🏠 Suspended ceilings of plasterboard: the photo in the interior and installation procedure

If you want to add a room identity, you should pay attention to the ceilings of the drywall. Photos of interesting solutions can be used as the idea to develop your own project. We offer to meet with the distinctive features of a room with a plaster potolkom.podobnyh systems and their installation order to make it easier to perform the work with his own hands.

Device false ceilings made of plasterboard of different types

Appearance attachments ceiling plasterboard It depends on the device. We offer to meet with the design and the distinctive features of each type.

The device is a single-level ceiling of plasterboard

Sibling false ceiling is a structure arranged parallel base. It is composed of:

• drywall sheets. Characteristics of the material is directly dependent on the operating conditions of the ceiling system;
• frame with which manages to ensure the necessary stability of the construction. made of profile;
• metal hangers for fastening sheets of single-level ceiling of plasterboard;
• fasteners. Dowels for rack mounting and screws for fastening the base material;
• finishing materials, allowing to give the desired ceiling surface appearance.

Duplex and three-level plasterboard ceilings

duplex Suspended ceilings have a more complex design concept. The basis for the first level are the ceiling overlapFor the second - the first frame system level.

The configuration and location of the second level is carefully calculated. He is always in harmony with the first. Edge line should look impressive and aesthetically pleasing.

At the three-level ceilings complemented by one more level. When properly selected configuration and color scheme manages to perform zoning area or to achieve another desired effect.

Attention! Each successive level should have a smaller area.

Complex types of suspended ceilings made of plasterboard

Complex design of the installation of such systems makes it difficult to like a suspended ceiling of plasterboard with their hands. It may include non-standard beautiful patterns and other elements that add a unique design.

Technical characteristics of the different types of plasterboard ceiling

When deciding how to make plasterboard, should be to choose the right material, taking into account the conditions of future exploitation. The selection can be made in favor of:

• GCR. In the center of the multilayer structure is a plaster sheet, which is coated on both sides with cardboard. The standard length is 2 - 3 m and a width of 1.2 m and with a thickness of 9 - 12 mm. For the manufacture of ceiling systems preferably utilize a nine sheets of drywall. Relevant for living rooms;
• GKLO. Fire-resistant material, which are used in the decoration and industrial premises communication device mines;
• Gypsum plasterboard. Increased moisture resistance of the material makes it possible to use it at bathroom decoration, food, bathrooms. Additionally, the protective layer is applied;
• GKLVO. Plasterboard this type combines high resistance and moisture resistance;
• GVL. At gipsovolokonnyh sheets of cardboard used in place of the mixture based on cellulose. The material has high strength characteristics. He thermostable. The standard thickness of 6 - 10 mm.

Suspended ceilings of plasterboard: photo options in the interior of different rooms

In order to room looked beautiful and harmonious, should think carefully about the design ceiling. design choice will depend on the purpose of the premises and its area. Offer see photos already implemented projects. Perhaps some of the designs you want to use as an idea.

Plasterboard ceilings in the living room with photo examples

Price ceiling drywall in the room takes on a different plan. Of particular importance is the unique composition created and presentable. More often than not here preference is given to a multi-level systems, including involving the use of additional materials.

Color scheme selected according to stylistic. Most often, preference is given to light tones, but there are other options. Highlighting each level adds personality. We offer watch the ceiling photo of drywall that you might want to do with their hands:

1 of 6

Making drywall ceilings in the bedroom and children's room

Unnecessarily complicate the suspension structure in bedroom not worth it. There needs to prevail a relaxing atmosphere. Preferably white or light colors. Bright colors or complex images should be avoided as it can cause emotional stress. Illumination should be adequate, but not excessive. The number of levels is usually no more than two.

preference is often given to a simple box with lights. However, placing an area of ​​over bedYou can consider more sophisticated options. See photos of interesting solutions:

With suspended ceiling system is commonly divided into three areas: work, games and sleeping space. Given the small area childrenExcessively focus on something you should not. Allocate just the working area and a place to sleep. Check out the photos already implemented projects:

Design ceiling gypsum board in the kitchen and in the bathroom

Given the purpose of food, Design of the ceiling plasterboard here is simple and concise. Only two levels, which can be done either strict or curly. It all depends on the overall stylistic premises and installed furniture. For zoning space often use dynamic insertion. Look interesting photo of suspended ceilings:

For bathroom selected design considering floor space. For standard rooms optimal tier system. When a large area, you can select another option.

