Christmas trees made of paper and cardboard three-dimensional for the New Year: the original gift and stylish decoration for the home

If you're a fan of the original gifts or planning beautiful to decorate the house for New Year, make three-dimensional tree of paper and paperboard. The manufacturing process is quite simple. Finished products may have different configurations and sizes. We propose to prepare for the holiday and meet with the options, so you can surprise your loved ones.

Three-dimensional Christmas tree made of paper for greeting cards

Despite the large range of printed products, select the appropriate postcard It can be difficult. In such a situation it is necessary to make greeting otkrytochku independently sheet having decorated first volumetric fir tree paper.

Origami Christmas tree

For the manufacture of jewelry designer need cardboard, from which you can make your five modules. The size of the squares should be chosen based on the desired size of the tree. The main thing - to make sure that each successive bit different from the previous one. This can be achieved, for example, by making larger square origami module with a side of 10 cm and subsequent - 1 cm less than the previous.

Tree is as follows:

• We add up the square diagonally and then decompose and connect the opposite corners to form a second diagonal;
• focusing on the formed fold line, one of the faces of the pyramid of the resulting plant inside;
• likewise act on the opposite face;
• fold line carefully ironed fingers;
• upper free edges on both sides toward the middle bend;
• glue receiving module to the next card using double-sided tape;
• similarly the subsequent forming elements and glue them over the previous ones.

Offer see photos, so you can find an idea for a future incarnation:

The following video describes the process of making these ornaments:

Tree of triangles or rectangles

For the formation of trees will take several squares or rectangles of cardboard (paper) having different sizes. The aspect ratio of the rectangle is better to choose 2 to 1. Prepared elements folded into halves. The upper corners of the bends down in the middle of the hand. As a result of the free edge will be the bottom. Elements of glue from top to bottom so that each next was overlapping with the previous.

Christmas tree made of paper tubes

If you decide to create a greeting card with your child, pay attention to the following workshop:

• We prepare the necessary materials and tools. Instead of colored paper for the production of Christmas trees, you can take any from the original pattern;
• cut strips of different length;
• form a paper tube, using as template a pencil;
• glue resulting elements of the cutoff line;
• glue ducts for future postcard bottom up from high to low.

If you have questions about the production of such original ornaments, watch the following video:

Herringbone for a drop-down cards

It looks nice and original greeting cards, whose tree is not outside, but inside. In the opening of it formed volumetric figure. To make such a unique gift can be as follows:

Illustration	Description of the action
	Prepare a green double-sided colored paper, cardboard, scissors and double sided tape. The latter can be replaced by glue.
	Mark up a sheet of colored paper, forming rectangles, the length of which is equal to the length of the paper sheet, and width - of 7 cm and less than 1 cm increments.
	Accordion folded from sheet. Each fold has a width of 1.5 - 2 cm. Folds perform the same size
	The latter folds glue double sided tape with which the elements are attached to the card.
	Fold in half the resulting accordion. Place them along the fold line cards and is pasted to both sides at an equal distance from each other. On top of the Christmas tree can be glued starBy cutting it out of colored paper.
	We check their work, opening and closing the card.

How to make a box in the shape of Christmas trees out of cardboard or heavy paper: workflow

On New Year's Eve is traditionally chosen not only the present, but also the packaging. The packages, which show themed paintings can already be called traditional. They can accommodate large enough gifts. If the gift of a relatively small size can be made box of cardboard. In this case, the packaging itself will look like a gift.

Offer to meet with a master class to learn how to make a box in the shape of Christmas trees out of cardboard:

To help you make the box with their hands, we have collected for you the templates by which will be easy to make original New Year's package:

Three-dimensional Christmas tree made of paper and cardboard for interior decoration for the New Year: the procedure for the manufacture of their own hands

You can use flat figures as Christmas tree decorations. They can become a serious competitor for conventional balls. If the accommodation trees There is no place, but I want to create a Christmas mood, offer to make the forest beautiful woman with their hands out of paper. This can be done in different ways. How - described below.

Three-dimensional Christmas tree cone on the basis of their own hands

Most often made with his own hands three-dimensional tree on the basis of the cone. Durable and hard cone is used as the basis for a variety of decor. The result is a beautiful and stable product. Let's look at how it can be done.

From what and how to make a cone tree: advice of our editorial

To be given a strong and stable, and it can be easy to glue different decor, not immediately make out of what to do for the cone tree. Type of material used will depend on the desired dimensions dimensional figure. Most often used for this purpose ordinary cardboard A4.

If you want to become the owner of a Christmas design larger, you can use Whatman. From it you can make a few small figurines.

