Cabinet for built-in appliances: the best design ideas

The arrangement of furniture and equipment in the kitchen is complicated enough, especially if the squaring of the small room. In this case, comes to the rescue of built-in appliances such as hob or oven. This design saves a lot of space to make a variety of kitchen design and modern.

What is it and why do we need?

Comfortable, modern and practical option for the kitchen - kitchen with integrated hob and oven. Such devices mostly have a separate design. Cooktop integrated directly into the table top. Oven requires a separate spot at the same time you can not put it on the floor. This requires a box for the oven.

Its essence lies in the fact that instead of the usual cabinet in the kitchen set is allocated a place in the oven. Usually it is installed under the hob, but you can choose any suitable place.

The box for the oven a required element in the kitchen, if he concealed type unit.

Kinds

Opting for the oven is built, you get an opportunity to diversify the design and kitchen environment. Unlike conventional ovens, combined with the cooking surface, the data is quite an independent unit.

In addition to the difference between the functions of the unit, there are several types of cabinets for the built-in oven. You can choose your accommodation option parting, the most suitable for the squaring of your kitchen layout and design.

There are two main types of designs: curbstone under the cooking surface with a drawer, or placing it in a pencil case (high cabinet with a special compartment and additional compartment). Each of these types has its own advantages and disadvantages. However, in the opinion of consumers, placing the oven in the cabinet-box were much easier to use.

Advantages and disadvantages

Let us detail the pros and cons of different types of baskets for ovens. For a start it is worth noting that the very design of the individual embedded oven has the advantage of convenient use, design, freedom of placement.

design Location in the cabinet under the cooktop

Pros:

- creating a common surface for food preparation;

- suitable for people of any stature;

- the preservation of the standard type stove with oven (for fans of classics).

Minuses:

- the need to constantly bend over in the cooking process;

- inconvenience in cleaning the oven;

- high probability of damage to the electronic mechanism due to hit on it a large amount of water from the stove while cooking.

Placement of the oven in the cabinet pencil case also has its advantages and disadvantages

Pros:

- location at chest level reduces the load on the back during the work;

- ease of maintenance due to the location;

- the ability to find the dimensions under any growth;

- it gives the kitchen a new, modern look.

disadvantages

The only drawback of this design is that it, being high enough off the floor, requires further strengthening. When installing it is necessary to see to it that has been firmly placed lower horizon. Otherwise, the oven may befall mistress feet in the process of cooking dinner.

Tips for Choosing

Having decided to buy built-in oven, considerable attention should be paid to the closet, where it will be located. You can buy it with the oven, however, they are often sold without boxes included. In this case, you will pick it yourself. What to look for when buying?

First of all you need to know the exact measurements of the oven. The height and depth of the box must be larger at 15-20mm for good air circulation. The difference should not be greater than, or have difficulty with the mount and install.

In advance take care of the electrical wiring. In the place of the oven should be pre-provided output wires because this type of construction does not fork, and requires a direct connection to the mains.

When choosing a box, make sure you have bars, reinforcing the horizon.

Also pay attention to the design of the cabinet and coloring so that it perfectly fits into the existing kitchen environment.

Whether to do with your hands?

For lack of a suitable conduit to selling the question arises, to make furniture to order, or to design all their own hands. In this case it is better to entrust the work to professionals. Especially it concerns the installation of the cabinet and the oven directly, as there is still need the skills of an electrician.

However, if you have experience in making furniture with their hands, to make the scoop under the oven without any problems. To do this, you need to make measurements of the appliance and in accordance with the drawing of the future product obtained data. Further, having the necessary tools (saw, screwdriver, electric drill, carpenter's glue) and materials (chipboard, countertop, dowels, SCREW furniture, screws, rails, feet for the box) you can easily make a case for its built-in oven hands.

But! If you doubt their abilities, entrust to professionals who will make the wardrobe under the order, in accordance with all your wishes.

Video: Connecting the oven

Best photos of built-in oven in the kitchen interior