Sunk in the summer of the same type massive feather pillows with fillings that our grandmothers were shaken thoroughly and carefully disposal on beds. Today, the fashion went cushion smaller, and as a filler can serve various artificial and natural fibers. And although the procedure care for them remained the same, the pillowcases for them acquired new, advanced elements, one of which - the lightning.
Beautiful cushions are considered to be a full part of the decor in the interior.
Content
- 1 How neatly sew a zipper - a master class on pillowcases
- 2 How to sew a zipper in the cushion cover
- 3 findings
- 4 VIDEO: How to sew a zipper into a pillowcase.
- 5 VIDEO: How to easily sew a zipper into a pillowcase.
How neatly sew a zipper - a master class on pillowcases
Counters modern shops littered with an assortment of bed linen. When choosing the right buyers simply scatter eyes. But to sew a pillowcase for the pillow zip you can own, at home. How to do it - see the article. Thus, a master class on sewing pillowcases with concealed clasp.
To begin, prepare all the necessary materials:
- The cloth.
- Lightning length smaller side pillowcases.
- Thread in the fabric color.
- Scissors.
- Pins.
- Needles.
- Sewing machine.
Designers are advised to select the color scheme of pillowcases according to the interior color and never - under the sofa obvivku.
Important! If sew pillowcases new tissue is used, the front cover it is necessary to wash in water at room temperature. The fabric after washing will sit, that will prevent the possible unpleasant situation when finished pillowcase sets after the first wash.
Getting Started.
- To spread out the cloth on the desktop.
1 cut from the fabric rectangle size 9 "x 16", and one rectangle measuring 12 "x 16".
- Measure the length and height of the pillow.
- Dimensions move on the fabric and mark with chalk.
Take 9h16 rectangle (upper part), and mark a line on the long side.
- Cut two pieces of fabric - for the front and rear of the cushion, leaving SEAM 2 cm.
Lay the fabric on the ironing board, add on a line drawn in the previous step, and proutyuzhte.
- Zipper to attach the fabric along the edge of the chalk mark and stab pins.
Mark the point where the lightning begins and ends.
So it will look like a seam.
- To stitch the bottom edge, and the distance between the pins flash broad or zigzag stitch.
So the fabric will look after iron the edges.
Take care that the needle is flat.
- Smooth iron fresh seam and impose on him the zipper face down. Secure with pins.
Pay attention to the label, to equalize the top and bottom.
- Flash of lightning in the usual stitch edge as close as possible to the cloves.
Crosslinking beautiful and flat stitching.
Make sure that the zipper is easy to unfasten.
- Remove the temporary suture, which were sewn fabric on the 6 stage.
Secure the edge where the upper part is connected with the bottom.
- Unfasten the lock and carefully sew the other hand pillowcases, departing from the edge of 1 cm.
You should have everything in the photo.
Cut unwanted parts of lightning from both sides.
- Free edges on the handle overlock.
How to sew a zipper in the cushion cover
In order to maintain a clean cloth napernika favorite pillow and possible to keep it from pollution, resourceful hostess trying to put on its cover under the pillow. Today, such cases can already be purchased at any store in the department of "bedding". But there is nothing easier than to sew a bag with zipper for cushions with your hands.
The main thing to choose the right fabric.
The first thing cut from the cloth two parts - front and back.
The procedure itself is much easier to sew. If sewing pillowcases will need to use a serger, the handle cover is not required.
The upper side of the lightning has to be twisted to the right side teeth upwards, and the lower it must be parallel.
Using a zipper foot on your sewing machine, start scribbling along the long side.
An exception is the case that will be stitched from different pieces of fabric. Especially if such a case is designed for large cushions.
Important! Proutyuzhte sure all seams are steam iron before you sew all the edges on the product. It is also possible to fix the finishing stitch seams 0.6 - 0.8 cm.
Finish sewing of 2.5 cm till the end of the opposite edge.
Start sewing again just above the zipper, close the hole. Repeat on the other side.
By choosing to cover cushions two different fabric colors and textures, you can achieve a unique and beautiful results.
Carefully cut off the excess length of the zipper.
It is not necessary to sew metal zipper or zipper "tractor". To cover is better to choose one-piece twisted lightning, which can be shortened if necessary.
Remove the pillowcase on the front side and insert the end of the zipper opening.
Your pillowcase is ready!
At the final stage of sewing, be sure to once again proutyuzhte all seams carefully straighten it and put it on a cushion.
Learn to sew pillowcase with a zipper, a snap to create a decorative pillow covers for chairs and sofa.
findings
Knowing all the secrets of how to sew the zipper in a pillow case or cushion cover, every housewife will be able to handle the job on their own. Including their design imagination is easy to sew pillowcases uniquely interesting species of varying the texture of fabric, coming up with a variety of design elements. A zipper on the product will make her only pillow more attractive and neat, but comfortable during the operation. Pick quality lightning up to 70 cm. Excessive lightning cut the piece already at the final stage of sewing.
