How to install a washing machine so that it does not jump?

click fraud protection
Contents:
  • Which machines are jumping?
  • If the machine is a new
  • If the machine is not a new
  • Eliminate the causes of

Modern washing machines make life easier for any mistress. But sometimes with technology there are problems. For example, a washing machine jumps. It is important not to postpone the problem "for later" and find out the reasons immediately. Better yet, right after the purchase of equipment, learn all the rules, how to install a washing machine, so that it does not jump, and do everything competently. You will learn all this from this article.

to the contents ↑

Which machines are jumping?

If in time to identify the cause of excessive vibration of the washing machine and take action, you can avoid its expensive repair. With the spin mode, any automatic machine works at very high speeds, and its natural vibration is normal.

Look at the model even at the stage of purchase - modern models are equipped with mechanisms that reduce vibration, but not to the end:

  1. There are models of automatic machines that shake more than others when washing. Usually these are narrow and light models. Their area of ​​support and low weight do not give the opportunity to stay in one place.
  2. Also these machines have a small drum that does not allow correct alignment during washing and the machine starts to skip.
  3. It should be noted that according to statistics, automatic machines with a metal drum are subject to vibrations more often than other models.

Important! Today you can meet the types of machines in which the drum is separated from the case, which significantly reduces the load on the body and the machine jumps much less.

to the contents ↑

If the machine is a new

If the washing machine jumps when pressed but has been connected more recently, its jumping can give signals that can be easily eliminated.

Important! You must understand that everything is interconnected in technology. Even if you diagnosed not the most terrible breakdown - it is better to eliminate it as quickly as possible, otherwise - you can aggravate the condition of your washing machine. And if there are serious difficulties, then to help you can always call the master.

First reason

Check the drum fixing bolts for transport, and if there are any, remove. Often when installing a new machine these bolts are forgotten to be removed, which can easily lead to its breakage.

There are four screws directly on the back cover of the machine, and are removed by simple twisting.

Important! Do not throw them away. If you are going to transport a car, then they will come in handy.

The second reason for

Another reason for the possible strong vibration of the washing machine during spinning and working may be incorrect installation of the machine. Installation is best done using the level: if the machine staggers even when it is not working, or the floor is not solid enough, it will jump not only when spinning, but also when washing.

Do not forget about the slippery floor - right on it you should not install a machine.

Important! The best option would be to use an anti-slip mat or special anti-vibration mounts for stylalki.

The third reason

The simplest version, why the machine jumps is the wrong loading of laundry into the tank. To prevent such situations, it should be remembered that the laundry in the drum should be distributed as evenly as possible. If the centering is lost and the car jumps - the best option is to turn off the car, and redistribution of laundry in the tank.

Important! Some modern models give an error in the wrong distribution of laundry, but do not rely on them - it is better to check whether everything is in order before starting the washing.

Do not forget to take into account the mode when washing, and remember about the maximum and minimum load, because if you do not regularly meet the requirements of the manufacturer, then the machine jumps are inevitable.

The fourth reason is

It also happens that there are foreign objects in the car: coins, buttons, pins and so on. They do not allow the automatic machine to work in the usual mode, and the machine starts to jump. To prevent small items from entering, be sure to check all pockets before washing, and if you are not sure that the button on things will withstand washing - use special protective clothing covers.

The fifth reason

It also happens that the reason is in marriage. In this case, if the warranty allows, it is better not to hesitate and contact the manufacturer for replacement, and not to be puzzled by the question "the washing machine jumps while spinning - what should I do?".

Important! Do not try to repair the new machine yourself, because the intervention in its system can cost you a warranty service.

to the contents ↑

If the machine is not new

In older models of washing machines, the reasons for its jumps may be hidden both in previous versions and in another.

Depreciation

In order for the machine not to break the floor by vibration of the drum, special shock absorbers, springs are installed in it. Over time, these elements may lose their properties, and the drum may skew, and the parts of the apparatus will begin to rub against each other.

Therefore, it is necessary to check if the springs are worn out and replace them if necessary. This is done simply: the mechanisms are located in the rear of the machine, under the protective wall, which must be unscrewed.

Bearings

The second problem is a worn axial bearing. It is impossible to make a mistake in diagnosing this failure: if you have it, you will hear a rattle, and when the stylalk stops, the tank will turn freely in the side.

Important! This is a serious breakdown, in which you can not use the machine without repair.

Counterbalances

Another important detail that allows to quench fluctuations of the washing machine is a weighting agent. Usually they are made of cast iron or concrete. These counterweights are located on the drum, from opposite ends and attached to it with the help of bolts.

If the washing machine is jumping, you should check that the weighting material fasteners are loose.

Important! Counterweights from concrete can eventually collapse - this is normal, it's enough to just replace them, and the car will again work as a new one.

Engine

The most unpleasant fault, why a washing machine jumps when squeezing out - the breakdown of its engine.

And the simplest version of this breakdown, which can be eliminated quickly and without additional attachments - the electric motor is poorly fixed. If the holders are all right, you may need to change or repair the spare part.

to the contents ↑

Eliminate the causes of

If the cause is determined, you can try to fix it safely.

Solution 1

If the centering of the laundry is incorrect, it is sufficient to take the following steps:

  • disable the styrical;
  • wait for the unlocking of the door;
  • open the tank;
  • get the laundry, straighten it and lay it back;
  • if its a lot - part needs to be removed;
  • the machine is then connected in the spin mode.

Solution 2

If the machine is unevenly installed, the question arises: how to fix the washing machine so that it does not jump?- For this you can:

  • level the floor surface;
  • to make adjustment of legs;
  • put special stands against vibration.

Solution 3

Find the foreign object trapped inside, you can use a flashlight: just light them in the tank and twist them in different directions. If an object is found, you need to gently pick it up with something sharp.

Important! In case of more serious breakdowns, or if you do not understand how to install a washing machine so that it does not jump, you should contact the service center.

Today is very common problem when a washing machine jumps when spinning. What if it happened to you? The main thing - do not panic, and correctly diagnose the problem, and afterwards start fixing. But if you do not give the problem due importance, and postpone its decision "for later", then you can bring the technology to a state where you have to buy a new one.