will let you know all the nuances and subtlety of qualitative performance of works:

Average prices for a profile for drywall, depending on the type and size of the elements

If you have to install a large enough structure, it is important, how much profile. The cost will depend on many factors, including the manufacturer, type, size, products the metal thickness. Obviously, other parameters being equal price profile for drywall 60h27 will be less than 100 × 50 items.

The biggest demand is:

• Knauf PP 60h27 mm. One product has a length of 3 m longitudinal corrugations provide sufficient rigidity of the product.;
• Knauf PS-2 50h50h3000 mmHaving a C-shaped. It allows you to create a sufficiently tight joint.
• Knauf PS-4 75h50 3m.

Optional purchase products Knauf. Production Some manufacturers also received positive feedback.

Review profile SPK "Standard":

profile SPK "Standard"

Review of profiles for plasterboard "Ankara":

Profile for plasterboard "Ankara"

Share in the comments, what galvanized profiles to the size and view you prefer, how much cost you a frame of manufacturer products you have purchased.