Tip! In the absence of paper and cardboard glue together several newspapers. After complete drying of the adhesive composition of them have gained a strong and reliable cone.

We offer watch the video to find out in detail how to make a cone Christmas tree made of cardboard:

Final cone trim fringe of the strips, circles or paper pigtails

Preparing a base, to start its decoration. If the decor selected fringe, trim as follows:

Illustration	Description of the action
	Preparing cone mark up the sheet of corrugated paper, which is manufactured from a fringe. The width of the strips should be about 4 cm.
	Of chopped strands forming fringe, leaving at each edge of 1 cm.
	Glue lower tier so that the fringe performed at 2 cm.
	Successively glue remaining elements completely filling cone. Nice make out the top. You can perform dressing if desired.

Instead fringe to decorate the cone can be used slices, cut from paper. We are doing it in the following sequence:

Illustration	Description of the action
	Fold a piece of paper in multiple layers, and using as a template coin, draw circles of two sizes.
	Carefully cut into circles of two different sizes and colors, trying to reproduce as accurately as possible the contour of each element.
	On the lower edge of the cone and begin to apply the adhesive to stick circles, alternating large green with a little yellow.
	Starting from the second row circles displace so that the element was located above green yellow, and over the yellow - green.

Attention! Volume figurine, decorated with circles, does not require additional decoration.

Instead fringe and circles to decorate the cone can be used braids made corrugated paper. We offer watch a video, which clearly shows the process of making such decorative elements:

Christmas trees out of cardboard for 4-8 blades

Rather simple embodiment, involving cutting the pattern of cardboard several parts which are then joined together in a single figure. The more elements, the more luxuriant tree looks.

If you decide to make a three-dimensional figure, we have prepared a special template for you:

Volumetric herringbone in the art vytynanki

Similar products themselves look quite original. Adding small decorations in the form of beads or ribbons, you can create a work of art. We offer to meet with the process of creating such Christmas trees in more detail.

Patterns of paper for the tree: ideas for inspiration

To become the owner of such a beautiful figure, not necessarily draw template to cut trees out of paper on their own. You can use ready-made solutions. The complexity of these figures vary considerably, but the more minor elements, the more beautiful will look like the final result.

We have prepared for you from the paper templates that you can begin today to the manufacture of Christmas trees in the technique vytynanki:

Instructions for the production of

For the manufacture of such jewelry should prepare small scissors, better nail or knife stationery. The second option is preferred. Prepared template laid on a wooden board and carefully cut out all the small elements.

Tip! If you want to get as herringbone luxuriant, for its manufacture, use more than one element, and more than two.

Cut parts are put together and connect. This can be done in two ways, depending on the desired result:

• fold in the ground with the help of the thread;
• lace the edges with an adhesive. For such a figure will require four parts.

Modular Christmas trees on the web

If cone design seem too bulky, you should pay attention to the decorative elements on the web. They can be made in different techniques, some of which we suggest you meet.

Christmas trees, crafts from paper quilling technique

To manufacture pieces necessary to prepare a sufficient number of elements. Their shape and configuration will depend on the desired size of the future product. Rod wrap crafts such as paper, which is manufactured from tree or a black paper. After this will only connect structural elements.

Tiered tree circles

To get a beautiful decoration, cut into circles of different diameters. Their number will depend on the height of the product. For small difference in diameters of adjacent circles may be 1 cm. For higher with a large number of elements should be selected smaller step. Thereafter, each member is mounted on the rod, starting with a circle of larger diameter and ending with the smallest.

Christmas tree from paper fans

Three-dimensional model on the web of paper fans are manufactured in the following sequence:

Illustration	Description of the action
	We manufacture of corrugated paper seven rectangles of various sizes. In this example it is 25 × 20, 21 × 17, 17 × 14, 14 × 11, 11 × 8, 8 × 5 × 5 cm 2. Last size is not required.
	Fold fan. The smaller the box, the party has to be a fan. In the largest is 2 cm, from the smallest - 0.5 cm.
	I cut the little corners of the folded fan and fold it in half. On the one hand we connect the side faces using a stapler.
	Putting together two semicircles of the same size for the circle. Midway associate thread.
	The resulting elements successively strung on the rod.
	Set Christmas tree resulting in a vase or candle sticks in order to ensure sufficient stability.

Christmas trees from cardboard rolls from toilet paper

If you have gathered a large number of plugs of toilet paper - do not rush to throw them out. They may be required in the manufacture of crafts for the New Year. Enough to wrap each beautiful paper or just paint.

Share in the comments, if you are making a Christmas tree out of paper for the New Year, and what variant is given preference.