Penoplex: specifications, dimensions, price, operation

For a comfortable stay in the cold season when building a house you need to take care of its high-quality thermal insulation. The market offers a huge number of materials for insulation, which differ in performance and cost. The most effective of them - penoplex. Technical characteristics, types and cost of this material from different manufacturers are described in this article.

What is penoplex: Types

Penoplex (or erudite Styrofoam) was invented in the United States over 50 years ago. He immediately won the confidence among the buyers of the low thermal conductivity and cost. In the production of granules are pressed under the influence of pressure and heat, the foaming is used for a special catalyzing substance. Next, the mass is extruded into molds, and after some time the cells are filled with air. Through this process the porosity is uniform, and the resulting material is obtained strong and light.

Currently, there are three types Penoplex:

1. Penoplex 31 standard. It has poor resistance to compression, however mainly used for Pipe insulation various. However, in some cases (when the load is not too high), they insulated floors, foundations, pools and much more.

   

2. Penoplex 35. The most demanded kind of this material is now due to the presence in the composition antipirenta - enhancing agent resistance to combustion. Therefore, the construction of buildings in most cases (for the warming floors, walls, roofs, etc.) used by him. For example, penoplex 50 mm 35 class - the perfect solution for thermal insulation foundationThe use of 30 mm Penoplex rational for walls and roof.

   

3. Penoplex 45. The strongest of the species represented. Due to the high densities, such insulation can withstand high loads, so even used in road construction in order to prevent buckling during freezing. After all, in the warm season, some types of soil under the road to actively absorb water, in winter it is because of this can crack the pavement. And if you use a heater, freezing will be kept to a minimum, or does not happen.

   

Thus, in the construction necessary to choose the right type of material in order to avoid settling of the building and saving money (if the load is small, you can choose Penoplex 31 standard).

Penoplex 35 as directed divided into four types:

• Penoplex Comfort.
• Penoplex Foundation.
• Peropleks roof.
• Penoplex Wall.

Each contains antipirent, but some specifications Penoplex 35 different types of costs, so consider them in detail.

Penoplex Comfort: technical specifications

Penoplex Comfort - the most versatile of the insulation of all the species. It is suitable for the foundation, and walls, and roof. It is in the production of this type were first tested L-shaped connection plates, which are securely sealed joints and so are now used in most cases.

This material has the following specifications:

• Thermal conductivity this material is about 0.03 W / m * ℃. Preferred among all the thermal conductivity of insulating materials is achieved by a fine-mesh structure (0.1-0.2 mm).
• water vapor permeability - 0.013 Mg / (h * m * Pa). This figure is almost zero, so the water absorption of the erudite Styrofoam almost completely eliminated.
• flammability - G4 (silnogoryuchy). Despite the high degree of flammability, spontaneous combustion of the material is impossible, and its decay can be put out quickly.
• High strength. The material is able to withstand a load of 20 tons per 1 m².
• Penoplex density. Comfort is in the range 25-35 kg / m³. It depends on the thickness of the product and destination.
• record longevity - 60-90 years even under severe conditions (high humidity and low temperatures).
• Wide range of sizes. 1200x600 standard plate size, but the thickness may vary from 20 to 100 mm. Each type is suitable for a particular purpose, such as technical specifications Penoplex Comfort 50 mm permit its use for thermal insulation of the foundation.
• Wide operating temperature range -50÷+75℃.

Important! Due to the high flammability of the material is not recommended for use in industrial premises, which may cause an open flame.

Penoplex Foundation: physical features,

The main application Penoplex Fundam 50 mm - insulation underground structures and foundation all buildings and structures. Due to its high resistance to moisture, for heavy loads and the ability not to change their long years original characteristics, the material protects the building from the ground water and not squander in the long operation.

