Cellar, plastic garden: dignity, model, installation

organize good conditions for food storage is not just fast and efficiently. It is necessary to prevent excessive heat, but not to increase the consumption of energy resources. Needs an effective ventilation and sufficient protection from temperature changes outside. Perform simultaneously all important conditions will be easier if you buy to give the cellar of plastic. How to implement a similar project with minimal cost, described in this article.

Why the need for a cellar of plastic

In the preparatory phase of the project should be precisely formulated terms of reference. This will allow the right to determine the amount of funding and labor costs. In the course of a thorough investigation will be eliminated excesses and considered really important nuances. First, we need to clarify why it took the appropriate structure.

In this case, make high demands for environmental safety. It is particularly important to maintain perfect health and hygiene conditions for the storage of vegetables, sausages, other products with no special protective packaging. There need enough effective ventilation. Easier to store canned, sealed jars of pickles. However, in this case it is necessary to ensure maintaining of the temperature above zero.

Installing the cellar of plastic for home and garden in the ground simplifies the task of insulation from the weather. Ventilation is also not difficult to create using a model system consisting of two tubes (inlet and outlet air). However, in this embodiment, there are additional problems:

• Side and top backfilling creates a pressure on the walls, because the design must be durable.
• Natural moisture increases after rain, watering plants. It is necessary to provide protection or to apply appropriate resistant materials.
• With the high level of ground water there are forces, ejecting the hollow building up. It is necessary to prevent such movement.

Note! When selecting a finished cellar made of plastic should pay attention to the nuances of the above. But in any case have to be based on real data of a particular plot of land. In addition to the groundwater level take into account the depth of frost penetration. It has a value of the geological structure. The rocks, for example, the implementation of such projects will be significantly impeded.

Modern cellar of plastic of good quality must be rated for continuous operation. Useful rich basic equipment or for acquiring further specific model lamps, racks and other accessories.

Modern plastic cellar for questioning: technical specifications and features of the application

This scheme will help to understand how experienced designers solve problems outlined in the previous section of this article. There is shown a complete cellar equipment from polypropylene:

• Luminaire with junction box (1), you can quickly connect the cable to a manual or automatic switch.
• Specialized devices (2) are useful for the operative control of humidity and temperature.
• The double insulation of the hatch (3) will prevent cold flow inwardly in the most severe frost.
• Wooden staircase (4) impregnated with quality resistant to decay. Similar materials are made shelves and wooden flooring.
• ventilation pipes (5) mounted at the factory, which ensures air tightness and reliability of connections with the housing. Built-in valve is closed, if it is necessary to block the flow of cold air from outside.
• The floor stiffeners are holes (6). To insert rebar to reinforce concrete screed. Such a floor covering provides the necessary strength and its weight prevent ejection structure up groundwater.
• Additional fixing to the concrete slab, or other external base anchors can be installed through the holes (7) in special horizontal ledges.

On such a structure can not have a negative impact of freezing and other negative external influences. Further advantageous characteristics of the plastic has a seamless cellar. In such products is sealed by the structure itself. An additional "plus" a higher strength.

But do not reject the right option precast cellars of plastic. Such products are easier to transport, unload, assemble without assistance. In the event of damage, you can quickly replace the failed unit without excessive expenditure of time and money.

Such designs take up more space on the land. But it is more convenient to use them due to the gentle slope.

Advantages and disadvantages of plastic cellars

When compared with the use of brick and other "traditional" materials necessary to note the following positive components:

• This design can be installed on a building or near it, in a fully submerged form, or with an elevation above the ground, on the surface.
• Ready for the cellar of high groundwater provides sealing without additional insulation layers.
• Factory products are created by carefully calibrated design documentation. The manufacturer guarantees the size, strength, and other technical parameters, executes its obligations in writing.
• Products are supplied in kit form. You can perform installation work completely independently. We do not need more interior.
• Plastic parts do not absorb odors, easy to clean from pollution.
• They do not spoil the corrosion and micro-organisms. At observance of the installation and the manufacturer's recommendations on the operation of such structures without damage shall serve for 40-50 years or more.

This product is delivered to the right address in the ready for operation. Therefore, with proper preparation of the installation will be done very quickly. This fact is another major advantage.

The objective analysis of the shortcomings and need to add facts that deserve special mention:

• Although ribs, plastic strength smaller compared with iron, concrete, brick.
• If for improving characteristics increase the thickness of the walls will increase the cost.
• Manufacturers offer a wide but limited standard range of choice.
• For weighting and additional protection is applied "wet" construction technology, which increases the real term is complete assembly operations.

In a direct comparison of the cost of construction of improvised and "classic" material is cheaper. But an accurate conclusion can only be done taking into account the full scope of work, ranging from transportation costs. We also must not forget about the durability of polymer products. For their safety does not need to update protective coating, so you can count on a minimal operating costs.

