Weaving newspaper tubes, new ideas and helpful tips

The correct application of this technology is useful for creating your own hands products with unique aesthetic and functional characteristics. It should positively evaluate not only the opportunities for individual creativity. Strangers and their own new ideas weaving newspaper tubes will be implemented with minimal cost. After reading this article, it will be easier to learn the necessary skills, to eliminate errors.

preliminary procedures

The above example illustrates the potential. But do not just try to create a similar, rather complex product. technology should be studied carefully, to acquire the necessary component parts. Useful to view the completed projects.

The essence of the method lies in the fact that instead of the vines to weave the walls and other structural elements used paper. When used properly, the starting material can be made durable product. Individual parts are connected adhesive compositions. To strengthen and create the desired appearance are used primer and paint.

Tools and materials

For a specific project will need additional details. So stick to the heavy jug can be strengthened by an insert made of plastic. Inside the liquid storage sets the appropriate size bottle. However, the following items will be useful in any case.

The easiest way to use as a feedstock old newspapers. But the prints in this form have become unpopular. If there is no stock, it is necessary to apply to the neighbors, friends. Further marked features of other materials:

• Logs can be used if it is necessary to increase the strength. They are created from a dense coated paper. Tubes obtained from it too hard. They are difficult to paint in the desired color.
• Standard blank sheets of writing paper better. Here, the main advantage is the lack of drawings and inscriptions.
• Conveniently turn off the tube of a cash tape. But such products are expensive, so need significant initial investment.

Note! Special grades of thermal paper for cash registers become darker with increasing temperature. Such a feature is capable of forming defects during processing of woven articles.

For connecting and fastening structure parts form tubules used inexpensive standard PVA glue. Buy it cheaper in a large container.

It is difficult to work with the adhesive compositions of instant action. They too fast freeze does not maintain its integrity under deformations. If you need transparency, should pick up the adhesive suitable for assembly and subsequent operation of the product.

Bending and precise positioning of the tubes useful fine smooth wooden stick. To fold the paper, you need a spoke made of metal with a ring or other extension at one end. It is also necessary to prepare a sharp pair of scissors and a knife stationery. He quality of the edges of these tools will depend not only on the appearance of workpieces, but also ease of use.

This braid blank paper tubes. So that it remains stable, you need enough weight. In this example, light plastic bottle filled with water, and to expand the lower portion of the tape used cardboard.

Decorative and functional treatment

Here it is necessary to make certain corrections based on the specific features of the plan.

This product is more convenient to set up in advance of the prepared tubes. Them stained in the desired color. Subsequently, from the respective blanks form a pattern.

Note! If after drying tubes have turned brittle, before their installation can sprinkle water.

Before staining the product as a whole - a layer primer. It can be made from a mixture of PVA and water with a small amount clearcoat acrylic-based. The mixture was diluted to the desired consistency. The viscosity should not be excessive to perform thorough treatment slots.

On the prepared surface is fashionable to apply stain and varnish, oil and water-based paints, inks, Zelenka and a decoction of onion peel.

But the paint in such packaging is expensive. Spraying is designed to handle large surfaces. Image or different color pattern is produced by means stencil.

The dyes are applied in accordance with the manufacturer's recommendations, or on the proven practice instructions. It is necessary to perform the requirements for temperature and drying duration. Sometimes it is necessary to create several layers. Surfaces must be protected from negative external effects with transparent varnish.

Related article:

Flowers from corrugated paper with your hands. The article describes in detail how to create a cheap and beautiful flowers from crepe paper with your hands that do not fade with time and can be stored for a long time.

Creating a workpiece

Skilled craftsmen are used for their projects different solutions. Ribbons of thick paper as a flexible vine bark, also obtained cute and durable products. In Asian countries used weaving technique of very thin paper tubes. Of them create miniature decorative elements that affect the highest quality even under close inspection.

But in this article will be described in the "classical" piece.

Photo	The sequence of actions and important features
	It is necessary to prepare the necessary materials, tools and supplies. When choosing paper, consider the above recommendations. Its cut into strips of width Lot 7 to 12 cm.
	It is too long is not convenient, because of these tubes is difficult to create a high-quality weaving.
	Rolled strips, setting the needle at an acute angle (as shown). After mastering the skills you can use an electric drill. But also manually rotate the base is not difficult.
	Free area is fixed with glue.
	If necessary, the tube is coated with primer, paint, varnish.
	It is necessary to create an adequate supply of blanks, so as not to interrupt the subsequent assembly operations.

What types of weaving from newspaper tubes: an overview of typical technologies

Training should start with a relatively complicated procedure. Oddly enough, but the weaving of "rope" to learn easier than a simple option that will be considered further.

Weaving newspaper tubes for beginners step by step

The following table summarizes the features of workflow when using different technologies. For beginners step by step hack from newspaper tubes do not difficult. Precisely enough to repeat the operation, which are described in the corresponding instructions.

Picture	Actions and important notes
	The technique of "rope" is used two or more tubes simultaneously. They are intertwined with simultaneous passage around the vertical frame members.
	Each row of neatly pressed to eliminate the gaps between the layers.
	During the work line the vertical tube to get a good fit to the wall is inserted into the form.
	From "simple" woven work harder than a "rope." Here ducts do not support each other. Therefore it is necessary to use pegs, or other means available for the temporary fixing of the optimum position.
	The walls, as in the previous version, gently pressed against the base, so as not to damage the tubes and get the desired shape.
	Designated individual lengths compounds should hide. The photo shows an example of a wrong decision.
	When using this technique makes an odd number of vertical elements. This is necessary to create a harmonious pattern embossed surface.

How to make a basket from newspaper tubules steps: instruction and photo

Below is an example of weaving baskets from newspaper tubes. Photo supplemented comments that will perform the work steps correctly.

Photo	Sequencing
	Using standard techniques, a sufficient number of blanks of tubes.
	The base of the bottom can be made of heavy paper. To fix the tubes used high-quality tape.
	Top tag on the same square.
	Plaiting, you can use "the cotton" methodology.
	The surface of the lacquer to protect from external influences. Spraying is useful for high-quality processing of cavities. Brush to make a similar treatment much more difficult.
	Handles can be made from a belt. These parts are attached to the walls using special fittings.
	The finished product will be an expressive ornament interior.

Note! When creating weaving newspaper tubes, new ideas are used not only to determine the basic parts. Instead of belts can be applied on the handle of the old bags, thick rope, ribbon of dense upholstery fabric. Appearance adjustments to accommodate the selected style.

Weaving newspaper tubes cock other products with unusual shapes

This cock is not just beautiful. In this roomy basket holder can store a variety of small items.

Such products difficult to make out of vines. Paper - a soft material, so you can experiment with different shapes. To ensure the necessary strength, its reinforcing skeleton stout inner insert, primer and paint.

Weaving newspaper tubes, new ideas, examples of works

1 of 5

Important! On the Internet you can find a lot of new ideas from newspaper weaving tubes. When considering the examples should pay particular attention to the technological processes, the ability to accurately reproduce their own forces.

Related article:

Decoupage for beginners step by step with photos of the bottle.Wink talents will be easier, if you study carefully decoupage for beginners step by step. This article provides detailed instructions to help reproduce the technology in the home without any errors.

Additional recommendations and conclusions

With this video you can explore one of the ways of weaving from newspaper tubes:

But the most detailed instructions sufficient to implement the plans. To learn the necessary skills, it is necessary to take practical experiments. In this case, this is not difficult. The technology is different ability to use inexpensive materials, simple tools and improvised. With its help create beautiful and functional products that are used to equip their own interiors, give to friends. Uniqueness - the main value of these creations.