Washing machine Ariston Margarita 2000 - malfunctions

"Ariston" washing machines are well known to modern consumers and enjoy incredible demand. Produces these devices the Italian company Merloni Elettrodomestici S.P.A., which is the leader in the domestic market. The model range of this brand is headed by a multifunctional and high-quality washing machine Ariston Margarita 2000. Faults it can be called typical for the units of this line, so you need to learn more about the most common ones and consider options for their solution. What will we do in this article.

to the contents ↑

Features of operation Ariston Margarita 2000

The models of this series have a wide range of functions and are distinguished by sufficiently high quality parameters of washing, rinsing and spinning. They consume a minimum of electricity and water. They belong to the A class of washing, because even if the water is heated to 40 degrees, they consume only 0.15 kilowatts of electricity per kilogram of dirty laundry.

This washing machine is equipped with quite an interesting program called "Golden Cashmere", which allows you to wash only delicate fabrics and avoid the formation of pellets. But the function of daily washing assumes a cycle time of only 30 minutes, while you can load into the drum things of any colors.

Fast washing in just 90 minutes allows you to wash medium-sized items. If you wish, you can defer the start of the Ariston Margarita 2000 device at the right time. Malfunctions arise in her work rarely, but all of them require attention and in most cases the intervention of specialists.

to content ↑

Setting the washing mode

Initially, the machine is in the standard standby mode, indicated by the "A" indicator, and to start the desired program, you need to use a special command handle.

The indicator in mode "B" indicates that the device is ready to receive a new program, and once it is selected, it will be indicated by a "C" indicator. And immediately after that, the washing begins. Its execution can be stopped, and for this purpose the program handle must be turned to the reset position.

to the contents ↑

How to set the delayed start timer?

To stop the countdown, you need to set the knob to the "SC" position and press the "Reset" reset, it will stop for five seconds. But if you need more time, then select the desired amount on the display. And all the time the machine will be in the standby mode.

to the contents ↑

Ariston

model error testing If a fault was detected in the operation of the Ariston Margarita 2000 washing machine, the on / off indicator immediately flashes, and the command handle will rotate randomly. The nature of the flashing of this indicator indicates a fault code.

The most common fault codes:

1. A short circuit has occurred in the motor circuits.
2. The connection with the total stations has broken or the motor has jammed.
3. An open or short in the temperature sensor has occurred.
4. The pressure switch is jammed in the "Empty" position.
5. The relay is plugged in the "Device is full" position or there was a blockage in the drain pump.
6. An error occurred in the control function.
7. The heating relay is jammed.
8. The heating relay has stopped working.
9. The model is incompatible with EEPROM.
10. Relay in charge of pressure, simultaneously send signals that the device is "Filled" and "Empty".
11. The drain pump is out of order.

Important! To more accurately identify the problem, specialists use a special tool, namely a hardware key. It can be connected to a computer and initiate a washing operation, during which the machine will perform self-diagnostics. It is inserted into a special hole located on the back of the device. If you do everything right, then the indicator on the block will turn red, that is, you can begin to conduct a self-test.

to the contents ↑

Step-by-step execution of testing of machine failures Ariston

It is recommended to repair the washing machine "Ariston Margarita 2000" with your own hands only if there is a special service test. It allows you to easily detect any defect in the work of the device and make repairs faster and easier. Next, we will learn how to run this test and test the machine's performance.

Working with the service test

In order for the service test to start working, you will need the above-mentioned key for SAT diagnostics. This tool has the following code - 95669. It allows you to run the program of automatic testing of the model "Margarita 2000".Then we connect the device to the connector and wait until the corresponding indicator lights up. At first the key will exchange information with the electronic controller for a while.

The testing program is started as follows:

1. We check the connection of the machine to the water supply and sewerage.
2. Inspect the tank for the presence of residual water in it, if it is, then it must be removed immediately.
3. Close the door of the hatch.
4. Set the selector knob to the home position.
5. Press the "AUTO TEST" button on the key and hold it.
6. Once automatic testing starts, you will hear a beep immediately.

Important! During the test, the selector knob will automatically rotate, and at the same time, codes of the appropriate character will be displayed on the panel. If the test detects an error, the indicator will stop permanently and the lamp will flash flashing, that is, indicate the DTC.

The number of flashes indicates the error code. Note that when testing the water inside the device will be heated to 30 degrees, so you need to set the water heating limit, turn off the spin function and set any drying time.