Installation of foundation - the process time-consuming, the use Penoplex foundation allows it to simplify and speed up, as these boards are installed in minutes. In addition, provision penopleksageo following specifications:

• The density of the material 29-33 kg / m³. For this type of Penoplex this figure is quite important, since it determines the compression strength;
• Compressive strength at 10% load of not less than 0.27 (2.7; 27) MPa (kgf / cm2; m / m2);
• Static bending strength not less than 0.4 MPa;
• Water absorption for 24 hours not more than 0.4% of the total volume;
• Water absorption for 28 days - 0.5% by volume;
• fire resistance - class G4;
• Coefficient of thermal conductivity under normal conditions (25 ℃) - 0,030 W / (m * K);
• The calculated heat transfer coefficient Operating "A" under 0.031 W / (m * K);
• The calculated heat transfer coefficient under operating conditions "B" of 0.032 W / (m * ° C);
• Operating temperature range - 50 ÷ + 75 ° C.

Features Penoplex Roofing: technical characteristics, operating conditions

Roof - part of the building is constantly exposed to environmental influences. Therefore, all its layers, including insulation must meet the high requirements of strength and moisture resistance. Penoplex Roof - the best choice in terms of value for money.

All the technical characteristics of this material are identical Penoplex Foundation. The only exception is the compressive strength coefficient (0.25 MPa), it is somewhat lower because the roof is not experiencing loads such as foundation. Therefore, by reducing the number of the indicator is reduced material cost.

The main feature of Penoplex Roof - the ability to not only retain heat inside the building during the cold season, but also to protect it from exposure to sunlight in the summer. Thus a comfortable microclimate in the house will be maintained all year round.

Another advantageous Unlike other insulating materials - high index soundproofing, So birds and branches overhanging the roof, will not interfere with your comfortable stay.

Penoplex Wall purpose and characteristics

The best solution for insulation of walls of the house from the outside - penoplex. Price Penoplex wall is lower than that of other types of material, since its strength is somewhat lower - 0.2 ÷ 0.25 MPa. However, this does not prevent its use in the following conditions:

1. Thermal insulation of external walls (Including sandwich panels and walling block houses).
2. Insulation of the outer base of the house.
3. Insulation internal partitions (e.g., in the basement).

The main feature of this material - the possibility of its use in multilayer decorative finishing. Due to the special properties, it is able to withstand the load from plaster, putty, Lining, and so on. Furthermore, due to minimal water absorption, can be any wet solutions.

XPS: specifications and price

Its popularity among builders around the world extruded polystyrene won thanks to a special quality, achieved thanks to a unique manufacturing process.

Specifications TECHNOPLEX:

• Steam and water resistance.
• Environmentally friendly.
• Durability.
• High compressive strength due to a flat cell structure (e.g., technical specifications Penoplex 50 mm can withstand the maximum load at almost any weather phenomena).
• Low weight.
• Low thermal conductivity.
• Easy installation.
• Biological stability.
• The almost complete absence of chemical reactions.
• Combustibility.

Possibility to repel moisture - an important indicator for all thermal insulation materials. In extruded polystyrene indicator waterproof top. With this material, even a pilot study was carried out: it was placed for 10 days in water. When the term came to an end, the water was only in the external cells that have been damaged during transportation or cutting, the inside of the material is not a single drop fell. In addition, the vapor resistance rate is also high, it is possible to compare the levels of tar paper.

Interesting! Many argue that the building envelope need to breathe, that is, all the layers of walls, ceiling and floor should pass air (and thus the steam). However, with air and heat is lost, which is unacceptable for heat-insulating material. For ventilation should build high-quality ventilation system, rather than creating a movement of air inside the walls.

In the production of this material as catalyzing agents act freons, which is absolutely safe for the environment and more completely purged of air during manufacture. Therefore, the ecological safety of this material at the highest level.

Penoplex Manufacturers claim that the life of these products - at least 50 years. Moreover, the experiments revealed that the extruded polystyrene foam is capable of withstanding changes in temperature and Numerous freezing, preserving the original characteristics, so you can use it in any regions of the country.

