Washing machine Indesit - malfunctions

Washing machines of the brand "Indesit" can break, like any other technique. In this article, we will consider in detail if you have an "Indesit" washing machine, which faults occur most often.

Important! The main causes of breakages, as a rule, are blockages of the elements of the unit, the presence of foreign objects inside the washing machine, getting there along with clothing, negligent attitude to the equipment and non-observance of the operating instructions.

to the contents ↑

Common faults and their possible causes

The most frequent malfunctions of the Indesit washing machine are caused by the failure of the following parts:

1. The heating element - TEN of the Indesit washing machine is often broken, as it is not protected by a coating from scale. This problem is considered the most popular among models of washing machines of the Italian brand.
2. Mains filter - breakage is often found due to factory rejection. Usually this element fails 3-4 years after the purchase of equipment.
3. Bearings - their fault repairing the washing machine "Indesit" with your own hands makes it much more difficult. The difficulty lies in analyzing the tank, which in most units is an integral structure.
4. Control panel - for washing machines, especially for those produced before 2012, the control unit is very vulnerable to breakdown due to poor quality of materials.
5. Engine condensers - repair is not possible with their combustion. The only option is a replacement.

Warning! The list does not include problems with filters and hoses, since they are frequent for all washing machines and are not typical breakdowns of the Indesit technique.

to the contents ↑

Is it possible to repair the equipment yourself?

All the malfunctions in the washing machine can be divided into two categories:

1. Problems that do not require a call of the master - here the troubles of the washing machine "Indesit" are eliminated and repairs are performed by one's own hands.
2. Cases in which the call of the master to the house or contacting the service center is inevitable.

Important! Repairs by the hands of the malfunctions of the washing machine "Indesit" are possible only in cases where:

• there is no smell of smoke, burnt or burnt plastic;
• on the display there is an error code( for electronic models), instead of flashing several indicators at a time;
• no leaks.

In other cases, you can safely get down to business.

to the contents ↑

Breakdowns and solutions without the assistance of an

specialist These include the following:

1. The machine does not turn on - see if electricity is coming and how tightly the plug fits into the outlet. Perhaps there is no contact, which is easily eliminated by one hand movement.
2. Water does not enter the drum - the cause may be in the loose fit of the hatch, the bent hose or the closed water supply tap. Check if everything is in order with the pressure. The pressure drop in the system can also be one of the reasons for this problem.
3. The technique works, but the washing does not start - most likely, the delay function of the wash cycle is activated or the water supply valve is closed.
4. The water is continuously poured into the drum and back - it is also possible to repair the washing machine "Indesit" with your own hands. In this case, it is most likely in the hose. It should be located at least 70 cm from the floor along the entire length. Check if the hose outlet is under water.
5. Strong noise during washing - it is possible to penetrate foreign objects into the drum. Stop washing to eliminate the problem.
6. A lot of foam - the reason for the incorrect selection of detergent. In this case it is necessary to replace it.
7. After rinsing, the water does not go away - exclude the possibility of kinks and blockage of the hose. If everything is in order, it is worth checking whether the functions are activated: "wash without draining", "easy ironing", "no pressing".
8. Excessive vibration during spin-up - check the position of the washing machine: the wall and objects are not touching the unit, it is even on the floor. The reason can also be in the position of the laundry. Vibrating, the machine is trying to evenly distribute it.
9. Indicators of some functions, for example, locking the hatch and the current washing stage, turn off the equipment for a few minutes. Maybe she just needs a break from work.

Important! All these faults of washing machines "Indesit", as you saw, arise either because of incorrect maintenance of the system, or as a result of elementary negligence. Disassembly of equipment is not required.

to the contents ↑

Repair with the

wizard It is better to immediately diagnose and troubleshoot the Indesit washing machine if the service center:

• The unit is unstable;
• The machine does not turn on;
• There is a lot of noise, grind, rumble when washing;
• The drum does not start;
• The spin function does not work;
• Leaks are observed;
• Water does not pour or go;
• There is a smell of burning, smoke, plastic.

Important! If any of these symptoms are detected, it is not recommended that you continue to use the washing machine to clarify the reason for this behavior and complete diagnosis of the problem. It may be dangerous!

Without a specialist can not do - list of breakdowns and their causes:

1. The washing machine does not turn on when buttons are pressed or the indicators blink - there are a lot of reasons. In this case, there may be a breakdown in the control panel, sockets, cord, plug, start button, door locking device, pressure switch.
2. Washing cycles are not performed correctly - their duration is shortened, the washing is delayed, the machine requires a mechanical switch to spin or the mode of draining the water, does not heat the water - a problem in the electronic control, the water temperature regulator or the heating elements. Repair of the washing machine "Indesit" with their own hands in this case is also impossible.
3. Strong noise, rumbling, squeaking - if the presence of foreign objects in the tank is excluded, the reason may be in the wear of the stuffing box, breakage of bearings, looseness of the counterweight or shock absorbers.
4. The drum stands still - another belt is needed, the drum power supply circuit or its drive is repaired.
5. The water does not go out / not typed - clogged filter of solenoid valve, sewerage, drainage system. The problem can also be in the breakdown of pumps, electronics, breaks in the power circuit.
6. The spin function does not work - the tachometer, the electric module or the button that turns off the spin has broken.
7. Leaks - the integrity of the connections is damaged: hoses, pump nozzles, tank door seals.
8. Extraneous odors - failure of the heating element, shortage of electricity.

to the contents ↑

Error codes of the washing machine Indesite

The break code is a Latin letter F with a number that corresponds to a specific problem. The combination in the event of a malfunction in the unit is displayed on its display.

