projects bathhouses of the timber represented in a wide variety. This allows to select the optimal variant for each portion. We offer to meet with the existing species and their distinctive features, so you do not make mistakes in the selection process.
Read article
- 1 Types of projects baths from the beam
- 2 That is part of the project baths from a bar: a list of documents
- 3 Choosing baths projects of timber: guidelines to help make the right decision
- 4 Projects-bath houses, depending on the processing timber with a construction cost
- 4.1 bath projects from a conventional timber shaved
- 4.2 baths Projects of glued laminated timber construction with the indicative prices
- 4.3 Projects of baths shaped timber with an estimated cost of construction
- 5 Baths from a bar with additional structural elements with photo projects
- 5.1 On the veranda
- 5.2 With terrace
- 5.3 With attic
- 6 Finished projects baths from a bar of different sizes
- 6.1 bath project from the timber 4 to 4: Photo of interesting solutions
- 6.2 Standard projects of baths from the beam 5 by 5 meters
- 6.3 The project baths from a bar 6x4: complete solutions with different layout
- 6.4 bath project from the timber 6 to 6: Possible layout
- 7 Construction of the baths from a bar
- 7.1 Laying the foundations and walling
- 7.2 Mounting of roof and oven
- 7.3 Finishing work
Types of projects baths from the beam
existing projects are divided into standard and customized. The latter are created specifically for the particular needs of the family. They have a unique design on the outside and inside layout. Often in their design are not considered particularly landscapeAs well as the location of the communications that can deliver some difficulties during the construction phase.
Typical projects are simple execution. They repeatedly erected at various sites, and therefore there is no fear of occurrence of unusual situations. They have a simple implementation and low cost. Suffice it to view a catalog to choose the appropriate option.
That is part of the project baths from a bar: a list of documents
Drawing up of the design documentation carried out in two stages. First, prepared draft project, which includes:
- An explanatory note, which reflects all the technical indicators;
- plan foundation and floors;
- appearance facade;
- plans overlap and roof;
- explication of premises;
- three-dimensional visualization of the structure.
Attention! If there is a cadastral map is the binding of the structure to the site.
Draft plan is approved, after which begins the development of the detailed design. On the basis of this document to the building. working draft bath of timber with or without loft itself includes:
- routing;
- wreaths plan;
- specification, containing information about the planed and the cubic capacity of the walls. This information is required to purchase sufficient quantities of materials.
Choosing baths projects of timber: guidelines to help make the right decision
Before you select a project for the construction of Baths of timber turnkeyShould be taken into account:
- the number of regular visitors. If the family often visit, be sure to consider not only the members of the family;
- requirements for the presence of certain premises. Not everyone is quite the changing room and steam room, bathroom with washing. Many would prefer to have a separate rest room and terrace;
- number of floors.
Comment
Mikhail Starostin
Team leader repair and construction company "Home Premium"
Β«On the basis of the desired functional area and the developed structure and layout calculated necessary amount of material. "
Projects-bath houses, depending on the processing timber with a construction cost
project price Bath-house can vary significantly depending on from what timber under construction. We offer to meet with the distinctive features of each type of wood products, as well as the average value of buildings.
bath projects from a conventional timber shaved
The most affordable option. The material is produced by cutting logs to form the desired product section. The thickness of the elements used for erecting walls, typically 150-200 mm. Using sliced ββtimber greatly facilitates the installation work, if maintained the geometry of each element.
For the construction material is often used with natural level of humidity. During subsequent drying of wood elements begin to shrink and often deformed. Over time, the surface of sliced ββtimber appear characteristic crack, whose number depends on the quality of the material used.
Attention! Log cabin of sliced ββtimber should be left for a few months to shrink, and only then can we start to finish.
building area, mΒ² | timber size, mm | The average price (as of November 2018), rub. |
28 | 100 Γ 150 | 290 000 |
150 Γ 150 | 320 000 | |
200 Γ 150 | 340 000 | |
60 | 100 Γ 150 | 370 000 |
150 Γ 150 | 430 000 | |
200 Γ 150 | 475 000 |
baths Projects of glued laminated timber construction with the indicative prices
Glulam is of high quality pictures. It is made not from the whole woodAnd of lamellas glued together. Pre-treatment, grinding and drying of each element and use for bonding Special water-resistant adhesive composition enables high strength characteristics material.
The technology used allows to provide optimum moisture level, surface quality and optimal thermal insulation characteristics. The material does not shrink, but because you can abandon the process interruption during construction of baths of laminated veneer lumber. On its surface cracks are not formed, and it prevents warpage. Additional treatment with protective varnish can improve the strength characteristics and extend the service life of the structure.
1 of 6
Attention! Choosing a laminated board for a bath or residential buildings should be preferred material having FCO security group.
Prices for the bath of the laminated veneer lumber depends on the characteristics of the project. It is the most expensive option. Offer to meet with an estimated value of:
building area, mΒ² | timber size, mm | The average price (as of November 2018), rub. |
31 | 180 Γ 200 | 999 000 |
37 | 180 Γ 200 | 1 150 000 |
60 | 180 Γ 200 | 1 340 000 |
102 | 180 Γ 200 | 1 500 000 |
Projects of baths shaped timber with an estimated cost of construction
Shaped beam through the processing in milling line has a special geometry, greatly facilitates the installation work. For manufacturing the shaped solid wood beams is used, the level of which at least 22% humidity. This helps to reduce shrinkage and prevent cracks of the framework.