Features plastic cellars to give from the manufacturer

Such products are made in view of the real requirements of the market. Specialized marketing services company carefully studying consumers' opinions for the formulation of precise tasks of design units. In this approach range sufficiently wide and varied to select a suitable embodiment.

When buying a high-quality plastic products from the cellars also keep the following advantages:

• Precise engineering calculation of the wall thickness, the power frame attachments doors and other elements.
• The correct selection of materials, component parts and other functional elements.
• Skilled tightness test compounds.
• Assembling executed using factory methods.
• Official guarantee that you can use when problems arise.

Theoretical assumptions about the benefits of support reviews of the current owners:

Sergei Larionov, Yaroslavl, plastic cellar SPIC "Zubr": Advantages: Quality, service, and security. It took two days to sign the contract, pay. After 3 days already taken to the manipulator section. 40 km from Moscow. Up to 50 km free. Set to the correct lighting, 12V, for the sake of security (that is, for the most part and my choice). Climb comfortably (with an increase of 177), wide boards and impregnated. Quality was a pleasant surprise.

Disadvantages: Not found.

More on Otzovik: http://otzovik.com/review_4501166.html

Note! The owner has decided to carry out installation work on their own, in the spring. But gained a whole set of winter that helped him get the seasonal discounts from the seller.

Arhimedius, St. Petersburg, Piccolo: Advantages: Reliable underground structure. Available cellar of plastic to give, good storage for fruits and vegetables, especially salt and compotes. On the shelves fit 240 three-liter cans, plus suspensions in shopping bags. Light well organized: one lamp on top of the ceiling, the other covers the lower part of the cellar and installed in the center. After the installation of the underground Cellar top made of heavy goods plitu- foundation under the shed. In any case, the bottom and side cellar filled gartsovkoy, an upper portion of the vertical walls and roof further have warmed Penoplex.

Disadvantages: By order of 60 days.

More on Otzovik: http://otzovik.com/review_5114674.html

From Review understand the importance of careful pre-screening. The future owner has studied not only the main structure but also equipment. He chose the best place for installation on site. With the use of reinforced concrete slab - on cellar turned out to install additional technical structure. It should be noted effectiveness of additional warming (in winter temperature is reduced without the use of a heater below + 4 ° C).

Note! The long lead time, most likely due to increased demand. This deficiency is easily corrected with the use of precise planning.

Here especially given the reviews are not too well-known brands in the domestic market. But even in these cases, consumers give the product a high positive ratings. Next, consider the product of large specialized companies that provide a wide range of products and good quality.

Plastic cellar Tingard: design, important details

The following features and benefits the manufacturer says:

• A similar cofferdam made of steel becomes rusty after 4-6 years, this structure maintains the integrity and good appearance for over 50 years.
• You need to spend about 5 thousand to create the same storage mode using household refrigerators. kWh per year - compared to the model of "1900" series of medium size.
• The minimum thickness of seamless plastic cellar Tingard is 15 mm. This, together with the exact calculation of stiffeners provides high strength.
• The manufacturer claims that does not necessarily make podsypku of sand and cement. However, anchoring to the concrete slab will need with a high level of groundwater.

The last point explains attractive price Tingard cellars. If we consider the total cost of delivery and installation, the cost will be less than some competitors' counterparts. Relatively light weight allows to perform unloading on inclined runners, without using a crane (hydraulic manipulator).

As part of the marketing events cellar Tingard plastic can be bought at a discount. The manufacturer offers a separate accessory free shipping with no pre-payment and other benefits. But along with the "plus" should be noted and "cons." The main drawback can be called a meager assortment:

What good is a plastic cellar Triton, you should pay special attention to

Under this brand offer cylindrical and rectangular structures made of polyethylene sheet (thickness 13 mm). Welding is carried out with modern equipment to ensure high quality welds. The standard assortment of products with dimensions from 120h120h150 400h200h200 to see. The main advantage is the ability to custom-made designs with unique dimensions. Of course, such a project will be more expensive than purchasing a serial product.

These plastic Cellars reviews of the owners, mostly - positive. But it should be noted less strength parameters compared to the brand discussed above. There is used a smaller wall thickness and welded.

Plastic cellar Titan: high strength and other benefits

It will be appreciated the positive aspects and features of construction that lead manufacturer:

• Cellar create using welds that allows to offer a wide range (the rectangular dimensions of the models to 120h120h150 600h200h200 cm).
• Used to strengthen the strong ribs.
• Metal reinforcements for the screed on the bottom part of the base set.
• As the largest plastic pogrebakrysha reinforced metal Channel bars.
• When creating a fundamental component used quality food grade polypropylene.
• In a typical set of permissible change according to the customer.

The feedback on the cellars of plastic this brand positively noted the internal weighting. The installation does not need to do the foundation of reinforced concrete. This simplifies work operations. An additional advantage - a strong and durable floor that retains the integrity of the rough handling.

