For decoration, operated under conditions of high humidityUse PVC panel, dimensions and design of which allows to generate a presentable surface with the desired pattern. This finishing material is relevant for the balcony, bathroom, the toilet, food and corridor. With it, not only inside the finishing may be performed, but also outside the house. We offer to meet the distinctive features of PVC products and their main sizes.
Read article
- 1 Scope PVC panels
- 2 Variety of PVC panels for other purposes
- 3 Types of panels by the method of compound
- 4 Advantages, disadvantages, and properties of PVC panels
- 5 How to choose and buy quality PVC panels
- 6 PVC panels: dimensions, form of release
- 7 The main types and sizes of PVC ceiling panels
- 8 The main types and sizes of PVC panels for walls
- 9 Characteristics and dimensioning of sandwich panels
- 10 Features of PVC panels for ceiling, prices, catalogs
- 10.1 Prices and sizes of PVC panels for ceiling
Scope PVC panels
This finishing material not fear moisture. It is widely used for decoration of walls and ceilings in rooms with high humidity levels. With it, finishing is performed shower, pools, bathrooms.
Sufficient frost makes it possible to use the panels in the design loggia, balcony in an apartment or in a private home terraces. Since the material is environmentally friendly, it is possible to use for residential premises. Easy maintenance (easy to wash stains formed) makes PVC panels relevant to the finishing barns.
Plastic slats are relevant not only for residential premises. With their help, the walls and ceiling are made in the sales rooms and office spaces. In some cases, products are used as decor heat and soundproofing any window slopes.
Variety of PVC panels for other purposes
This finishing material is widely used for decoration of the walls and ceiling. First have higher strength characteristics, while the latter have a lower weight. When you select should pay special attention to the appointment of a model you like.
Attention! PVC panels for wall and ceiling are not interchangeable.
Wall Model 2.5 ÷ have a length of 6 m and a width of 25 ÷ 30 cm and a thickness of 6 ÷ 10 mm. Given that the ceiling in the operation is not subject to mechanical stress, ceiling products perform more subtle. Their dimensions 6 m ÷ 10, 25 ÷ 30 cm and 4 ÷ 5 mm, respectively. Manufacturers offer products with a matte, glossy surfaces, and lacquered.
Using PVC as a finishing panel material can be dispensed from the pre-preparing the substrate. Mounting can be performed without the use of special equipment, which greatly expands the possible area of use.
Types of panels by the method of compound
Manufacturers offer slats with different character of the compound. Introduced range of products can be divided into:
- seamless type;
- chamfered (dummy joint);
- with an embossed surface.
Seamless products are relevant for the design of the ceiling. Due to the special constructive execution during installation, they are located close enough to each other. Keeping technology installation work, it is possible to make the connecting line is almost negligible.
Attention! Substandard PVC panels due to thermal effects may be subject to deformation changes. This cause changes in the shape formed by the coating. It is necessary to carefully select the material.
PVC panels have a chamfered recess in the decorative characteristic places slat compound. Such products are sometimes called rustovymi. Most often used in the design of the ceiling.
The panels with an embossed surface are relevant in the design of the walls. Special finishing greatly increases their strength characteristics and durability. This is reflected not only in the appearance of the formed surface, but also on the selling price.
Advantages, disadvantages, and properties of PVC panels
Plastic decoration material PVC in all sizes have a number of indisputable advantages:
- Excellent light and moisture resistance to environmental resistance. Formed coating is capable of for a long time to maintain its presentable appearance.
- Mechanical strength with a relatively small weight of the slats.
- Heat and sound insulation.
- ease of machining. To form the desired circuit can use a standard set of carpentry tools. When necessary, individual panels can be glued together and to weld.
- Environmental Safety.
- Compliance with fire safety requirements.
- Versatility. PVC panels can be used for decoration for various purposes.
- Different sizes. Availability of standard sizes can be used for decoration of the walls or ceiling products of different sizes or the same size, but with a different pattern.
- A wide range of. Manufacturers offer a different texture and colors, allowing you to find a suitable option for any interior.
- Presentable. If desired appearance formed coating can be modified by causing the surface of the adhesive film or paint. The possibility of applying solvent or screen-printing allowed to become owner of a unique material. The availability of additional extra decorative accessories allows us to emphasize the contours of the individual slats.
- Long service life, which is 20 years.
- Easy installation. Products can be mounted not only strictly vertical or horizontal, but at any angle. Installation can be done in-house.
When the indisputable advantages of the material there are some drawbacks. Sometimes the use of PVC panels can be limited fire servicesIf the premises are evacuation routes in case of an emergency. During combustion PVC forms acrid smoke.
