Infrared heaters with thermostat to testify

For heating autonomous houses use different technologies. In this case, acceptable is a relatively inexpensive option. The approach is simple, unpretentious technique which is not difficult to install and dismantle. Highly valued reliability. These criteria are consistent with infrared heaters with thermostat for questioning. The article talked about how to choose the equipment in this category with no errors from a wide range of offers of the market.

General information on the technical means: principles of operation, compared to alternative solutions

The myth that infrared heaters harmful to healthIt is based on misconceptions about the principles of the art search. Radiation in the range corresponding to emit lamps Tungsten, which perform clock function without adverse effects on human. It is used by doctors for healing physical therapy. Of course, on a sunny day, you can get heat stroke, or damage the skin. But this only confirms the validity of the assertion of a moderate attitude to various external influences. If you comply with the rules, then a visit to the beach will be complemented by a beautiful tan and positive emotions.

The figure shows a harmless range in which most of the work domestic heaters. With a length of 3 microns and above the wave is not able to penetrate deeper into the skin.

It should be understood that only the correct application infrared heaters can prevent negative impacts:

• These products are installed with the performance of the manufacturer's instructions. Ceiling model, for example, at a certain distance from the floor (at least).
• Radiation is not directed to seat, chairs, Other long-stay zone of people.
• Do not look at the radiator, so as not to damage the retina and lens of the eye. Here too it is a fairly prolonged exposure. There is no need to hide heaters specifically for the opaque screens.

Not difficult to guess that the observance of the elementary rules eliminate all risks. However, for fairness should be noted the validity of this claim only to the really high-quality equipment, the parameters of which are confirmed by official certificates.

The figure shows that the radiation heats than air, and the floor. This allows for harmonious thermal distribution layers (hot - at the bottom, and cool - above). Limited work area includes the economical consumption of energy resources. This approach is particularly advantageous for large rooms.

A significant advantage is a very fast preparation of the desired result in this embodiment. The use of convection radiators It is more inertia. It takes time to warm up the entire volume of air in the room. Heat flows move intensively raises dust and pollute the atmosphere.

However, this technique has several advantages compared with stationary radiators. It is inexpensive. It can be taken away from the country at the end of the season. Aimed a jet of warm air temperatures in a small room rises quickly.

But here it is necessary to revert to the infrared radiation. To improve the efficiency manufacturers use an open helix, and other elements with a very high heating work surfaces. This is what may be unsafe. When the temperature rises over 780 ° C + emission spectrum shifts to shorter wavelengths, less than 2 microns. He is able to penetrate the epidermis and subcutaneous tissue to a depth of 4-5 cm, which is not safe for the human body. An additional problem is the combustion of dust particles, air pollution, odors and noxious impurities.

Different types of heaters: the technical and operational characteristics

After studying alternatives need to go to the detailed study of the range of techniques in this category. Various models of infrared heaters to testify can be assessed by various parameters. But in any case, keep the following data:

• Reasonable cost. On such a real estate object is necessary to use low-cost products, so as not to worry unduly about things intact.
• Easy to install. This requirement is also understandable. No sense to save when buying, so you spend your money on professional services.
• For mobile operation mode advantages are: light weight and ease of moving to another place.
• Friendly control and automatic maintenance of the specified mode reduces the load on the user.
• Lovely appearance does not distort the interior harmony.

In any case, useful not too burdensome maintenance and reliability. The latter factor is particularly important if you plan to permanent installation of equipment.

Electric infrared heaters: easy installation, and other advantages

The above criteria corresponds well to this type of technique:

• For the installation of the equipment We do not need professional knowledge and special skills. Apparatus power of about 1 kW are connected to the two-phase 220 V without improving parameters typical wiring.
• A fairly simple design means low cost without expensive accessories.
• Even simple modifications these days equipped with convenient for ordinary users control mechanisms.
• Equipment in this category are available with a lightweight body. It does not apply oil to fill in some convection heat sinks, and other heavy components.
• In the electric heater for cottages this type does not have moving parts, which is passed the service life, provides quiet operation.
• The relatively small temperature working surfaces increases safety during operation.

Here, the infrared radiation is produced by a spiral of a refractory material, which is enclosed in a protective envelope made of quartz glass. This design prevents adverse effects on the air in the room.

The above pictured model demonstrate the advantages of film technology. Flat conductor radiates effectively, but not heated excessively. Special lines laying device is able to operate at break one or more electrical circuits. Products with a compact, lightweight, inexpensive. They can be fixed in the right places as decorative panel.

This solution protects against adverse external influences. Damage will not occur even if mistreated. Polished steel reflector improves the directivity of the radiation flux increases efficiency.