How to buy without error plastic cellar: price, model, purchase conditions

A careful study of the specific project at the average user there are many additional questions. Do I need to buy a cellar of plastic with insulation, or to create a layer of insulation? How to install wiring in the polymer body? How to fix hinges on the doors?

Not necessarily to decide these and other practical problems. Many of the answers are already provided for in the designs, standard. Some manufacturers provide detailed installation instructions, offer their own installation service with formal guarantees. But in any case, after the approval of individual requirements it is necessary to clarify the price of plastic cellars to testify:

Photo	Brand / model	Dimensions of the core, see	The wall thickness, mm	Price, thousand. rub.	Features
	Triton / cylinder	180h230	13	95-110	Polyethylene, welded joints.
	Triton / pryamou golny	250h150h 200	13	155-158	The desired throat height can be set in the order (from 30 cm or more).
	Titanium	250h150h 200	10-15 (in different models)	156-159	Food polypropylene, welding, weight - 320 kg.
	Tingard / 2500	240h190h 260	15	189-207	Food polyethylene, seamless durable design. Weather station, ventilation, lighting - at no extra charge.
	Topas / PP Long 4	200h300h 266	—	215-230	—

For an objective analysis of the finished price of cellar plastikanado find or calculate the useful volume. Also specify:

• Composition standard.
• Convenience shelf placement and space.
• The need to purchase additional products to start normal operation.

Important! Checks should be carried out carefully to avoid excessively high price of the box for plastic cellars, other unexpected costs.

Does it make sense to perform assembly operations with their own hands?

Below is a step by step guide structure installation side entry. It will help to evaluate correctly the feasibility of the installation of plastic cellar with their hands:

Photo	The sequence of actions with comments
	To speed up the excavation and careful handling heavy items can be rented (together with an experienced operator) the necessary equipment.
	Pit digging in accordance with the original markings made plot.
	Installation be cellar plastic with a large volume (18 m. Cube). Creating a respective recess, even in soft ground would be too difficult when using hand tools. For this reason, we have to use the excavator.
	The exact dimensions of the pit is determined based on the existing drawing documentation, the manufacturer's recommendations.
	The excess soil is removed from the construction site.
	Footprint plastic design when such volume is 9 sq. M. For more coverage of the extrusion cellar groundwater used reinforced concrete slab weighing more than 2 tons.
	Cramped conditions in the area are forced to perform assembly operations for the special scheme. First, the heavy reinforced concrete products dumped on soft ground blade.
	Further - excavator is used to move the plate to the bottom of the pit.
	Surplus soil removed carefully with hand tools.
	Plate put vertically aligned with the bottom of a sand bedding. Horizontality monitored by a building level.
	With the use of the crane accurately set the slab.
	Check horizontal support surface created.
	Establish durable belts for subsequent fixation cellar plastic.
	Bedding of sifted sand will prevent damage to the bottom.
	Doing excavation under the angled entrance.
	For transportation of the product is relatively easy enough light commercial vehicle features.
	Unloading is performed by the crane.
	Here it is necessary to perform the work in the "blind spot." Only highly qualified specialists it can safely be repeated.
	Cellar lowered slowly, carefully, to avoid damage.
	One advantage of the products of this producer is meshed with the bottom openings in the partitions for reinforcement.
	This concrete is poured for weight gain and increase the strength of the floor.
	Inside the factory installed three rows of shelves 30 cm width, ventilation ducts, lighting fixtures.
	Used for thermal insulation boards of extruded polystyrene foam thickness of 100 mm.
	After laying the insulation coating obtained efficiently, simplifying maintenance inside optimal temperature conditions. It should be noted that such insulation does not absorb moisture.
	Backfill operate using a mixture of sand and cement, tamp to obtain a uniform thick layer.
	In this plastic cellar installation is completed. To improve the performance of natural ventilation systems can increase the height of the pipe when in the normal performance of the manufacturer decided to "save".

The cost of professional installation of plastic cellar

The technique was examined with the assistance of experienced professionals and technicians, to show the advantages and opportunities of qualified services. But the installation of plastic cellar will be cheaper if you perform certain operations on their own. The main limitation is the severity of the basic design. But some compact models weigh 140-160 kg, which allows you to perform certain movements manually.

Installation of the last table in the cellar of plastic turnkey expensive. It should be understood that the special lifting equipment in this case is necessary. Product weight is about 900 kg.

For more useful tips and conclusion

These prices correspond to market conditions at the date of testing. It is necessary to clarify the data to make accurate purchasing decisions. Should pay attention to seasonal discounts and relevant marketing activities. For a correct analysis comparing comparable parameters take into account the thickness of the walls, the official guarantees and other important details. Be sure to add in the calculation of transport and installation costs.

To enhance the objectivity - leave personal recommendations in the comments to this article. Ask additional questions to get qualified answers by specialists.