Dimensions washing machine: standard dimensions

Modern devices for washing is becoming more technological. Introduced automatic control, intelligent, additional modes. Taking into account all the specifics of help in the selection, but the final decision is made on the basis of the size and weight of the machine. Only a small part of the consumer knows the effect of the size of washing machines, their role in terms of work efficiency. In current practice, the separation effect on the full-size and small-size models and three types of products by weight.

The acquisition should begin with a pre-treatment: study characteristics, depending on the size of the search space, and at different points in the house. Features of the room design, as well as price - form restrictions which "screen out" for at least the third-fourth of the options. Last but not least guided by saving energy and water.

What to consider when choosing a washing machine

First determined the optimal way to install. The devices are detached and embedded: in the first version more benefits and "flexibility". Then pay attention to the size. The full-size cars have a high reliability, and small - to save space. The third most important indicator is the degree of automation.

Semi-automatic machine is gradually losing ground in the market due to new technologies. In this sense, should examine the possibility of the device and its software. Intense, fast and delicate wash, easy ironing - useful in different situations. In addition, pay attention to the number of revolutions per minute, insulation, load level. The number of revolutions per minute depends on the state of the laundry after washing - it will be drier or more humid. Noise isolation is important in the first place in the kitchen.

Class machines denoted by the letters A - G - model of the highest (A ++) class carefully wash things and save energy.

standard dimensions

The parameters differ markedly from 3 model types: front, vertical and recessed. In particular, the height of the first two species in the full-sized version of 89-90 cm and mounted in furniture - almost always up to 84-85 cm. Detached compact versions of this indicator differ to a greater extent. Usually it is 60-70 cm, but some devices do not exceed the minimum level - 40-45 cm. Products with the front (horizontal) loading differ greatly in depth.

Sometimes it is a little more than half the width. Compact wheel machines installed virtually anywhere. Units with a different type of load are varied in terms of configuration. Their height also varies between products with indices from 40 to 90 cm, but setting the width / depth for their more varied. Some models have rounded edges and a streamlined shape.

Front-loading

Such machines are:

1. Full-size.
2. Small-size (narrow, ultranarrow, compact).

Machines with front loading - the most popular option for the past 30-40 years in the world. They are characterized by a transparent door and a horizontal type of drum filling. SM front-loading reach large sizes and can be washed up to 10 kg of clothes at a time. Standard height is equal to 85-90 cm - from Full to ultranarrow. Compact is much lower - 68-70 cm, and even those placed under the sink. The depth of the conventional devices is much more than the other options. For the full-sized, narrow, very narrow and reduced modifications is - 60, 35-40, 32-35 and 43-45 cm, respectively. Width acts hallmark of compact machines. For them, the true value of 47-50 cm, and for the rest - 60 cm. As for the load of laundry, on the full-size to compact the parameters change as follows: 5-7, 3,5-5,2, 3.5-4 and 3 kg.

With vertical load

Models increasingly differ in height and overall dimensional characteristics, rather than depth variations as front. The first distinctive parameter, the height is typically 84, 85, 89 or 90 cm. Less commonly, it is at a level of 80 cm. Smaller versions are usually not higher than 66-70 cm, sometimes there are miniature with the figure of 42 cm. In modifications of vertical depth typically greater than the width - low except machines, the shape of which is "committed" to cubic.

The classical ratio of depth and width - 60 × 40 cm. Compact washing machines have parameters of 35-55 cm for the two indicators, but the smallest size - 37 × 35 cm. In models Full depth varies from 45 to 65 cm, and width - from 35 to 55 cm. Devices with vertical loading as well as the front, there are also double, t. E. with two drums. SM combination dryers are typically composed of 2 units interconnected by horizontally and have a width of 75 cm.

embed

The kitchen furniture sometimes provide module at the washing machine up to 85 cm. At the same time any compact version will fit in a standard bottom nightstand without shelves. The latter has a depth of 55 cm and a height of 75 cm. Owners just have to organize the communication. Recessed embodiments have the following parameters: depth - 553-600 mm, width - height of 580-600 mm and 750-840 mm. From furniture required margin of 50-70 mm on the first indicator, and 10-20 mm - the second and third.

Usual section below the work surface of the kitchen has a height of 820 mm, a width of 600 mm and a same depth, so some machines do not exactly fit. As a rule, embedded options in the front bottom left margin of 190 mm height and 100 mm in width - in case the unit will be installed in the cabinet, but on the floor. Some embedded design modifications under counter, on the floor, too.