Important! To better understand the advantages and disadvantages of different designs, it is necessary to examine the technical features, reviews of the infrared electric heaters. A comprehensive analysis will provide a list of individual requirements, which is useful for the correct choice in the shop is really the best option.

Related article:

Many owners of country houses and apartments want to know how to choose cost-effective new generation of electric heaters. To make the right choice from the variety of devices on the market, examine the materials of our articles.

Special features and disadvantages of gas heaters to give a bottle

gas heater for the cottages can be bought to maintain a pleasant temperature in the open air and cool evenings. It can be alone on the move veranda, at summerhouse. Not to connect electric lines and gas lines are necessary. The required amount of fuel stored in the tank desired capacity.

As can be seen in the photo, some models can be used not only for its intended purpose. Here, they additionally perform the function of spectacular design elements design composition.

Such models can take with them when leaving for a picnic in hiking. They can be used inside the garden, to move into the living room and utility room, if necessary.

The figure shows that the mixing chamber in this model reliably separated from the stainless steel housing and other components from the surrounding space. Usable heating is no open flame, but indirectly, through a special plate. Here it is made of heat-resistant ceramics. This material does not pollute the atmosphere during all modes of operation. It does not spoil the corrosion and other external influences for a long service life.

It should be noted positively good economic performance when using this type of technology. However, we must not forget that it is necessary to use gas equipment with the strict observance of safety rules:

• Monitor the status and cylinders, valves and other parts in accordance with the instruction manual.
• It is not allowed the dismantling of grids and other safety elements.
• Manufacturers forbid the use of infrared heaters for drying shoes and clothes that cover them, set too close to flammable things.
• Indoors, it is necessary to provide sufficient fresh air and the removal of exhaust gases.
• Refueling tanks must be done only in specialized workshops.

Important! The possibility of using gas appliances do not need to be excluded. But given the high security, low price and ease of management will continue to be considered only electric heaters. They are well suited for summer conditions with a comprehensive assessment of all the relevant parameters.

Related article:

Let's face it, What is better to buy a gas heater for cottages? Reviews, opinions and recommendations of experts, and information about the most popular models, which you will find in this material, will help to make the right choice.

Where and how to establish the sources of heat

Such universal infrared heaters for giving can be attached to walls and ceilings using appropriate brackets and suspensions. Using a suitable base, create outdoor embodiment. In the following sections of this article examined various options for installation of equipment and specialized models.

The use of an infrared heater with thermostat wall

Installation of heating equipment on these parts of the building structures is a common engineering solution.

Considerable age range confirm the large size, open a "window" of the radiator. More recent articles listed below. However, it should be noted that to give such a product may well be the best option. At a minimum, you should expect a lower price. The long test in practice, also deserves attention. The "old" designs eliminated various minor deficiencies identified owners during operation.

Simply (compared with the previous example) The operation of the infrared wall heater. Reviews of the owners showed good protection heaters and reliability. Flat glass panels do not absorb odors, easy to clean from pollution.

Floor models: the range and specifications

Products in this category is set on a firm foundation. This implies the possibility not to restrict too much weight, a more powerful heating elements.

Support with the wheels disconnected, if necessary. After this transformation unit turns into the flat wall model.

Benefits and proper use of ceiling heaters

When properly installed, a comfortable feeling is obtained without heating the entire volume.

This equipment safely and special precautions can be used in rooms with wood trim. With this arrangement does not reduce the equipment working space volume.

Reviews Ceiling infrared heaters confirm good technical characteristics of modern models. But it should be noted that at high altitude is more difficult to remove dust and other contaminants. Stationary mounting option and in some situations will not be the best solution.

How to use the thermostat in heating systems and individual devices

To understand the need for appropriate equipment, it is necessary to list the tasks:

• This special device automatically switches the heating elements.
• In the modern version, thermoregulator infrared heater well adapted for autonomous operation. It can be used to warm the cottage in advance before the arrival of the hosts.
• It is useful for long-term maintenance of a temperature level above 0 ° C.

Depending on modification, the device detects the ambient temperature, or parts of the heater. The photo shows an electronic thermostat with a large liquid crystal display. It can be programmed with the specific wishes of the user for a long time interval. It is also permissible to use standard functions: "day" night "," switch on a signal from a mobile phone. "

Important! Connecting other models operate in accordance with regulations of the respective manufacturer.

Clarification of the requirements for the right equipment

This diagram shows the range of infrared heaters with thermostat (built-in and external) of a certain brand. However, the same technique can be used to test a similar product from another manufacturer:

• First, define the parameters of the heated parts of the object (indoor and outdoor areas).
• Further clarify the need for a landline / mobile equipment.
• It should take into account the height of the ceilings, ventilation mode and other features for the correct calculation of the required power.
• Choosing the appropriate option installation.
• Notes the need for accuracy of temperature control.
• Establish permitted to purchase price range.

