Mattress for a double bed: features selection for family bed

Statistics show that 80% of the population of the CIS countries disrupted the musculoskeletal system. The figures show that violations occur in children of school age, so it is believed that the main The reason - the wrong way of life before the age when there is a formation body. But the doctors began to notice that an important role in the health of the spine plays a dream, but it is the right choice of a place to sleep and positions for relaxing.

Insomnia, back pain at night or in the morning after waking up, the tension in the body - it's the first alarm bells about the violations in the musculoskeletal system. Accordingly, they need to pay attention and think about the correctness of the choice of the mattress.

It is always difficult to decide on a mattress on the double bed for families. Often, it is convenient for her husband, then the wife is a painful and vice versa. This is the reason that couples older than 35-45 years of age slept separately. But as a young man loving each other people are dreaming, they later in life will wake up together. To realize this dream may be the right choice for a family bed lounger.

Healthy people it is important to think about how to choose a mattress for a bed. After all, the right decision will mean a healthy, sound sleep at night and a comfortable rest to him.

5 signs the need to replace soft lodgesbut

Under the statement of experts, mattresses can be used no more than 10 years, which is not as long as it seems to the common man. In this case, the maximum term can work this product if it has a minimal load. In case of frequent transfers, coups double mattresses deteriorate much faster. Of course, the main sign of the need to replace the mattress is not sufficiently comfortable day rest or night's sleep. But there are also other characteristic signs of wear.

1. skin damage.

When the holes in the shell, the mattress changes its characteristics, since the volume is redistributed springs, foam or latex. This leads to the fact that the body assumes a different position, likely causing pain in the back.

1. The shell is intact, but feels like body scratch ends of spring metal grid.

This damage mattress may seem insignificant, but it will lead to the destruction of skin and the above-described effects.

1. Mattress emits unpleasant creaking sounds.

It is clear now that there is discomfort from any movement that can disrupt sleep holders of old products.

1. The mattress was deformed, there were holes, humps, change stiffness.

It is only natural that these changes will lead to curvature of the spine, and his illness.

1. Rest or sleep on an old mattress was the end fall on the floor or rolling up one place to another.

Specialists and doctors strongly recommended for the appearance of these features make the change, and understand how to choose the right mattress for a double bed. To better understand the features and selection criteria, it is necessary to disassemble it types.

Types of double mattresses

All family mattresses are classified in many ways, but the most characteristic of them is its composition.

In composition, the product is divided into categories:

• springless;
• spring;
• combined.

1. spring mattresses

Based on the springs, the most common. They are divided into dependent and independent.

The first type, otherwise called "Bonnel" represents a steering foam and fabric frame, within which are enclosed the combined spring units.

This model was developed in 50-60 years. Of its advantages is the lowest price of all types of mattresses and relative durability.

However, the double beds by a high number of disadvantages:

• deformation of spring units;
• embrittlement of the metal from which the spring;
• load balancing impossibility, which is why an easy family member will slip into a more severe, which can all fall to the floor;
• lack of isolation springs, so there is an unpleasant the creaking of a mattress;
• a bad effect on the musculoskeletal system health.

The second type is fundamentally different from the first. The essence of this type of mattress that it consists of independent, not interconnected barrel-shaped springs, each spring furthermore is isolated and stored in a special envelope. In general, these comprise a spring stiffness blocks that make up the family has mattresses for beds. This design relates to medical orthopedic products. What is interesting for the whole area can be used with different spring stiffness. This is done to ensure that spouses who have different requirements for the sleeper, could pick out one big mattress to bed, where they will sleep comfortably and not slide anywhere on the bed or sink into the slot middle. In addition, if it is reversed, you can get a mattress with different characteristics.

This design is considered as the most longstanding and comfortable and has the following advantages:

• It relieves pain and heals the musculoskeletal system;
• wide range of sizes;
• quiet during use.

But this almost perfect mattress has its drawbacks. For many large barrier to purchase it will be a considerable cost, which will not be able to master each. Still it is very important that each person has an individual musculoskeletal system, which is needed to restore the mattress with a certain stiffness characteristics and sizes. This means that to buy such a thing to be very careful, because if you select the wrong one can stay with the old spine pain. Features choice, you need to know will be described below.