Knowing the fault codes of the washing machine "Indesit" helps them to solve their problems on their own or to assess the degree of failure before the arrival of a specialist.

Important! Codes differ depending on the series. For example:

• error codes washing machines Indesit series "2000" range from F01 to F11;
• in the series "Evolution" - up to F12;
• with drying - up to F15.

The values ​​of fault codes and solutions are discussed further.

F01

Indicates a short in the control circuit of the drive motor. When the display of this error is:

1. Check the version of moisture on the contacts of the electronic controller.
2. Avoid corrosion of the drive motor contacts.
3. Replace the electronic module.

F02

Drive motor malfunction. In the event of such a malfunction of the Indesit washing machine, it is necessary: ​​

1. Check if the motor is blocked due to a broken bearing or other reasons.
2. See how firmly the electronic module is connected to the drive motor.
3. Investigate the resistance of the winding tachogenerator.

Important! If the reasons are a failure of the drive motor or electronic controller, it is necessary to replace them.

F3

This refers to the closure of the temperature sensor circuit or the "sticking" of the heating element.

When this error is detected, the following actions are performed:

1. Check whether the electronic controller is securely connected to the temperature sensor.
2. Measure the electrical resistance of the latter.
3. Replace the broken device.

F04

Problem in the water level sensor.

If the fault of the Indesit washing machine is accompanied by the display of this code on the display, it is required:

1. Check the sensor and its connection to the electronic module.
2. Replace the pressure switch or controller, depending on the fault.

F05

There is no signal "empty tank" after draining the water or the drain pump does not work.

Problem Solving:

1. See if the electronic module is securely connected to the drain pump.
2. Check the condition of the drain hose and filter.
3. Measure the mains voltage of the drain pump contacts when turning on.
4. Replace the hose, pump or electronic controller, taking care of the fault.

F06

Error in the operation of the buttons. In this case, you need:

1. Check the buttons for damage.
2. Find the faults of the connections and harnesses that connect the control panel to the controller.
3. Eliminate the cause of the malfunction of the Indesit washing machine.

F07

The heating element is not immersed in water. To prevent the heater from burning, it is necessary: ​​

1. Check that the water level sensor is working properly.
2. See if the Gulf system is clogged.
3. Measure the tap water pressure.
4. Check that the heating element is working.
5. Evaluate the reliability of the connection of the contacts between the water level sensor and the electronic module.
6. Replace the failed components.

F08

There was a "sticking" of the TEN relay. In this case:

1. Make sure the water level sensor is working properly.
2. Check the heating element.
3. Evaluate the reliability of the connection of the controller and TEN contacts.
4. If everything is ok, you need to put a new electronic module

F09

The program failed. If you see this error on the display, you need to replace the microcircuit or reinstall the program.

Important! The chip should fit the specific model of the Indesit washing machine.

F10

The tank is not receiving the appropriate signal. To start the water heating process, you need:

1. Eliminate problems with the water level sensor, if any.
2. Check the quality of the sensor connection to the electronic module.
3. Repair if necessary.

F11

There is no signal that the pump is operational.

To restore the power supply circuit or eliminate the breakage of the drain pump winding, depending on one of the options, you should:

1. Check whether the pump is properly connected to the electronic controller.
2. Measure the resistance of the winding.
3. Replace parts.

F12 ​​

No connection between the indicators and the electronic module.

When repairing the Indesit washing machine with your own hands it is necessary: ​​

1. Check the communication quality between the controller and the indicating module.
2. Eliminate the cause of the failure by replacing the elements.

F13

Connection circuit of the drying temperature sensor to the controller is broken.

To resolve the problem, it is required:

1. Check the reliability of the connection in the circuit.
2. Replace the drying temperature sensor and electronic module.

F14

The drying mode is not activated.

In this case, it is important:

1. Investigate the quality of the heating element connection to the electronic module.
2. Replace both parts.

F15

Do not switch off the drying mode.

Seeing this error, you should:

1. Check the connection board;
2. Evaluate the operation of the level sensor.
3. Replace items with serviceable ones.

F16

Violation of the lock of the drum.

Important! The error is typical for washing machines "Indesit" with vertical loading.

F17

No locking of the loading hatch.

For F16 and F17 errors, we recommend:

1. Check the electrical voltage.
2. Replace the hatch lock.
3. Check the connection of the components.
4. Buy a new electronic controller.

F18

Breakdown of the electronic controller. The problem in this case is eliminated only by replacing it.

to the contents ↑

Demo mode: how to configure?

The problem of exit from the demo mode and its settings is relevant for many owners of technology. Often because of ignorance, buyers take him for a malfunction of the washing machine "Indesit".

The instructions of many models of this brand contain little information about this.

Let's look at how to control the demo mode.

Switching on the

To turn on the washing machine, you should press and hold the button for a few seconds at a time: 3 buttons:

1. "Start";
2. "On-Off";
3. "Easy ironing".

After the "dEpo" code appears on the display, the mode is considered to be on. To activate it, click "Start".

Exit from

mode With the same button, the program is disabled. To turn it off, press and hold for a few seconds.

Exit from the mode is the same as the input: by pressing the above buttons at the same time until the code "dOFF" appears.

We hope that with the help of our article the malfunction of the washing machine "Indesit" you can easily eliminate yourself. We wish high-quality work of your equipment without failures and breakages. And remember - the duration of its operation depends on the observance of simple rules. Careful attitude to the devices significantly increases their service life.