How to polish glasses glasses at home?

Poor vision makes glasses an integral part of your life? There is nothing bad in them. As a rule, corrective glasses stop noticing after a while of constant use. But what will be able to pay attention to them again? Scratches and rubbing. Let's get rid of the sore problem together. Now we will tell you how to polish glasses glasses at home. This article will also be useful to those who wear sunglasses and those who use special-purpose accessories when working with a computer.

to the contents ↑

How to polish the glass on the glasses?

If you are a neat person and do not scatter your glasses everywhere, then you will not have to struggle with scratches on the lenses. But there are people who pay little attention to storing this accessory, then the need to solve such problems sometimes arises.

Important! Minor scratches are conspicuous and may lead to visual impairment. Lenses that have a coating, will have to be replaced with new ones, but ordinary glasses can be polished without problems and return them "factory" transparency.

Let's try to open the veil of secrecy, how to polish glasses glasses at home?

to the contents ↑

Cleaning the lenses with your own hands - instructions for the work

For work you need to get a paste for polishing machines, toothpaste and GOI.It is better to prepare beforehand cotton wool, a cloth and felt. It would be nice to have a grinder.

Important! To combat small scratches on the lens, there is no need for a grinding machine.

Polishing glass for small defects:

1. Take a piece of soft felt or thick cloth and evenly distribute the GOI paste.

Important! If the design of glasses provides fastening of lenses by cogs, it is better to take them out of the frame.

1. Place the lens with the defective side on the felt and polish it in a circular motion until the marks on the glass are no longer scratched.
2. After that, wash the glass in soapy warm water to get rid of the residue of the paste and return it to the frame.

We grind lenses for large scratches

It will be quite difficult to get rid of a large scratch without a grinder. Therefore, we act so that we polish the glasses glasses at home:

1. We install a felt wheel on the machine, with a paste applied to polish the car.
2. We start the device at medium power, press the glass to a circle of felt and polish it.
3. Watch for a scratch, if it almost disappeared, you should replace the circle and polish the lens further to its full transparency.
4. When you achieve the desired result, the surface must be treated with vegetable oil. To do this, put a few drops of oil on the cloth and rub the glass with circular circular motions, preferably two sides.
5. After the procedure, always rinse the lens with warm water and soap.

Important! You need to polish the entire surface, not the defect itself.

We dispense with special tools:

• You can cope with the problem and without the use of special materials, it is enough to have a simple toothpaste on hand. Apply it to felt or a cloth and polish it to transparency. Unfortunately, it will take much longer to act, applying paste several times.
• Instead of toothpaste, chalk can come up, it is applied in the same manner to the cloth and polished until scratches disappear. Finish the procedure, again, followed by warm soapy water.

Important! Do not use whitening pastes, because they contain solid particles that can cause even greater harm to the glass.

to the table of contents ↑

Read more about glass cleaner

How to polish glass on glasses? Let's look at the most popular tools, improvised and not only:

1. GOI paste No.80.This tool is applied to a non-rigid fabric and gently grinds the damaged surface manually or on a special machine.
2. If there is no machine, then you can use an electric shaver with a linear drive. With the shaver, you must remove the mesh before the process. From the soft material, cut out a circle of the square that would fit the razor's edge, fix it along the edges with a thread. The device can be used. After work, the glasses are lubricated with oil and thoroughly wiped with cotton. Baking soda and water. Baking soda is bred in water to the state of paste. Such compositions can clean the lens by analogy with toothpaste.
3. Polishing for CDs. This tool can be purchased at a computer store. Clean the lens with this tool you need to follow the example of cleaning CDs, and help you with this attached instruction.
4. Polishing for wood. You can use the funds from the hardware store - a polish for a tree is a good choice. To get rid of scratches, it is enough just to sprinkle this eyepiece tool. After that, you can take a little Vaseline and rub the problem surface to them. Due to its properties, scratches will become less noticeable.
5. Polishing for copper and silver. Apply the product, thoroughly wipe the glasses. After the process, remove residual liquid with a clean cloth. The procedure should be repeated until all scratches disappear.
6. Spray for computer. This tool will be quite effective for our purpose. Elimination of minor damage is the main task of this tool, so it is ideal for glasses glasses. Remove it with a clean cloth.

to the contents ↑

Disadvantages of self-cleaning

Polishing lenses at home has its drawbacks. You can always overdo and earn geometric aberrations. This is due to the fact that it is difficult to keep geometry at home. From new defects, vision will suffer.

Important! Methods, which were discussed, will cope with only "hair" scratches, in other cases - in the place of cleansing may appear depressions that cause optical distortion. Do not forget to determine the material from which the glasses are made, otherwise - there is a possibility that such methods of polishing are not suitable for them. Follow the manufacturer's instructions.

Doubt in home polish? Use the services of a master.

Important! When trying to get rid of the scratches on the glasses, remember that you are dealing with a whimsical accessory. Excessive force can damage the frame or lenses.

This article will help you polish glasses glasses at home and preserve the integrity of the glass surface. The main thing is to remember the above mentioned things and be careful.