A calculator for calculating the required power of the electric heater

Modern infrared heaters with thermostat for questioning: price, technical parameters, the acquisition without mistakes

In addition to the above criteria must take into account the real possibilities of self-assembly work, the aesthetic characteristics of the premises. The next review will help determine which heater is best for cottages and economical. But the prices listed are valid only for a certain date, they are only suitable for comparative analysis. Operational verification of actual data must be supplemented by a list of individual requirements.

Photo	Brand / model	The power / heating area, W / m.	price, rub.	Notes features
	Ballu / BHH / M-09	900/15	640-1680	Equipment equipped with protection devices against overheating moisture. Mechanical control. Halogen heating element.
	Almac / IK11	1000/20	3380-3500	Ceiling. Several color options.
	Mister Heat / Termik C-0.1	100/-	1260-2020	Built-in overheat protection, a mechanical control unit.
	Polaris / PMH 2095	2000/-	5260-6290	Overtemperature protection, with support wheels.
	Ballu / BIH-LW-1.5	1500/25	1530-2480	The remote control can be mounted on a wall, ceiling.
	JARKOFF / JK-9002	500/-	1240-1410	membranous.
	Polaris / PKSH 0508H	800/20	1980-3790	Carbon fiber heating element.
	Vitesse / VS-870	800/-	5310-6450	Electronic control, a carbon heater, a remote control display.
	Electrolux / EIH / AG-1000E	1000/15	5200-5480	The combination of infrared and convective heating. Electronic controls, display.

It should be remembered that the infrared heaters with thermostat, ceiling buy better just to create a functional system of modern level. Profitable to buy all the ingredients for a project in one shop. It can count on certain benefits.

To avoid errors to the price of the infrared wall heater with thermostat must be added shipping costs, consumables and other costs for the installation work. To be objective, in addition to official data producers need to learn reviews on their favorite model.

Sofii, Perm, Almac model IR 11: Advantages: Reasonable price, energy saving, thermal effect, aluminum enclosure, silent. IR heater I liked. He does not dry the air and emits infrared rays that are good for the growth of plants. I had noticed that seedlings that are closer to the heater grew better.

Disadvantages: There is no indicator lamp, poorly thought out hardware. The thermostat automatically turns off the heater when the desired room temperature, which reduces electric power consumption, but this device is sold separately.

More on Otzovik: http://otzovik.com/review_2829939.html

veselun, Ukraine, UFO Star 1800: Advantages: Fast heats up

Disadvantages: For me, it was not acting in the best way. Yes, I felt the warmth, but only if it was directed at me. In this case, the end of the day a headache and watery eyes. If you put it in the other end of the room, the heat was not felt. That is, it heats the air is very bad. Very hot wiring.

More on Otzovik: http://otzovik.com/review_1460808.html

Aldenis, Moscow, IkoLayn PPI-08: Advantages: relatively economical, does not take place. In operation, the finned heat sink is heated to a temperature of 200 degrees. This relatively low temperature, so the heat from the heater soft. He warms primarily by radiation rather than by convection.

Disadvantages: Heater nasty crackling when working with variable frequency of about 5 Hz, and further slowing. As I understand it, the reason - in the heating and cooling cycles. The heater casing is made of steel sheet metal parts are fastened together by rivets. When uneven expansion of different parts of the heater between the components occurs and shift clicks.

More on Otzovik: http://otzovik.com/review_2430709.html

A careful study of real users opinions leads to the following conclusions:

• Infrared heaters with thermostat in the country can be used not only to solve everyday problems. They help create comfortable conditions for plants.
• If properly applied technique (direct radiation to the body) is permissible occurrence of unpleasant sensations, headaches dryness.
• electrical wiring must conform to the power consumption. Excessive overheating of networks capable of provoking damage and fire at a vicinity of combustible materials.
• Each model should be checked carefully. In the latest recall of the owner completely satisfied with the overall performance, but the unpleasant noises clearly indicate a lack of high-quality assembly.

Conclusion and further useful recommendations

Infrared heaters with thermostat to give traders offered in different versions. An extensive range of itself creates difficulties in the selection. To simplify the problem, make a list of the exact personal requirements and restrictions determined by the timing of project funding. The more thorough pre-treatment, the greater the chances of success.

For answers to further questions - use the comments to this article. Leave feedback about the technology, experience of installation and use. Productive dialogue can help the most complex plans to implement without major cost and annoying bugs.

Video - installation of infrared heater: