Plasterboard 🌡 Infrared heating: from design to installation

click fraud protection

Heating in the house - an important condition for a comfortable stay. In modern cottages in the main stand gas heaters. In the absence of the gas line can be found solid fuel boilers or expensive to use electric batteries. The theme of today's discussion in HouseShief.ru - Plasterboard infrared heating. This is a novelty in the construction market, and while this housing alternative heating method few people know.

Plasterboard panels - one of the alternative ways to heat the room
Plasterboard panels - one of the alternative ways to heat the room

Read article

  • 1 On what basis the device works plasterboard
  • 2 As HPA-arranged heating panels
  • 3 How effective plasterboard heaters
  • 4 Advantages and disadvantages of energy-efficient heating gypsum "Revolts"
  • 5 Basics drywall heater installation
  • 6 Honest infrared panels finishes "Revolts"
  • 7 Plasterboard infrared heating: operating rules
  • 8 The price of heating gypsum panels "Revolts"
  • 9 And what do the reviews of the owners of plasterboard heating "Revolts"?

On what basis the device works plasterboard

The operation of gypsum boards is the principle influence infrared radiation the surrounding objects. This radiation - the brother of the sun's rays.

Infrared waves do not heat the air, and the things that are in his way
Infrared waves do not heat the air, and the things that are in his way

And already on the subjects, in fact, it is heated and the atmosphere. The result is a warm and safe batteries of which can not be burned. The air in the room is too dry, it is very important.

As HPA-arranged heating panels

Outwardly, the panels look like the easiest thin sheet drywall size 60 × 60 cm. But this simplicity is only external. Inside mounted gypsum sheet film from a special polymer consisting of carbon composite.

On the rear of the panel is protected by the insulating layer, and is equipped with a cord for connection to the mains
On the rear of the panel is protected by the insulating layer, and is equipped with a cord for connection to the mains

you can safely use these panels wall cladding and ceilingThey can be connected into a single system. Plates are heated from the inside and emits infrared radiation, while consuming 100 Vt⋅ch heating area of ​​1.5 m². It's hard to call this technology in the truest sense of the energy saving. A carbon polymer film within the CPC-battery does not melt, does not oxidize and does not burn. The room temperature can be adjusted by a simple device which can be mounted separately on the wall panels.

The control unit may turn on and off the panel in the desired time
The control unit may turn on and off the panel in the desired time

How effective plasterboard heaters

Experience in the use of HPA-panels shows that they are able to work effectively for 10 years continuously. So that the resource in this device just huge. With regard to the overall performance - it should be noted that such devices room warms up very quickly, but just as quickly and cools down after switching off. On average, for the full heating of a small room in a 15 m² need 1 kWh.

Layout "Revolts" panels
Layout "Revolts" panels

Advantages and disadvantages of energy-efficient heating gypsum "Revolts"

Plasterboard heating brand "Revolts" in reviews - one of the highest quality examples of such heating. On it is possible to consider the pros and cons of installing a heating system in residential premises. Pros:

  • very easy to install - these plates can be mounted in the same way as a conventional plasterboard liner, or simply mounted on the wall surface as the attachments;
  • there is no need to obtain permission or coordination of the installation of such equipment;
  • Thin sheets of plasterboard virtually no space. Light and discreet, they can be placed not only on the walls but also on the ceiling;
  • long lifetime guaranteed high-quality pictures inside and outside panels;
  • versatile use - these plates can be placed in any room, including the kitchen and bathroom;
  • absolute safety for humans.
The panels do not require regular maintenance
The panels do not require regular maintenance
Rapid heating of the room - a feature infrared heating
Rapid heating of the room - a feature infrared heating

Reviews of plasterboard heating panels "Revolts" mark and cons:

  • panel "Revolts", like any other power, require compliance in handling safety with appliances;
  • high operating costs - for the full heating of these devices consume a lot of electricity.
To minimize losses in the operation of these panels, experts recommend thoroughly warmed the room and use a protected high-quality wiring
To minimize losses in the operation of these panels, experts recommend thoroughly warmed the room and use a protected high-quality wiring

Basics drywall heater installation

To simplify installation, the producers applied to the drywall panel heaters special markup. It shows the attachment points. The rest of the process is the same as that of a conventional GIC sheets. Mounting may be open or hidden.

When the open connectivity options cords tucked into the cable channel, when hidden - hide behind crate
When the open connectivity options cords tucked into the cable channel, when hidden - hide behind crate

for more insulation on the reverse side of the panel is placed "Izover" or other similar insulating material.

Honest infrared panels finishes "Revolts"

Before you buy Plasterboard heating "Revolts" to decide how to write these batteries in the interior. Manufacturer insists that HPA-heating panel can be coated with any finishing materials. Do not rush to do so. Practice shows that the panels coated with plaster or ceramic tilesMore heated walls, than the room. This leads to large energy loss and the progressive destruction of the material themselves heaters.

And another important point for finishing: these panels can not be cut like regular drywall, in this case, they will not work.

When planning a deployment of infrared heaters, immediately calculate the number and geometry of the accommodation
When planning a deployment of infrared heaters, immediately calculate the number and geometry of the accommodation

Plasterboard infrared heating: operating rules

by electric heating experts recommend placing drywall panel heaters in the ceiling or wall in the midline. If you plan to install a heater in couch, The distance between the panels and sofa should be at least 80 cm.

In areas with high humidity and intense operating conditions such panels are better placed in the ceiling area. If unconventionally high ceilings, consider installing them in the comfort zone - for table or sofa.

Infra panels do not require maintenance or any special cleaning. If necessary, brush them obmesti
Infra panels do not require maintenance or any special cleaning. If necessary, brush them obmesti

The price of heating gypsum panels "Revolts"

One panel of standard size 60 × 60 is an average of 1300 rubles (in prices of autumn 2018). Revolts plasterboard heating panels can be purchased from dealers of the company or building hypermarkets.

And what do the reviews of the owners of plasterboard heating "Revolts"?

In general impressions of this product are positive: many who tried plasterboard heaters, celebrate their efficient operation. Here are some reviews of the drywall panels heating Revolts:

Plasterboard 🔥 Infrared heating as an alternative to conventional batteries
More information on http://www.fazendeiro.ru/forum/viewtopic.php? t = 6115
Plasterboard 🔥 Infrared heating as an alternative to conventional batteries
More information on http://eso-76.ru/otzyvy-o-panelyah-revolts.html

But the experience of the buyer in the video:

What is the result? Price plasterboard infrared heating, considering the cost of electricity and restrictions on its use, making it not the most profitable option. Such heating can only be used as an additional safety option in case of hard frost.

We must remember that to be too close to a source of infrared radiation is undesirable, especially for people with poor health
We must remember that to be too close to a source of infrared radiation is undesirable, especially for people with poor health

The rest of the plasterboard infrared heaters - a good choice: they are durable, efficient and convenient. What do you think about this kind of heaters? Write about it in the comments!