Pretty soft furnishings decorate the kitchen and makes it much more comfortable. If you allow the floor area, in the dining area, you can arrange the kitchen. The advantages of such furniture lie in the fact that it saves space. And when properly selected, complete with table and stools, your kitchen will become a favorite place for gatherings for afternoon tea or coffee with family or friends.
Kitchen facilities must be not only stable, but also easy to use.
Make a corner in the home is not too difficult, even if you do not master. Almost all of the necessary materials and tools exist in any home.
The general rule acquisition (selection) of the material - its quality.
Content
- 1 General rules of furniture assembly
- 2 What tools are needed?
- 3 fastening materials
- 4 Preparation before assembling
- 5 The assembly process corner
- 6 Decor kitchenette
- 7 VIDEO: Video instructions for assembling a kitchen corner
General rules of furniture assembly
Each wizard begins with the production of furniture removal of the measuring point, where it will be installed. Assembling kitchenette involves binding a precise calculation of parts and preparation of drawings.
Kitchenette make with the base on the uneven bars with fins or thick plywood.
Materials are selected based on the preference. It can be wood or its derivatives:
- particleboard;
- Chipboard.
Pretty soft furnishings decorate the kitchen and makes it much more comfortable.
The general rule acquisition (selection) of the material - its quality. On this depends the reliability and safety of future construction. The kitchen should not be fumes from resins that are part of the DSP, therefore, it requires a coating selected neutral chipboard or wood. They must be carefully crafted and precisely cut at the size of the project.
For kitchen furniture upholstery materials used tend to accumulate grease.
Kitchen facilities are usually made soft, so necessary for the upholstery elements shown in the table.
| Filling | Padding polyester or foam rubber. |
| upholstery fabric | Flock, microfiber, suede, faux velvet, tapestry. |
The advantages of such furniture lie in the fact that it saves space.
The fabric is cut with a small margin. The filler is selected average density, its width - about 3-4 cm.
Manufacture of furniture such as a kitchen requires the accuracy and precision of calculations.
If the master is experienced enough, you can pick up a complex in the treatment of materials, for example, do not flock, and high-quality artificial or natural leather.
Kitchen facilities can be made of three parts.
To assemble the corners of the kitchen base material selected for the support structure of at least 20 mm wide, otherwise the connecting bolts or screws material will flake and crumble.
Make a corner in the home is not too difficult, even if you do not master.
When working with chipboard also need the edge band to match. It is cut after fitting the panels to size.
At home, some do more original corners - with two or three half-chair, each of which has its own full-fledged support structure.
You can make and modular area.
An important point: kitchen corners is not recommended with closed "foot" part - will be uncomfortable to sit, especially if the table has a direct bearing. The lower part must be made through to the legs can be moved freely.
If no solid support can not do, then do it better beveled - the lower part of the turn at an angle and will not greatly hinder legs.
Assembling kitchenette involves binding a precise calculation of parts and preparation of drawings.
The standard length for the kitchen area - about one and a half meters. Given that most dining areas in homes do not have a large area, this option is the most popular. The width of the range from 50 cm.
What tools are needed?
To assemble the furniture must be handy tools such as:
- screwdriver;
- hacksaw;
- stapler with staples;
- jigsaw;
- pencil;
- ruler or caliper;
- roulette.
The kitchen should not be fumes from resins that are part of the DSP, therefore, it requires a coating selected neutral chipboard or wood.
Jigsaw treated wood pieces - round off, make curly, etc.
fastening materials
You must also pick up screws (for solid wood panels), bolt-SCREW (for chipboard). To connect the parts take care of the acquisition of the steel parts.
Making furnishings in the dining area should be based on the overall style of the room.
Seat parts for the kitchen are mounted by means of special piano hinges. This makes the basis of reliable and durable. First, loops secured to the sidewalls by means of bolts, and then on the bottom seat panel. It is important to make a layout for them in advance to avoid distortions and, consequently, failures during operation.
When working with chipboard also need the edge band to match.
Preparation before assembling
To kitchen to look nice, its wooden parts trimmed sandpaper, and the outer edges after cutting the cover or varnish. Materials such as fabric and filler, require the availability of scissors tailor, the conventional cumbersome and cut unevenly.