Advantages and disadvantages of compact washing machines

For compact machines are more placement options. A suitable place will be even close bathroom or small kitchen. Miniature models have the advantage of design characteristics. Fully furnished, they combine the best of full-size options, even in a modern interior with its technological materials. But in fact, the arguments "for" are usually other practical criteria.

Economical - the most obvious. For compact models are also characterized by low noise operation. Small capacity offset by additional sessions washing. Disadvantages of scale models can be divided into obvious and technology. In the second case it is a question of wear parts due to compact accommodation, as well as the lack of high-quality counterweight due to lack of space. These aspects negatively affect the stability and service life.

How important is the weight of the washing machine

Weight units located in the corridor 30-100 kg, and the index is not always possible to determine the size. Product weight affects not only the convenience of transportation, but also on the technical characteristics: the heavier the device, the less it vibrates from the rotation of the drum. The basis of the total index weight make balancing elements, which add stability. These parts are put together, have at times exceed the weight lays the clothes or shoes.

Heavy counterweights, in turn, does not allow the washing machine to "walk" across the floor. Easy options of up to 50 kg are inserted into the headset without fear that there will be any damage. Machines weighing 50-70 kg are included in the average category, they usually put separately from the furniture. Devices weighing more than 70 kg is considered severe. In these there are more options for the spin speed.

Tips and advice on installation and deployment

The first step is set free from the transport of accessories: screws, staples and other things. Starting the device with redundant devices, it is possible to end breakage. The edges of the machine must have a significant margin from the wall behind - 2-3 cm in the open space and 5 - in the module for installation. Washing machines stand on legs - they necessarily regulate.

The inlet hose at an angle of not more than 45 ° to the right point of water intake from the rear and not more than 35 ° - left. In this case, if the standard hose is not enough - it is necessary to look for another. It is not recommended to organize the drainage point in the sink bath or kitchen. It is very unhygienic, especially in the kitchen area. Next to the washing machine organize storage space for dirty laundry, and cleaning / detergent. The successful installation of the device depends on the care and skill to take into account the nuances:

• under coating must withstand machine vibration;
• should leave the opportunity for the construction of communications over long distances;
• when measurements need to be taken into account uneven surfaces.

Before buying, check the unit: easy to sway the car from side to side - extraneous sounds should not be!

In standard bathroom area of ​​up to 4 m2

Full size set or separately in a corner or under the sink countertop. Compact models stand even below the sink. In the cramped bathroom of 4 m² of other options is not there. Sometimes you have to buy a sink or bath is less - if placement in the kitchen or hallway impossible. That the machine is not "walked" in the bathroom, it is possible to limit any partition. In this strongly vibrating options should be left open.

Shelves and niches bathroom too used to the maximum. Manufacturers also provided specific modules into two sections: the machine put on a vertical, and another section of the store powders and stuff. Or vice versa - 2 units horizontally, and on top - left shelf. To install two machines in close bathroom, and the apartment as a whole - this is the most convenient solution. The shower rooms without reservoirs fit any size device.

Acceptable variant arrangement in the kitchen

The machine can not be placed next to the oven - the best place would be near the sink unit or in one locker. It is necessary to comply with the 60-centimeter distance, but high-quality insulation will reduce this interval of two to three times. Selected distance from the walls, ranging from 5 mm on each side and 50 mm at the rear. The machine can stand on the floor, if it is not soft, and in which case it is covered with a sheet of plywood. Adding a solid bottom layer and facilitates adjustment of the leg-supports.

Near the site of the installation leave room for access to the drain hose. Expert opinion about the accommodation just 2 washing machines next to diverge: one is recommended to place them in one cabinet, while others believe that it is possible nearby. Some models are mounted under the kitchen table. This is much more convenient than in the headset and in terms of access, and due to the limited choice of places in the wall.
Technical details:

1. The socket must be grounded.
2. The pipe should install an additional valve, which, in turn, need to attach the inlet hose.
3. It is desirable to be available direct drain into a common drain.

conclusion

With the advent of washing machines people had more time for other activities. At the same time to find a suitable option, prepare for the installation and installation itself will have to spend a lot of effort to possible error and then did not lead to discomfort or even - in buying a new device. Among other things, stylish washing machine will be a good step in the modern interior. In addition to the classification of automatic / semi-automatic, all models of this type of technology are divided into free-standing and built. The second type has many restrictions in size, and the first - and includes conventional compact modification.

In turn, for all variants, there are 2 ways to download: the upper and through the window at the front. In embodiments, the vertical depth often predominates over width (typically 60 × 45 cm), and at the front - on the contrary (40 × 60 cm). The last type of machines is presented Full, narrow and ultranarrow models. The standard height for the washing machine - 85-90 cm, and there are a lot of modifications to the figure of 65-70 cm.