Is it better to ceilings or plasterboard: a comparative analysis of both options

Both options are approximately equal in popularity. Both systems allow you to add originality and uniqueness. To help you decide which is better: plasterboard or tension, compare the two systems on the important parameters:

• strength. Both designs have the best technical parameters and physical properties, and because, when properly installed, be sure to last for a long time;
• mounting. With step by step instructions to install brand ceiling with his hands in the cellar. special system may be required for the installation of a tension system;
• sound and thermal insulation characteristics. Tension and suspension systems are well insulate sound, which is especially important for multi-storey buildings;
• presentable. Both systems are able to integrate harmoniously with the interior.

Attention! What ceilings better-tensioners, or gypsum board, will depend on the financial possibilities. When performing work independent suspension structures are preferred.

Procedure for the manufacture of a two-level ceiling of plasterboard with their hands

If you decide to perform all repairs on their own, offer to find out how to make plasterboard. On this depends the appearance, durability and operational safety of the ceiling structure.

Materials and tools

The list of necessary materials and tools depends entirely on the design features specific suspension system. Without fail it is necessary to have in place:

• plasterboard sheets with desired characteristics;
• profile for carcass manufacture;
• metal hangers;
• fasteners;
• laser level;
• measuring instruments;
• screwdriver;
• primer;
• spatulas;
• finishing material;
• elements of the lighting system.

Preparation of the project with their hands ceiling plasterboard

The composition of the project documentation must include:

• sketch. It is performed in the color and scale;
• drawing. Here are drawn in detail all the elements of the future system. If a multi-level structure, it is developed for each individual drawing;
• materials calculation. From thoroughness of the implementation of this step depends largely on the financial cost and the strict observance of technology in the future.

Calculation of the project ceiling of plasterboard best left to professionals. The development of their own hands should perform, taking into account:

• room area;
• stylistic and color processing facilities;
• configuration and height of the ceiling.

Step by step instructions for the manufacture of plasterboard ceiling with his hands

Avoid the typical mistakes made by novice builders, will guide you through the production ceiling of plasterboard with their hands. Adhering to the reduced step by step instructions, you can create a beautiful and reliable system that harmoniously fit in interior room.

How to make your own hands ceiling frame Plasterboard: the sequence of actions

To ceiling system has turned a solid and reliable, it is necessary to understand in detail how to make a frame for the ceiling of plasterboard with their hands. The structure must have sufficient strength. Works are carried out in the following sequence:

Illustration	Description of the action
	A laser level looking for the lowest point or angle in the room. They will be the starting point for the location of the future system. Without fixtures plasterboard will be located at a distance of 5 cm, if - after 9 cm, but not less than 4 cm.
	Apply markup. With color cord repel the lines that correspond to the positions of the guide profile. In accordance with the developed project applied in a pattern on the ceiling. In this case, we consider that the point of intersection in the drawing correspond to the intersection points of the drywall, and we carry out the markup for fasteners.
	Along executed markup fasten the guide profile. To fix, you can use ready-made holes or to use push-through installation. The distance between the swirl screws should not exceed 0.5 m.
	Fasten the rails to the roof surface in accordance with the previously performed layout.
	By the guide, is attached to the ceiling surface, fasten the outer rim and inner rails.

Constructive frame performance can differ significantly. When a distance between the guide rails and suspensions used ceiling profile. We offer watch a video describing the process of the ceiling of plasterboard with their hands mounted in this way.

Installing drywall to the frame

After the carcass assembly time to install drywall on the ceiling. Works are carried out in the following sequence:

Illustration	Description of the action
	All elements are cut to size. It is important to ensure high precision, since the adjustment of height is difficult enough.
	The sheets are fastened to the frame elements. Fixation is performed every 10 - 15 cm.

Finishing the ceiling plasterboard

At the final stage of finishing the ceiling is performed drywall, taking into account the developed design. Initially are sealed joints with putties. Then, the primer layer is applied, then two coats of putty. After complete drying of the last layer of the ceiling surface is painted or finished with some material.

Caring for plasterboard ceilings

If there is a smoking person, after a period of operation of the drywall may turn yellow. Also on the surface of the ceiling system the dust settles, and there are a variety of pollution. To prolong the life of the system, should:

• give preference to moisture-proof material;
• used in dry cleaning and lint free cloth;
• gather dust vacuum cleaner, After washing with soap and brush;
• Exercise caution near the lamps;
• use moistened wipes for removing difficult stains dirt. Perhaps adding a small amount of detergent;
• stop smoking in a room with a plaster ceiling.

Tip! To mask the yellow plaque, you can use a special coloring pen and restore the uniformity of the surface with a lot of colors you can use spetskraski.

Share in the comments how you decide to make a false ceiling of plasterboard and why have preferred this design.