Furniture for bath with his hands: schemes, instructions, photos

Bath needs a certain set of furniture, which should include a table, shelves, wooden benches. When choosing items for the bath furniture should take into account its specific features, such as high humidity. Heat and moisture inherent in the bath, "impose" special requirements to the choice of material for furniture:

• well-tolerated humidity;
• Furniture ability to withstand high temperatures;
• low heat conductivity;
• the material must not release toxic substances, hazardous to health.

The most suitable materials for the furniture in the bath

Based on the above requirements, the most suitable material for the bath is a tree.

• Conifers.

Pine and spruce are not suitable because they resinous wood and gum at higher temperatures and heating softens. Hot resin can cause burns, and body soiling. There is an option when removed from pine resin, but as a result of this process is a significant rise in the wooden material. Separate the degumming - a long and pretty difficult, so it is wise to choose a bath in wooden furniture made from hardwood trees.

If you still really want and can afford it, is the ideal choice of furniture for the bath is luxurious interior of cedar. resin cedar wood is not rich, texture most appropriate, but the cost is quite high. The advantages of the furniture for bath Cedar may include providing a significant improving effect on the organism by isolation from wood as a result of its heating oils. These oils are a great way disinfect, deodorize and beneficial effect on the skin and respiratory system.

• Hardwood.

With all the variety of hardwood species, preferred as a material for furniture should be given aspen and linden. These types of wood a pleasant light shade, perfectly transports the changes in temperature and humidity, at the same time without losing the original shape. In addition, the lime has a pleasant smell and is easily processed thanks to the softness. Among the shortcomings linden isolated fungus infection and exposure to rot, to combat which use chemical compositions which are highly undesirable in the pair.

aspen wood at first, too bright, but after some - while it starts to get dark. Aspen previously used for the manufacture of top wells, since it is well preserved with moisture and rot. From minuses - abrasion occurs wood fibers and cause nicks and scuffs. The cost of lumber aspen is very low.

• Exotic species.

As an exotic variant of the material can be used abashi tree that grows in Africa. Its color tone changes as the temperature raise around from milk or light - yellow to dark - brown. At the hottest temperature in the steam room, the tree is not heated above body temperature, therefore burning is not from him. The downside is that this stuff is not cheap costs.

If we talk about the timbers for the rest of the premises, it is necessary for washing breed responds well to humidity, for locker rooms and lounges - all.

From what things should be set bath furniture

You need to navigate to individual tastes and financial possibilities, but there is a certain minimum standard.

• In the sauna bath should be made shelves. They can have different shapes and sizes: single-stage or have a few steps; located along the walls of the bath or be in the form of "G", "P". Often placed in the steam room wooden headrests and supports under the legs. Due to the fact that the place where steamed small, it does not need to clutter up unnecessary items, as they will serve as a barrier to air movement. For convenience, you can add a small bench to accommodate basins and buckets and attach hooks.
  

  Shelves are the most important component of the bath interior and make the most of their quite simple and not expensive

  

  Kinds and shapes of shelves for bath

• The washing compartment baths must be equipped regiment, and can be produced by various configurations and sizes of the shop. It is useful to be here for details such as stools for tubs, buckets and other utensils of bath. Away from possible splashes placed hanger.
  

  Driving and benches for drawing baths of wood

Production of furniture for the bath alone

You can make simple furniture for the bath with his hands, if we use the tips. Independent production allows to realize all your wildest fantasies and optimally use of the space bath, designed for the most comfortable stay, in accordance with their tastes and preferences.

First we need to decide on the design and construction. To do this, depending on the size of the bath room should be made of items of furniture layout inside, identified by their size and shape. Well, if everyone in the bath will be done in the same style and chosen according to the intended number of people.

In the manufacture of furniture with his hands is important to a well-crafted details: rounded edges, surface sanded smooth to absolutely state. To avoid burns from metal screws caps, their utaplivajut 5 mm in depth, and the top covered with wood putty. None of the items for the bath of the situation should not be lacquered.

Production of shelves in the washing bath

Since the shelves situated in a high humidity, and the timber will affect the temperature differences must consider the structure with great care.

For maximum comfort shelves is better to do a wide (800 mm), and more preferably 1 m. The length of it is to match the growth of visitors baths.

The height of the construction is done with reference to 0.8m.

• The measurement of the distance from wall to wall, which will be located shelves. Necessarily need to leave a small gap (about 10 cm) for ventilation.
• Formation of the carcass using boards with galvanized corners. Their length is equal to the length of the room, and the width - 60 cm approximately.
  

  Manufacturing of the carcass bath regiments

• Frame screwed to the wall parallel to each other. To avoid skewing use level.
• The vent shall be made on the outside finished the trails. Next, the assembly of wooden slats.
• The frame is attached to the frame and is fixed by screws to a wall.
  

  Upper shelf, planked

• Similarly, manufactured and installed shelves, which will be at the bottom. Its width will u̕̕zhe (40 cm) and the length is the same as that of the upper.
  

  Cross bracing lezhanok skin

• Shelves at its base may have a grating made of wooden planks. From it you can make and the back of the furniture.

If the shelf is made with the expectation of tall people, the "small" climb on his problematic. Therefore, in the steam bath must be put ladders, benches, width about 40 cm, and various heights. They represent the three-centimeter strips, carefully polished, with thick legs stable.

Production of wooden benches

This item is required for use as a replacement for the bottom of the shelf supports for the feet, basins and buckets.

To make a bench with your hands you must:

• sawing the bar into several pieces of 40 cm (future support);
• transverse strut 60 cm long are cut from the other bar;
• nail bottom support, a top attached to seat base formed of boards in a 1 m long;
• sheathe base benches with wooden planks, leaving a gap of 1 cm;
• finished furniture cover antiseptic, available in the vegetable oil.

How to make a wooden table in a bath

dayroom not do without such a small size. This piece of furniture in the bath should comply with all the requirements relating to the furniture in a damp room as a waiting room is also susceptible to temperature changes, as well as a steam room.

• Cut board 5 parts of 2 meters for countertops.
• From one bar to make the workpiece 150 cm long for bonding the table legs.
  

  Billets carefully grind machine or sandpaper

• Formed from harvested countertop boards.
• Stepping from a short side of 30 cm, with five screws attach a narrow beam. From him, retreating 35 cm, mount the same block. Closure bars cut down by 45 °.
• Do the same on the other side.
• The legs are made of bars 70 cm in length. To impart stability made supports (4 pcs.) Of trapezoidal shape. Angles trapezoids must be 45 °.
  

  Prepare the table leg

• To assemble the legs, you need to insert a rod segments (70 cm) Intermedia blanks and secure desktop design.

• Table legs are inserted between the two bars attached to the top.
  

  Make two spacers and fasten them to the legs flat on the table according to the scheme

• All items of the table must be fastened using self-tapping screws.
• Harvested earlier board (150 cm) inserted between the legs and strengthened.
• Jigsaw All items must be round.

conclusion

Carrying out assembly work in the bath furniture, boards should be placed together tightly, leaving small gaps. So dare to question diverting water from the washing room and steam baths, a timber venting. In addition, the boards at differences temperature and wet mode can be compressed or expanded, and left gaps provide them the space.

Upholstered furniture for relaxing in the bath, it is better not to put, because for her a good ventilation system removes excess moisture must be provided.

Video: How to make a shelf in the bath

50 ideas for inspiration and making furniture for the bath with his hands: