Part of the arrangement is a comfortable bed to find a suitable mattress. The most important selection criterion - its size. That is, the length, width and thickness. Matched wrong quality item may be a disappointment.
Standard sizes of adult and children's beds
mattress size must meet the following criteria.
- Geometric parameters of the bed
It is desirable to match the maximum size of the mattress and the bed or sofa. Only then will be able to form for a relaxing holiday flat stable surface.
Measurement of the length of the bed
Metering bed width
- human growth, for which it is intended
Length should be equal to the height of the user, plus 15 centimeters. For children who are still growing, the number should be increased to 18-20 cm.
Recommended criteria for choosing the mattress size
It is these two things are crucial in the selection process.
Content
-
1 Standard Mattress Sizes
- 1.1 Graduation Mattress width: single, double, sesquioxides
- 1.2 Gradation along the length of the mattress: children, teenagers, adults
- 2 What to do if you need a non-standard size mattress?
- 3 Another important parameter: the height of the mattress
- 4 When should I prefer spring mattress?
- 5 When it is recommended to give preference to non-sprung models?
- 6 The difference from conventional orthopedic products
- 7 Size mattress for newborns
- 8 Video: How to choose a mattress for a bed - a detailed and clear video review
Standard Mattress Sizes
Specifying the length and width of the bed; human growth, which will be there to sleep, you can try to pick up the mattress of standard size. The most common model versions have a width of 80, 90, 120, 140, 160, 180, and 200 centimeters in length - 190, 195 or 200.
The mattress should fit into the frame of the bed in all three dimensions
These sizes are present in almost any store a profile, find them easier.
Parameters of different mattresses for beds and sofas
Sometimes there mattresses for beds round, which characterizes the magnitude of the diameter. Typical products of this type are small (with a diameter of 200 or 210 cm), medium (220), large (230 or 240).
Bed non-standard shapes require special mattresses
Graduation Mattress width: single, double, sesquioxides
The minimum width for each type of mattresses
Both standard and non-standard samples classified width into 3 groups.
- single mattresses
Characterized in size from 60 to 90 cm.
Single solid wood boxes with size 190 * 80 cm
- Full size mattress
Offer a comfortable bed for one. Have a width in the range from 95 to 135 cm.
Concise half bed with a size of bed 120 * 200 cm
- double mattresses
It is a fixture in the conjugal bed. Their size ranges from 140 to 220 cm.
A double bed with a soft quilted upholstery in black 160x200 cm
Standard sizes of mattresses in length, width, height
Gradation along the length of the mattress: children, teenagers, adults
It is generally accepted categorization of products of this type and length.
- child
This includes models with parameters from 120 to 160 cm.
Kids sizes of mattresses from different manufacturers
- teenage
This subgroup includes mattresses from 170 to 185 cm.
Dimensions teenage bed with overshoes
- Adults
This category is represented by the higher number of proposals size from 190 to 220 centimeters.
Size beds to accommodate 1 or 2 adults
Knowing which category belongs a necessary thing, it is easier to find.
Summary table of the size of different types of mattresses
| Single | Full size | double | |
| child | from 60x120 to 90h160 | – | – |
| teen | by 60h170 to 90h185 | by 95h170 to 135h185 | – |
| adults | by 60h190 to 90h220 | by 95h190 to 135h220 | from 140x190 to 220x220 |
As can be seen from the table, mattress size for adults vary widely in all. The likelihood it will be possible to find a suitable sample from the number proposed at the mall, is quite high. With children and teen segments, the situation is more complicated.
What to do if you need a non-standard size mattress?
It happens that the typical options offered in retail chains are not suitable. In this situation, you can do a thing to order. Its cost will about 20 percent higher than that of a similar standard sample from the store.
Before ordering a custom mattress should be carefully measure the sleeper bed
Important! Values of products should be multiples of 5 cm. That is permissible to order, for example, the thing 175h175 cm. But 178h213 - no longer possible. This limitation is imposed features of the equipment used in factories.
Along this route are wishing to have a bed of non-standard forms on individual design project. For example, hexagonal, triangular or rhomboid. In such situations, we have to make appropriate mattresses under the individual order.
Custom mattresses must be produced "by hand", rather than the assembly line, it affects their manufacturing cost and timing
Another important parameter: the height of the mattress
The height depends on the amount and composition of the layers of which it is made. The market offers two fundamentally different versions.
- Spring mattresses.
Spring mattresses with dependent and independent spring block
They represent a layer thickness of springs 120 mm from the top and bottom plates which are arranged from the latex material of 30 mm. That is the height of the mattress starts at 18 cm and can reach 50. However, the most common case - 20-22 cm.
- Springless mattresses.
Springless mattresses are resilient block consisting of natural or synthetic material
They are based on alternating layers of different fillers. Usually used for this purpose latex, coconut coir, polyurethane foam. The thickness of each layer is 30 mm. The minimum number of interleaved plates - 5. Thus, the height of the springless mattress starts from 15 centimeters. And can reach 24. The base for this is considered to be 16 cm.
To determine the desired thickness of the mattress, you need to understand which type is preferable for you.
In determining the degree of rigidity and the filling of the mattress must proceed from the weight and height
Important! In any case, the mattress has to be above the lateral side bed at least a few centimeters! It is considered - the higher the product, so it is more convenient.
When should I prefer spring mattress?
Types of springs in orthopedic mattresses
Spring models differ in hardness, referring to the springs inside. There are hard, medium and soft varieties, with common or independent springs, providing orthopedic effect. In other words, there are spring mattresses virtually any specificity.
When it is recommended to give preference to non-sprung models?
The main types of fillers used in the manufacture of mattresses springless
However, there are a number of situations, when to give up the spring.
- For children and adolescents
Growing spine is more useful to have a rest on a springless mattress of the bed.
- When a number of diseases of the locomotor system
If the doctor advises to abandon springs to it is certainly worth considering.
The difference from conventional orthopedic products
Unlike conventional and orthopedic mattress
As spring and springless orthopedic varieties support body lying, exactly repeating its contours. In combination with a relatively high rigidity, it offloads the spine, allowing him to fully relax during your stay in bed.
Mattress Sizes of this type usually do not differ from the dimensions including non-counterparts. Apart from height, which is more often more than just at specialized supporting body models.
Size mattress for newborns
Sizes children's mattresses
As in any other case, this product sizes are determined by the dimensions of the bed. One must match.
A specific feature of the Baby models is that preferable for them to have considerable rigidity and contain no springs. That is, it is better to give preference to Springless options with a small thickness.
The mattress in a crib for a newborn is recommended with coconut filling, sometimes add thin layers to create a bilateral models
Arrangement bed is very important. And the choice of the mattress and its size is not less important than the search for a suitable bed.
