🏢 What can be done from LSTC: advantages and disadvantages of the material

On the technology of construction of houses in record time I heard almost everyone. To build from the ground up to finishing with the use of modern materials in average it takes about two months. Most of the houses erected by a thermal profile. This material has properties not inferior woodAnd in some cases even surpasses it. Such buildings are called structures of LSTC, which can be made of this material, as it is to choose the right, let us consider in the review HouseChief edition.

LSTC-design - what it is and what it consists of

Complicated at first glance, the reduction LSTC is very simple and easy thing - the steel structure in the sheet format. The basis profile is made of a small thickness. If necessary, the material can buckle so that it took the form that is required for the construction, for example, the shape of P. In metal beforehand provided small holes, through which can provide the best heat retention. The material is very cheap, lightweight and durable. It is highly probable that in a few years it will supersede brick, logs and blocks.

What can be done from LSTC: Areas of application of designs

Use the sheets in virtually all types of construction work:

• in manufacturing plants;
• the construction of low-rise residential complex;
• construction of commercial stores;
• construction of trade pavilions;
• premises for breeding animals, farm;
• construction garages and hangars.

Build structures takes place very quickly, because you can not use special equipment, and most importantly, does not require the construction of a strong core foundation.

Production of light metal constructions: general information

LSTC constructs produced from special steel coated composition from corrosion. It is necessary to increase the service life. In addition, further, various elements for compound, Whereby the assembly is very fast. There are several standard sizes of thin sheets.

Note! Today LSTC production in Russia is engaged in 26 industries. All of them have earned the trust of consumers by supplying good quality products.

Light steel thin-walled structures: basic operational characteristics

Advantages of the sheet:

• weight less than that concrete block or brickAlmost 10 times. Stress on foundation greatly reduced, as well as the cost of its construction;
• internal floor area is increased due to the fact that the walls are substantially thinner and occupy less space;
• good ones thermal insulation characteristics. It saves about 60% of energy, since include heating at high power is not always necessary;
• dew point in such a structure is driven out of most buildings, so the freezing of the walls as possible.

Pros and cons of the construction of buildings of LSTC

In order to become familiar with all the ins and outs of the material LSTC, you can explore the table presented edited House Chief.

Despite the fact that a lot of advantages, disadvantages also exist, and someone they can seem very significant. In studying the reviews of LSTC can detect a tendency to the fact that people are very difficult to fix in the room and the frame pictures, TV set. The material is very fragile, so the use of nails is not recommended.

You can study the photo examples of houses from LSTC designs.

1 of 4

LSTC designs: house designs, other buildings and their value

In the absence of a clear, well-composed project, To begin construction of structures of LSTC impossible. This is not just a box, and the room, which also must be located the main communication. This project is very complex, and to put it into practice, will have to pay professionals for help with the work.

The cost of ancillary facilities projects and private homes

several ready provided for educational purposes projects:

When you create a small project architect and draftsman services come relatively cheap, but a large amount is required in order to hire engineers and designers. The average cost ranges in the following terms:

• decision, the architectural project - 20 000;
• complete construction drawing - 15 000;
• Work on the construction - from 200 rubles per 1 square meter.

When planning the budget for construction, should be based on the above figures, however, the price may change in a big way.

Industrial buildings and the value of their design

If you make a model for the construction of the project production hall or warehouse, you will have to pay much more than the living room. The average cost ranges from 300 to 500 rubles per square meter. However, the customer receives not only the project itself, but also the official building permit.

Designing of a commercial or sports purposes: the average cost of

The total cost may vary depending on the area of ​​the room. To save money, you can buy a ready-made project, but in this case there will be no room for creativity and new ideas. However, it really helps to save a large amount. Ready for space project for an office or a shop with an area of ​​100 m² will have to pay a total of 40 000 rubles.

Building a garage of LSTC own hands: design, assembly, installation of the roof

Without the use of special, professional equipment, to build a house does not succeed. You can build a house on their own, but only with a set piece and some tools. The most important thing in the work - not to damage the thin sheet. Require metal shears.

Project Future Garage: buy or order

When designing often arises another problem - to create a small load on the profile of LSF, it is necessary to have accurate calculations and the finished project. If you do not use the basic rules of construction of a stacked like a pack of cards.

You can take a risk and use ready-made designs from the Internet to save money.

Important! These drawings - not a guide to action, and do not guarantee that everything will turn out. You can use them as an example.

If you do not overload roof and do everything qualitatively, as well as seek the advice of architects and engineers, it is possible to avoid blunders, due to which all the money and power will be lowered to the wind. it is not recommended to take risks in the construction of a residential house.

Preparing the foundation for the future garage: necessary actions

Garage building for a long time, so you need to first choose the place properly. Ground leveled and cleaned of debris. Then use the usual rope and pegs to indicate the areas and walls. Ideally, if the surface is pre-paved or lined paving slabs big size.

In the process of repair required:

• metal cutting shears;
• screwdriver;
• level alignment angles and walls;
• roulette;
• simple pencil chernografitny;
• screws for metal (not wood!);
• U-shaped profile.

When all the tools ready, you can proceed to the construction of buildings.

We collect and sheathes frame garage

Since the garage siding - a complex process, in this article we will give a general instruction. If you have collected at least once a garage or storage room of PVC panels or GCRThen you will be much easier to deal with the thin-walled sheets.

First, the drawing metal profile is cut using screws. It is best to assemble the wall and then pick them up. Such work will need at least 3-4 people. When the walls are fastened and secured, mounted roof. To do this, stand on a high ladder.

Important! You can give a great strength of the wall, using sandwich panels. But for this roofing material does not fit, it is better to use a conventional corrugated board.

Average prices LSTC profiles on the Russian market

The cost of some products according to the second part of 2018:

Prices for profiles need to be checked with the manufacturer.

Reviews of Internet users of buildings from LSTC

Popularity Building of cheap and durable material is only growing, and today they can be found everywhere. However, reviews of people have built homes and garages of LSTC largely contradict each other.

Someone completely satisfied with housing and believes it is the best solution, while others complain about the damp and cold walls.

However, it is important to note that negative feedback comes mostly from those who choose to save much and did not make the finished project, and not take the help of skilled construction workers. In Russia, the technology of construction of houses made of thin sheets only developed, therefore, in order to avoid marriage and error, it is best to seek professional help.

To summarize

The technology of construction of houses and garages of LSTC only developing, but it is already possible to note a positive trend and the growth of professionalism in the field. Every year the technology is changing and is being finalized. But today you can find a company, which employs real specialists and experts in their field. Plus order proposal in the company that are warranted. The material is much cheaper, which makes the construction even more profitable.

We hope that this information has been useful to you. Share your experience with LSTC and wishes the project at home.