Kitchen corners often made with curly legs and back.
The layout of fasteners for furniture made with a pencil and a ruler. Kitchen facilities must be not only stable, but also easy to use. Calculate the length of the main seat and paranasal (short) portion. Their ratio is generally - 3: 1 or 3: 2. This is a simple model consisting of two sites for the placement. It is possible to make complicated version, then the ratio of parts is 2: 1: 1, 2: 1: 2 or 2: 2: 1.
The lower part must be made through to the legs can be moved freely.
The master must be remembered that the quality of the finished product depends on the sequence of actions. Should not rush, and think everything through carefully.
Kitchenette make with the base on the uneven bars with fins or thick plywood. It should be firm, not loose. You can also use DSP.
The standard length for the kitchen area - about one and a half meters.
For kitchen furniture upholstery materials used tend to accumulate grease. Choose an easily washable fabric, on which there will be divorces while caring for her.
One of decoration options - corner with a luminous table - created with the help of fluorescent and polyurethane paints.
The assembly process corner
Manufacture of furniture such as a kitchen requires the accuracy and precision of calculations. Due to the modular construction the slightest misalignment can affect the stability of the product. Consider the simplest model of two parts.
- Prepare the reference panel. The side stand and as part of the backrest. It is recommended to make the pivot bearings immediately.
- Connect the backrest panel and support the main and side parts separately. Take universal glue, grease it and attach the seat foam (padding polyester), wrapped his bottom. Squeeze a few minutes (you can put something weighty).
- Glue the filler to the dorsal part and let dry thoroughly. Cut off excess flush with the sidewall.
- Pull the upholstery fabric and secure it with staples on the panels, pre-bent edge of the material.
- Secure the seat on the main and side via hinges so as to obtain a smooth corner. To do this, slide the long element on the distance at which adjoins short.
Kitchen facilities can be made of three parts. The steps to assemble the same, only it is necessary to make a corner piece (90 degrees), and then fasten all the parts. This process is time consuming, it is important to comply with dimensional accuracy to fit the remaining parts without gaps.
The layout of fasteners for furniture made with a pencil and a ruler.
You can make and modular area. You do not need to fix the parts to each other, and just need to put them side by side. This is handy when guests come and you can move one of sidushek on the other side of the table.
Wood require careful processing and grinding, to avoid burrs or protrusions and dents on cut branches.
Racks rear part can be omitted if the seated weight per area of 50 sq. cm. It is assumed to be more than 100 kg.
To kitchen to look nice, its wooden parts trimmed sandpaper, and the outer edges after cutting the cover or varnish.
Decor kitchenette
Making furnishings in the dining area should be based on the overall style of the room. Exposed parts of the back and legs can be coated with a varnish composition with a touch of natural wood - the most popular option. trimmed seats can be contrasted with the color of the legs.
Seat parts for the kitchen are mounted by means of special piano hinges.
Kitchen corners often made with curly legs and back. In the latter case, it is important that the decorative element does not enter the space of the spine leaning against - it is quite uncomfortable when sitting. Beautiful curves of the wooden parts can be designed with the help of the jigsaw. Finished elements varnish and well dried.
You must also pick up screws (for solid wood panels), bolt-SCREW (for chipboard).
To the corner, you can make two or three small stools upholstered in tone. So better to choose an oval shape. All together will look stylish single kit and create comfort in the kitchen. Take care of the appropriate lighting. Ideal for areas with wide area lights- "flip-flops" on the cord, the height of which can be adjusted.
Ideal for areas with wide area lights- "flip-flops" on the cord, the height of which can be adjusted.
In suburban homes, many prefer corners without upholstery, completely wooden - bench type, with open or closed (beveled) of the lower part. Look such products in conjunction with a wooden table in a tone quite stylish and beautiful, if the edges are rounded, and the tree has a nice texture. Wood require careful processing and grinding, to avoid burrs or protrusions and dents on cut branches. One of decoration options - corner with a luminous table - created with the help of fluorescent and polyurethane paints.
The width of the range from 50 cm.