Manufacturers offer a shaped beam with different surface geometry. Instead of individual spikes comb-grooves may be used. Due to this Embodiment elements sufficiently tightly adjacent to each other. Belt insulation, laid between the elements, eliminates the additional insulation of walls. When you use a profile with a comb from the use of heater can be dispensed with.
Comment
Mikhail Starostin
Team leader repair and construction company "Home Premium"
Β«Before the start of finishing work should be given a bath to stand for a few months. "
Average prices of baths Projects of the profiled bars are shown in the table below:
building area, mΒ² | timber size, mm | The average price (as of November 2018), rub. |
15 | 100 Γ 150 | 220 000 |
20 | 100 Γ 150 | 260 000 |
36 | 100 Γ 150 | 450 000 |
Baths from a bar with additional structural elements with photo projects
Simple structures are accessible cost, but they are not always spectacular and functional. Offer see photo projects and identify the distinctive features of the baths from a bar with additional components. Perhaps among them you will find a suitable option for your family.
On the veranda
Veranda It is indoors, which is part of the structure. In this case, two or three walls usually glaze. With the right design of bath from a bar with a terrace can be used year round.
Such buildings must meet certain requirements:
- for the construction of the porch and the main part of the building should use the same timber;
- between baths and verandas base should be rigid connection, if the structure is erected on the heaving soil. Nor should it be hard to fix roof verandas and main roof to avoid deformation of the structure;
- floor veranda should be positioned 5 cm below the floor of the main premises.
Attention! Veranda is designed in the development phase of the project structure.
With terrace
For those who like to relax, not only in the bath, but also in the open air, such a project would be the best option. Here you will not only wash, but also picnics or partying outdoors. The terrace can be open and closed. The first option requires regular maintenance to remove dust, dirt, and fallen leaves. The second will not allow to create an atmosphere of unity with nature.
Offer see photos to appreciate the aesthetic and elegant external architecture of the building with terrace:
1 of 6
With attic
If the house is relatively small, and there is a lot of visitors, you should pay attention to the two-story bath projects from a bar or with attic. Such a structure will provide additional space for relaxing and comfortable accommodation of guests of the family. Sometimes the attic is used for placement of the pool table or a small banquet hall, where you can organize family celebrations.
Offer see photos of interesting solutions:
1 of 5
Finished projects baths from a bar of different sizes
If you do not know exactly what should be your room from the bar, check out the finished project. We collected for you some interesting solutions of different sizes, so you can compare the layout of buildings with different quadrature.
bath project from the timber 4 to 4: Photo of interesting solutions
The easiest and most affordable option. bath project from the timber 4 by 4 meters is optimal for a family of one or two people. Gather a similar structure can be anyone. As a rule, the structure has a square shape without any additional components. steam room usually combined with a sink, although it is possible and the separation of the premises. There may be a small recreation room and a waiting room.
Meet interesting projects baths from a bar 4x4 m:
1 of 6
Standard projects of baths from the beam 5 by 5 meters
Quadratic optimal structure for a small portion. bath project of timber 5 by 5 m presupposes a steam room, washing, showers and restrooms. May provide for different amounts window openings.
The project baths from a bar 6x4: complete solutions with different layout
Any project baths from a bar 6x4 m will be the best option for a small family that likes to receive visitors. The structure may have a terrace or attic. Often provides steam room, shower, rest room.
baths projects from 4x6 lumber with a terrace and other structural elements are as follows:
bath project from the timber 6 to 6: Possible layout
A large area of ββthe building makes it possible to provide for the possibility of placing different rooms. Often projects are developed two-storey baths from the beam 6 by 6 m. In this case, the recreation room is often located on the second floor providing shower and toilet. AT single-storey buildings all located at the same level.
Attention! Buildings with an area of ββ36 mΒ² are relevant for large families and groups.
With projects baths from a bar 6x6 meters can be found below:
Construction of the baths from a bar
If you can not order a bath of laminated veneer lumber project turnkey, is to do it the erection of their own hands. To obtain a strong structure, warm and reliable, you should carefully follow the technology of construction work. We offer to meet with the indicative action sequence.
Laying the foundations and walling
Bath House of laminated veneer lumber is light enough structure. This eliminates the power device grounds. However, in a location selected for placement of the furnace, it is required to reinforce the floor and the base.
Choosing the base, be sure to take into account the characteristics of soil at a particular site and ground water level. Most often, preference is given to Strip foundationIn which the filling:
- digs a trench suitable size. Typically, the width of the tape should be poured to 10 cm greater than the width of the walls;
- established formwork;
- mounted reinforcing belt;
- poured concrete;
- performed waterproofing works.
pile foundation relevant for any portion. Prepared piles twist to the required depth. They are located at angles along the walls. In place of installation of the furnace base is further enhanced.
possible fill monolithic base. In this case, a pit is dug the desired depth, casing is set, and the solution was poured. It's an option quite expensive, which significantly reduces its popularity.
After pouring the foundation proceed to build the walls. How do you do, you will learn from the video:
Mounting of roof and oven
installation procedure roof It depends on its design features. Most often, preference is given to one or gable design. We offer watch the video below and get to know the sequence of work when the roof device:
Getting erection oven, Be sure to get acquainted with the project documentation. It contains information about the size and configuration of the furnace. Detailed poryadovkoy to avoid typical mistakes and become the owner of a well-functioning design.
Finishing work
High surface quality of the material used eliminates the extra finishing the interior space. If you do not know how to create a cozy and comfortable atmosphere, look at the following picture:
Share in the comments, how to make room on your site, and why do you prefer it to this structure.