Thermal conductivity - the main characteristics of insulation. Penoplex has the lowest possible rate in comparison with other materials for insulation. And depending on the percentage of moisture content in the material it changes slightly. Therefore, extruded polystyrene is ideal for warming all surfaces, including the roof, the penetration of moisture under which a fairly large.

Extruded expanded polystyrene not only resistant to moisture, it does not react with most chemicals (e.g., salts, alkalis, alcohols). However, there are also exceptions, certain compounds are able to destroy the structure of the material and even completely dissolve it (e.g., hydrocarbons, ethers, oil paints). Furthermore, due to the absence of the biological component, active material attracts microorganisms, however rot completely excluded. However rodents can spoil it, performing it in tunnels.

Slabs of this material are lightweight, so easy to mount without any special tools. In addition, they are easy to cut with a knife in the usual, so the installation can handle any.

The only distinct lack of material - flammability. Depending on the type and the presence in the antipirentov it relates to the different classes of fire. But in general we can say that the resistance to open fire at the material there. However penoplex not lit, and only melts, and if the fire is put out immediately, not even the residual decay.

Sheet size Penoplex

Dimensions of plates Penoplex standard - 1200x600 mm. They differ only in thickness, on which for ease of use depends on how many pieces per pack. Penoplex thickness is from 20 to 100 mm. Thus, "comfort" type equipped with plates of 4 (with a thickness of 20 mm) to 18 pieces in the package (at 100 mm).

The most common sizes for Penoplex Foundation - 50 and 80 mm. They are equipped with 8 and 5 units respectively. This will determine how many meters² in packaging (50 mm Penoplex Fundam has a total area of ​​5.76 m²).

Review of prices Penoplex 50 mm, 30 mm, 100 mm

How much is penoplex? Depending on the purpose and characteristics of size and price per piece Penoplex differ significantly. First of all the value is influenced by the strength, moisture resistance and thickness. Therefore, based on these figures, the following is a comparison chart.

Title	Characteristics	Features
Plates Penoplex Comfort 30	The minimum strength of the material	0.12 MPa	Strength and thickness of the material is fairly low, so it is advisable to use it only in places where increased load excluded. The main advantage - low price per sheet Penoplex and moisture resistance.
Water absorption for 24 hours, no more than	0.5% by volume
Width	600 mm
Length	1200 mm
Thickness	30 mm
Price	115 p. per sheet
Plates Penoplex Foundation 50	The minimum strength of the material	0.27 MPa	Due to its high strength at both the compression and bending such plates are perfect for thermal insulation of the foundation, in any region of our country.
Water absorption for 24 hours, no more than	0.4% by volume
Width	600 mm
Length	1200 mm
Thickness	50 mm
Price:	199 p. per sheet
Plates Wall 100 Penoplex	The minimum strength of the material	0.25 MPa	With a maximum possible thickness of the plate, this material is suitable for use in the most northerly regions.
Water absorption for 24 hours, no more than	0.4% by volume
Width	600 mm
Length	1200 mm
Thickness	100 mm
Price:	365 p. per sheet
Wall Plates Penoplex 50	The minimum strength of the material	0.12 MPa	The cheapest of the entire line of standard stove is suitable for insulation of both external and internal partitions.
Water absorption for 24 hours, no more than	0.5% by volume
Width	600 mm
Length	1200 mm
Thickness	50 mm
Price:	105 p. per sheet
Plates Penoplex Pitched roof 100	The minimum strength of the material	0.3 MPa	The ratio of the size and price Penoplex in this case is optimal for harsh environment where possible damage roofAs well as frequent temperature changes.
Water absorption for 24 hours, no more than	0.4% by volume
Width	600 mm
Length	1200 mm
Thickness	100 mm
Price:	143 p. per sheet

Related article:

To properly organize the insulation of walls, ceiling and floor space you need to know certain features and properties of materials. To help you, provided detailed the thermal conductivity of building materials tableDescribed in this article.

Output

XPS is currently the best insulation material for all surfaces in the building. The main thing, according to the operating conditions and construction in the region, to choose the correct thickness and type of material.