When installing the connecting pieces of furniture is convenient to use a drill, where a special use drill, with which you can select the waste material evenly and make a hole to the desired depth.
Furniture hinges affixed after treatment with bases such a tool, "sit" evenly and reliably.
To equip a drill suitable for a selected drill loops - the main problem when dealing with doors of furniture.
Furniture hinges affixed after treatment with bases such a tool, "sit" evenly and reliably. It is important to choose the correct diameter drill bits, depending on the parameters of the loop bowls.
Drill for furniture hinges - special milling head, which allows to work with wood and plastic substrates of sufficient width.
Choose Fraser elements should be in specialized stores.
Content
- 1 What is it and how to work?
- 2 Kinds
- 3 Advantages and disadvantages
- 4 How to choose?
- 5 VIDEO: Forstner drill
What is it and how to work?
Drill for furniture hinges - special milling head, which allows to work with wood and plastic substrates of sufficient width. Since it can be done right hole in whole panel web MDF, particle board or chipboard.
Since it can be done right hole in whole panel web MDF, particle board or chipboard.
You can find the standard and atypical drill with a certificate of quality and warranty from manufacturers.
The nozzle is a base with a jumper and three teeth. The median spike installed in the center of the future of the circle, which outline using harvested caliber, and the rest are doing the round hole of the required diameter. Usually the depth of the recess is finally made about 9 mm.
The nozzle is a base with a jumper and three teeth.
Too cheap elements - an indicator of low-quality product, so you should consider the options with the price of the average for the market.
Furniture loops that use a drill, mainly chetyrehsharnirnye. Hole for each is done almost instantly. Drill at work hold a little obliquely and not directly to the waste material has been selected to the desired depth and evenly.
Usually the depth of the recess is finally made about 9 mm.
This cutter is reliable and last a long time.
Kinds
When installing the loops are two types of drills are used on cabinet furniture, varying in size:
- 35 mm;
- 26 mm.
Hole for each is done almost instantly.
It is important to choose the correct diameter drill bits, depending on the parameters of the loop bowls.
The diameter is selected in accordance with conventional hinges or reduced cup. For each type of fixtures chosen his drill.
Since it can be done right hole in whole panel web MDF, particle board or chipboard.
The nozzle is a base with a jumper and three teeth.
A drill for mounting furniture hinges universal fit with the regime change nozzles.
Drill at work hold a little obliquely and not directly to the waste material has been selected to the desired depth and evenly.
The median spike installed in the center of the future of the circle, which outline using harvested caliber.
Milling machines used automatic calibration and nozzle, in the home the same conditions without special electric hand tools can not do.
The diameter is selected in accordance with conventional hinges or reduced cup.
For each type of fixtures chosen his drill.
Advantages and disadvantages
Furniture loops require precision during installation, so the ability to do exactly the deepening of what is necessary - the main plus drill Forstner. It provides a special focus, thereby preventing penetrate into the hole on the fixed length. Drill limited teeth without giving deviate from a predetermined location. The hole turns perfectly clean, so that the loops cup goes very tight.
A drill for mounting furniture hinges universal fit with the regime change nozzles.
At home the same conditions without special electric hand tools can not do.
Forstner drill disadvantage when working with solid wood blade can only be its low quality, characteristic nefabrichnogo production. Therefore, you must choose a product from an authorized provider, and seek an assurance.
Furniture loops require precision during installation, so the ability to do exactly the recess.
Depending on the type of panel cutter can strongly heat up, cauterize and edge material selected from the recess. Therefore, when working with such a basis is recommended to arrange breaks to cool the drill bit, doing 3-4 sets. This usually occurs with panels of MDF. In working with chipboard and particleboard elements of hard alloys allow you to make the holes for loops quickly and without much effort.
Drill limited teeth without giving deviate from a predetermined location.
How to choose?
To equip a drill suitable for a selected drill loops - the main problem when dealing with doors of furniture. The hole is precisely adjusted by the radius and depth, it is necessary to take the necessary cutter diameter.
| Chetyrehsharnirnye loop with the cup 35 mm | With these parameters and the drill bit must be appropriate. |
| Non-standard mounting | Require a suitable nozzle diameter. |
| Forstner drill | Suitable for wood and plastic panels of a thickness of 16 mm. |
The hole turns perfectly clean, so that the loops cup goes very tight.
The product must be from an authorized provider, and seek an assurance.
Choose Fraser elements should be in specialized stores. There you can find the standard and atypical drill with a certificate of quality and warranty from manufacturers. Too cheap elements - an indicator of low-quality product, so you should consider the options with the price of the average for the market. This cutter is reliable and last a long time.
Depending on the type of panel cutter can strongly heat up, cauterize and edge material selected from the recess.