1. springless mattresses

Marketing studies show that the post-Soviet space, almost everyone is familiar with type mattress where the springs replaces elastic material, which is used as furniture foam. This material has high physical properties such as elasticity, thermal conductivity, density and rigidity. But the foam can deteriorate quickly under certain effects, since it has a low compressive strength and rupture.

Therefore, this foam is replaced by a combination of modern dense and elastic materials having a much improved performance figures:

• latex;
• web horsehair;
• Coir;
• a kind of modern polyurethane.

Springless mattresses of this design is considered therapeutic and orthopedic because the characteristics are approximate to the above-spring mattresses with independent blocks.

In addition, the family beds that have high operational performance, they have a pretty nice prices. We can not say that the cost will be very low. The figure seems the buyer middle ground between cheap "Bonnel" and expensive mats with independent spring blocks.

But, despite the attractive price, it is impossible to say that this type of double mattress is the best option for couples. The problem is that the web is in the article is in one piece over its entire area, so when uneven distribution of loads can occur hammock effect, but to a lesser extent than sunbeds "Bonnell" type.

combined mattresses

For those occasions when a couple chooses a mattress with different weight problems or musculoskeletal system, combined types of sleeping products have been developed. Their main difference from the usual can be considered that they are versatile. Thus, from the husband it may be more stringent with independent spring block, and the wife webs consist of combinations of polyurethane, latex, coconut coir and horsehair.

Found another type of double combined springless mattress with springs. This combination of product sheets placed on top of coconut coir and polyurethane, and the bottom is spring block. Thus, such lounger can be reversed from one side to another, foam mattresses used in a broader profile.

The third type is a combination of products, where the spring units are placed in the middle, and are surrounded by man-made elements.

It should be noted that the ultra-modern bedroom bed have been developed that have a "shape memory", heating and water-based. There are mattresses, massagers, divided into several sections, comfortable neck, back and legs.

Especially the choice of a double bed mattress for family

When choosing a bed to remember an important detail - not worth buying furniture complete with a mattress or bed family first, and then a sunbed. In the first place individually chosen a suitable mate, and by its size is chosen and ordered bedroom furniture. This is the main rule of how to choose a mattress for a double bed.

Do not buy a separate two different mattress, because they will cause great inconvenience to use, from different level, a gap between them and ending with the fact that the products can move around the bed area, make noise, do not clearly increasing comfort.

If the cervical and dorsal spine is not healthy, it is necessary to abandon the idea of ​​buying a mattress springs on the dependent. It will create the effect of a hammock. Accordingly, the spine will not be able to take the correct position during sleep and will get sick.

When the total product purchase rules are described, it is necessary to tell you how to choose a mattress for a double bed.

The primary parameter of the mattress on which you need to pay attention to is the rigidity and maximum weight that can withstand the product. The main task of the mattress is to keep the spine is constantly in the horizontal position without any bends. This means sunbed must fully skirted the body in a certain way to meet this requirement.

Based on this it is important that the ratio of weight and stiffness were evaluated correctly. This will eliminate the error as much as possible.

Developers, on the basis of operating experience, have developed these recommendations:

• weighing less than 55 kg, and must be used for children the product of independent spring units lower foam stiffness or lesser strength or elasticity;
• weighing less than 90 kg and for people older than 50 years must be chosen mattress with averages;
• with a weight over 90 kg should take the toughest lounger.

Dimensions are less important than the previous options, but remember they are not worth it. When buying a mattress for a double bed are guided by these rules:

• the length of the mattress must be greater than the maximum of its owners increase of 15-20 cm, which provide full control of body position, his relaxation and recreation;
• the width of the product must be at least 160 cm, but in this case we must proceed of the features of the master figure, as similar length parameter is required reserve area to a person lying on the mattress, I felt as much as possible comfortable.

The important role played in the comfort of upholstery. It should have sufficient thickness, shell ensures good strength at break of the mattress. Modern fabrics for upholstery should have-dust, anti-allergenic properties. The fabric should create together with the whole breathing system design to reduce irritation of the skin, increased sweating.

As you can see, the subtleties and "gotchas" when choosing a mattress for a double bed abound, so the process of purchase must be approached very carefully and responsibly. Bought a mattress should be comfortable for you, reducing power berth for the next ten years.

VIDEO: Quality Formula: How to choose the right mattress

50 photo ideas how to choose a mattress for a double bed