How to choose and buy quality PVC panels
Deciding to buy a PVC panel, you must first decide on the appropriate model. Given the large assortment of products offered by manufacturers in the selection process should focus on the main purpose of the premises. Based on the selected stylistic roomIt will be easier to opt for a particular model.
In the process of buying, make sure that all products have a perfectly flat surface. Only in this case formed coating will have a presentable appearance. All slats must be from the same party, so that they did not differ in color. Better to make a purchase in a specialty store.
If you have not yet decided on the appropriate model, we suggest to see the photo of PVC panels interiorTo make it easier to make a choice
1 of 6
PVC panels: dimensions, form of release
The thickness may be 5 mm or 8 ÷ 10 mm. Under various data vendors offer moldings, having a standard configuration and dimensions. The dimensions of the plastic panels depend on their release forms. Manufacturers make battens 3 m Y wider panels length may be 2.6.; 2.7 or 3 meters. Some manufacturers offer a material of up to 6 m. Such a length sufficient for wall design in a room with no horizontal seams. The width depends on the form of the release:
- Wall paneling. Width 10 cm. Manufacturers offer a wide slats with a standard lock, sometimes referred to as Europeans, and with a narrower (polka). In constructions with a double profile width increases of up to 12.5 cm. However, this material has found limited use. Colors lining may be different. However, the most widely used product in white;
- Panel. The width may be 15 ÷ 50 cm;
- Sheet. Width 80 ÷ 203 cm with a length of 150 ÷ 405 cm. The thickness of the sheet can be up to 30 mm.
The main types and sizes of PVC ceiling panels
When choosing a plastic profile for a ceiling, you should not only pay attention to the appearance liked the material but also to correlate its size with the configuration and dimensions of the room. Should give preference to a standard size, which will help minimize waste. So, if the ceiling in the bathroom has a width of 1.5 m, often choose PVC ceiling panels having a length of 1,5 ÷ 3 m. By using lamellas, whose length is a multiple of the length of the room, it is possible to reduce the number of butt joints.
Stucco often performed using products having a length of 2.5 ÷ 4 meters and a width of 10 ÷ 50 cm. Quite popular wall paneling of standard width and profile. Sizing depends not only on the size of the room, but also on the shape and location of lighting fixtures.
The main types and sizes of PVC panels for walls
For registration wall material is selected from polyvinyl chloride, having a width of 0.5 ÷ 2.3 m and a length of 4.05 ÷ 1.5 m. The thickness may be 1 ÷ 30 mm. In the first case the substrate must be properly prepared.
Dimensions PVC panels for walls depend on the particular design of the room. If using them is scheduled to perform finishing only part of the wall, choose a material with short length times the height of finishing. profile shape may be different, but the most popular sheeting.
Attention! When using large-size panels can greatly simplify installation.
Characteristics and dimensioning of sandwich panels
Demand in the design of the walls. increased value differ, showing an attractive appearance and high mechanical strength. With their help, often enough built septa and drawn up slopes.
The dimensions of the sandwich panels are quite different. Manufacturers offer a material having a length of 3 m and a width of 0.9, 1.15 and 1.5 m. The standard thickness of products is 1, 2.4, 3.2 and 4 cm.
The main advantage of PVC sandwich panels is highly resistant to external influences. Formed coating is able to serve at least 20 years.
Related article:
Decorative panels for interior walls. In the article we consider the basic types of panels and features of popular models and producers, the correct selection criteria in areas with special climatic conditions, useful advice.
Features of PVC panels for ceiling, prices, catalogs
Ceiling panels compared to the wall have a smaller weight. By the strength characteristics of such material is not increased requirements, which affects the price of PVC panels. Manufacturers tend to reduce the weight and constantly expanding range.
Attention! Increased brittleness of the material increases the requirements to process the installation work.
Prices and sizes of PVC panels for ceiling
To make informed choices, it is worth pre-acquainted with the assortment offered by different manufacturers, and the distinctive features of specific models. When you select should take into account stylistic design of the room. Please find the size and price of PVC panels for ceiling, which are in steady consumer demand:
| Name | The size | Average price, RR / pc |
 | 250×2700×8 | 500 |
 | 250×2700×8 | 350 |
 | 250×2700×8 | 190 |
 | 250×2700×8 | 210 |
 | 100×3000×9 | 20 |
 | 250×2700×8 | 190 |
Thus, the sheet panels PVC is widely used in the design of the walls and ceiling. Share in the comments Photos of rooms if you also prefer this decorative materials.