Step-by-step execution of service testing

We can conditionally divide the process of diagnostics of the washing machine "Ariston Margarita 2000" into several stages. Faults and possible faults are eliminated in this order:

1. The flush valve for washing in the main mode is selected and started for 10 seconds.
2. Then the prewash is started for the same time in the same mode.
3. The hot water valve opens for 10 seconds.
4. The flap valves for main and pre-wash are synchronized. Water will flow into the tank until the sensor signals that it is full.
5. The drum rotates clockwise first, and then in the opposite direction.
6. The heating element turns on and the water warms up to 30 degrees.
7. The handle moves in the normal direction of rotation, and then stops in the 9th position.
8. The drain pump starts working. Moreover, it will function until the sensor notifies that the tank is emptied.
9. If the device is equipped with a drying mode, then its fan starts to work at this stage, and then the heater switches on and the air inside the tank starts to warm up.
10. The selector lever moves to the reset position.
11. The program is shutting down.

Important! If the malfunction of the washing machine "Ariston Margarita 2000" was eliminated before the inspection, the service analysis simply will not start. To restart the machine in this case, you need to turn it on for 10 seconds, disconnect the service key and start it again.

to the contents ↑

Assembly and disassembly rules Ariston Margarita 2000

If you want to solve the problem yourself, you need to understand how the Ariston Margarita 2000 washing machine is properly disassembled and assembled. Malfunctions of this model are largely eliminated by partial or complete disassembly.

The top cover is removed quite easily, you just need to unplug the control panel and unscrew several screws from the rear wall. To remove the cover, you need to unscrew the two mounting bolts and simply slide the cover to the side. The screwdriver will help to accurately remove the spring ring that attaches the sealing rubber directly to the body and the sealing rubber on the door. Screws are turned out using a Phillips screwdriver. Once the new part is replaced, the rubber band returns to its place.

This process looks like this:

1. The top cover is removed.
2. The cover and handle are removed.
3. The screw is turned out of the handle and the mechanism is removed.
4. The drawer for detergent dispenser is opened and is extracted by pressing.
5. The two screws on the control panel and the loading door are loosened.
6. Potentiometers are removed.
7. Button switches are removed.
8. The on / off and lock indicator lights are removed.
9. The screws on the control panel are reversed.
10. The counterweight is removed using a socket wrench.
11. The tank is removed, all screws that hold the counterweight are turned out.
12. The back cover and drive belt are removed.
13. The bolt out of the pulley is loosened, which prevents it from turning.
14. The pulley is removed using two screwdrivers.
15. Then the machine is tilted forward and something propping it, but you need to make sure that the electrical components of the lock and the control panel do not drop out.
16. Disconnect the motor by pulling the terminal block and disconnecting the ground wire.
17. The motor is lowered and pulled out through the already missing rear panel.

So, we have examined the basic rules and sequence of analysis of this model of the washing machine. If you follow them, then the process of replacing the broken part will not cause any difficulties.

to the contents ↑

Removal of the most common malfunctions of the washing machine Ariston Margarita 2000

Repair of the washing machine "Ariston Margarita 2000" with your own hands can be carried out if you follow the instructions below. The most common faults of this device are eliminated as follows:

1. If the machine has stopped filling up water, but at the top of the housing on the left side, the sound of running water is clearly heard, then you need to check if the tap supplying water is open and the supply hose is not jammed inwashing machine. You can also check if the reticule on the filter is clogged.
2. The machine has become chaotically pouring and draining the water, but the specific hum of the pump is not audible, then you need to check at what height the drain hose is installed. This distance should not be less than 60 centimeters. Perhaps the cause of the malfunction was the detachment of the drain hose due to vibration. To solve it, you need to return the hose to its place.
3. The device does not drain water. You can try to merge it in manual mode using a drain filter, only before that you need to put a tray under the machine. It is also recommended to check the cleanliness of the filter and drain hose, if necessary - to clean them.
4. The machine has stopped executing program commands, namely the device responsible for selecting functions is constantly rotating in a circle. You need to take something metallic with an insulated handle and set the switch handle to a black point, then pull the plug out of the socket, close the outputs on the plug of the cord with this object. In this way, the residual voltage is removed from the device module and the program is reset.

This information will be enough to make an independent diagnosis of the breakdown and its elimination at the first stage. If among the listed breakdowns was not the one with which you collided, then you will have to resort to the help of a specialist.