Good sleep is a guarantee of health and good mood. To do this, it is important to properly organize the bed. The selected mattress depends the health of the spine and ease of body position. Therefore it is necessary to understand the nuances of the product selection and see what the box spring.
The basis of most modern mattress is a spring unit
Content
- 1 Mattress with independent spring block
- 2 Independent spring block - what it is and how to choose?
- 3 Bonnell spring unit - what is it?
- 4 Mattress spring units: types
- 5 The difference between independent and dependent spring block. For which we overpay?
- 6 Packaging independent springs, type of material and method of bonding
- 7 Tips for choosing a mattress
- 8 Video: mattress springs: Bonnel or independent
Mattress with independent spring block
Mattress spring unit with independent vary depending on the number of springs per square meter
Mattress equipped with independent spring blocks, a construct with the lack of interaction between a spring. Each of them is a special case. It allows you to create orthopedic effect, as every part of the body to the extent necessary.
Levels anatomic effect of the example spring units
Independent spring block - what it is and how to choose?
Independent spring block - springs in the mattress placed in separate bags and work independently
For a suitable choice should understand what constitutes design. The independent spring unit is a base with a plurality of springs acting autonomously. The surface of the product becomes elastic, so that would be the position of the body during sleep. When the independent spring block mattress repeats bends lying man. It should be noted the main advantages of such a structure.
- Anatomic. Mattress fully adjusts to the contours of the body. Comfort products increased by using a larger number of springs.
Spring mattresses better adjust to the sleeping position, if the spring block contains at least 500 springs per square meter
- Safety and long service life. There is no formation of dents. High surface strength, which avoids puncture tissue during a broken spring. This allows you to avoid injury.
To increase the service life it is important to turn the mattress once a quarter
Since each spring is placed in a separate case, in the case of failure it will not be able to break and injure the sleeping mattress
- Extract high loads. Independent spring block does not deform when a large weight.
Independent spring units can easily cope with the weight of more than 100 kg person and thus not deform or subside
- Minimum transmission movements. If one tosses in his sleep, the second sleep does not feel it. The effect is due to the springs alone, alone.
Such mattresses effect of fluctuations is minimal or absent
- Creaks. Each spring is located in its own cocoon of fabric. Because there are no unpleasant noise when using the product.
The springs are isolated from each other, so there is no friction and no squeak
To design was high-quality, it is necessary to know what to consider when choosing an independent spring block.
At various difference in weight of the spouses can choose the version with two hardness zones
The main criteria are reflected in the table.
Characteristics | Description |
metal quality | Springs should provide resilient compression and quickly respond to change and workload. At each site the bed is a different pressure from the body. Many spring units made from hardened steel, have a high content of carbon or manganese. Spring with the greatest responsibility are made of special wire. After the production of the product being tested. It is important to pay attention to the material, which is the basis unit. |
The density and location | Reducing the diameter of the product allows them to more tightly fit into the design. Then support will be more reliable, and orthopedic effect is better. Particularly relevant this option for large people. |
Bonnell spring unit - what is it?
The dependent spring blocks all springs are connected bikonusnuyu form and braided continuous
Enhanced version of the classic Bonnell spring unit in which the whole area of the mattress blocks of reinforced high-density polyurethane foam
This spring assembly is in demand. He is a "dependent" species. Because the internal construction elements are interconnected. As a result, each spring and is independent of the other. It uses a special method for their bonds.
Bonnell spring unit consists of a 5-turn spring made from steel wire
Radius constantly decreases and increases. To the center of the product box spring, and its details are narrowed, and the edges begin to expand. With this system, the load is distributed evenly and keeps optimal body position.
Mattresses on the basis of the spring Bonnell block a long service life, well-ventilated and dry quickly when wet
The springs are made of high quality steel. For connecting their use special frame with knots or wire. Unwinding avoid special locks on the design. Braiding may be four or five turns. In the first case, the mattress a higher and more expensive.
All springs in the mattress top and bottom are connected with each other steel wire and bounded metal frame
Mattress spring units: types
Orthopedic spring mattresses of different species
The spring units can operate in compression or tension. The first type is often used in the manufacture of standard mattresses. Among the basic types of blocks are allocated:
- dependent;
- acting alone or independently.
It has been noted that in the first case, each inner piece independent of the other and connected to them. In another form each element operates independently and does not interact with the others.
The difference in the use of the spring unit with independent and dependent springs
Experts believe such an option is more suitable for healthy sleep, but it is more expensive. Mattress spring unit with dependent cheaper. You can pick up a quality option for guests.
The difference between independent and dependent spring block. For which we overpay?
The spring unit can be an independent system, and dependent. It should understand the basic differences between the species. This will make the right choice when buying a mattress. To figure out the differences, it is necessary to specify the main characteristics:
- Block with dependent springs. They are woven together to form a single mechanism. Components of the mattress parts are made of steel wire. The models are divided by the density of installation of springs and their diameter. The smaller the latter figure, and higher the density, the better the body will be kept in a dream. The advantages of the system are available, thanks to the low cost and the ability to withstand heavy loads. Over time, the spring assembly deformation can occur, the product will begin to sink. Next to the sleeping person feels all the movements of the second during sleep.
- Independent unit. The springs act independently regardless of each other. Features springs directly affect the rigidity of the product and its density. This allows him to become an orthopedic. Due to the independence of each spring is compressed, without affecting the other. The load is distributed evenly, the mattress body contours. In case of failure of one of the springs that will not affect the entire product. One of the key weaknesses of the independent spring block type is the high cost.
"TFA» (TFK) - classic spring-block with the number of springs 250 pr / sq.m.
"Multipaket» (Multipocket) - 500 pr / sq windings typically 8-10 springs when height of about 13-14 cm, more "Anatomichnyj" compared with "TFA".
"Mikropaket» (Micropocket) - about 1000 Ave / m, with the number of turns is usually 12-14 at the height of the spring about 13-14 cm, significantly more expensive than the two previous ones.
Independent system is not conducive to cure a bad back. But it will be an excellent prevention for maintaining health. If a mattress is purchased for destinations and not sleep, then do not pay and just select the dependent system. In other cases it is better to select a block with independent springs.
Packaging independent springs, type of material and method of bonding
The most vulnerable part of the product is the outer skin material. She regularly exposed springs. Because weak tissue can be easily damaged. On the material should pay particular attention. From this mattress life depends. Importance and packing of the spring assembly with an independent system. Using spunbond and Fibertech. The latter is more durable.
Durable outer skin of an independent spring block tissue significantly increases unit life
In the manufacture of non-woven products of the welded using ultrasound. The proximity of the gluing points to the middle of the pocket allows the springs to operate more independently, orthopedic reinforcing properties. Also for compound uses a special glue, which leads to a specific odor. Over time, it disappears.
Tips for choosing a mattress
The mattress should be neither too soft nor too hard, and exactly as required weight, size, and personal preferences of the client
For a proper choice should be based on the following characteristics.
- The size. If you already have a bed, you should measure it and find a suitable version of the mattress. In other cases, first find out whether the bed size you need.
Before buying a mattress you need to make basic measurements beds
- The weight. It is necessary to correctly relate the stiffness of the model and the severity of sleep. The more sleep weighs, the more hard mattress must be purchased.
When choosing a mattress you need to take into account the stiffness of the individual characteristics of
- block type. Already noted the main features of the dependent and independent system.
- Manufacturer. Should apply only to trusted companies that have proven themselves on the positive side.
The choice of the mattress and its components depends on sleep comfort. Because you should seriously consider the choice. This will keep the health of the back and provide a good night's sleep.